Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Plastics Application》 1999-12
Add to Favorite Get Latest Update

CAE ANALYSIS OF THE INJECTION MOLD CASTING SYSTEM FOR THE AOTUO CAR BUMPER

Dong Xiangrfiong, Li Nianwei, Shen Honglei (Sichuan University, Chengdu 610065)  
The hot runner technique and the gas-assisted injection molding technique were summarized at first, then a large-scale in- jection mold, producing the front bumper of AOTUO oar, was designed optimally with CAE tool C-MOLD. After the geometry model of 3D including runner system, nozzles and meshes were built, the injection material, machine and process were all assigned. Next, a successful resin injection molding CAE analysis had been accomplished. The results showed that the hot runners, 4 gates, 4 gas channels and 4 nozzles were the best design. In the end, these results also illustrated that the hot runner technique and the gas-assisted injection molding technique can be used in large-scale injection molds completely.
【CateGory Index】: TQ320.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved