Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Plastics Application》 2002-12
Add to Favorite Get Latest Update


Yan Litang, Sheng Jing (College of Material Science and Engineering, Tianjin University, Tianjing 300072, China)  
The flow simulation software C-MOLD was used to carry out the gas-assisted CAE simulation analysis to the front panel mold structure design of the color TV. By comparing and analyzing some options the finger-effect of the gas-assisted injection molding of front panel mold of the color TV is solved and the satisfactory molding effect is acquired. The result shows the success rate of the mold which is tried firstly is improved and the cost of the mold is diminished if the three conditions which are important for the use of the gas-assisted molding technology including the filling pattern of the melt, the design of the gas channel and the gas-assisted molding process are simulated and analyzed by the CAE software during the design of the mold.
【CateGory Index】: TQ320.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 4 Hits
1 He Bin(College of Electromechanical Engineering,Qingdao University,Qingdao 266071,China);APPLICATION OF GAS-ASSISTED INJECTION CAE TECHNIQUE IN DESIGN OF INJECTION MOULD FOR COLOR TV FRONT CABINET[J];Engineering Plastics Application;2006-05
2 CHEN Huai-min(School of Mechanical Engineering,Jimei University,Xiamen,Fujian 361021,China);Application of gas-in via nozzle gas-assisted technology in moulds[J];Die & Mould Industry;2009-01
3 ;The Application of CAE Technology in Gas-Assisted Injection Mold Development[J];Die & Mould Manufacture;2006-07
4 LUO Zhang,LIU He-sheng,JIANG Xiong-xin,LAI Jia-mei,HUANG Xing-yuan,XIONG Ai-hua(Polymer Processing Research Lab,Nanchang,Jiangxi 330031,China);Flow Simulation Analysis of Gas-Assisted Injection Molding for Complex Shell Plastic Parts[J];Plastics;2011-02
Chinese Journal Full-text Database 1 Hits
1 ZHOU Hua min 1, YANG Xiao zhi 2, YAN Li tang 2, LI De qun 1 (1.State Key Lab of Mould & Die Technology in HUST, Wuhan 430074, China; 2.Qingdao Haier Mould Co., Ltd., Qingdao 266101, China);Optimal Design with CAE for Front-Boards of Net-Air-Conditions[J];China Plastics;2001-04
Chinese Journal Full-text Database 2 Hits
1 Liu Faqian, Yan Litang, Hu Haiqing, Liu Bo, Li Rongxun, Liu Guangye (Key Lab of New Material in QDICT, Qingdao 266042);OPTIMIZATION DESIGN OF MOLD RUNNER FOR REFRIGERATORY ACCOUNTERMENT[J];Engineering Plastics Application;2002-05
2 YAN Li-tang, LIU Fa-qian, LI Rong-xun, LIU Bo, CHEN Gui-Lan,,LIU Guang-ye (Key lab of new material in QDICT, ShanDong 266042, China);Application of CAE in Runner System of Air Conditioning Tray[J];China Rubber Technology & Equipment;2002-06
Chinese Journal Full-text Database 10 Hits
1 Chen Xu, Shen Changyu, Wang lixia, Chen Jingbo, Liu Chuntai, Wang Guozhong (Zhengzhou University of Technology 450002);CAE TECHNOLOGY FOR CAVITY FILLING DURING GAS-ASSISTED INJECTION MOLDING[J];Engineering Plastics Application;1999-02
2 Wang Dongyan, Qu Xiaozhong, Liang Ruifeng (State Engineering Research Center of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100080);APPLICATION OF GAS-ASSISTED INJECTION MOLDING TECHNOLOGY IN COLOUR TV CABINET[J];Engineering Plastics Application;1999-02
3 Chen Jingbo, Shen Changyu, Li Qian, Liu Chuntai (Zhengzhou University, APPT NERC 450002);DEVELOPMENT OF PLASTICS INJECTION MOLDING TECHNOLOGY[J];Engineering Plastics Application;2002-02
4 Shen Honglei Dong Xiangzhong (Changzhou Institute of Technology, Changzhou 213002, China) ( Sichuan University, Chengdu 610065, China);THE INFLUENCE OF PROCESSING PARAMETERS ON THE RESULT OF GAS-AIDED INJECTION MOLDING[J];Engineering Plastics Application;2003-02
5 Zheng Jianhua, Qu Jinping, Zhou Nanqiao (National Engineering and Research Center of Polymer Frocesaing Equipment, SCUT,Guangzhou 510640, China);ADVANCE IN THE RESEARCH OF THE WATER-ASSISTED INJECTION MOLDING TECHNOLOGY[J];Engineering Plastics Application;2003-07
6 SONG Zhao-yuan1,2, LIU Xiao-dong1, TIAN Wu-lin2, LI De-chun2 (1. Institute of Optoelectronic Technology Dalian Nationalities University, Dalian Liaoning 116600, China; 2. Liaoning Hisense Electronics Co., Ltd., Fushun Liaoning 113006, China);Designing TV Cabinets Using Gas-assisted Injection Molding[J];Journal of Dalian Nationalities University;2004-05
7 QU Xiao zhong, LIANG Rui feng, CHEN Rong, WANG Dong yan (National Engineering Research Centre of Engineering Plastics Institute of Chemistry, Chinese Academy of Science, Beijing 100080, China);APPLICATION OF GAS-ASSISTED INJECTION MOLDING FOR PLASTIC FURNITURE PARTS[J];POLYMERIC MATERIALS SCIENCE & CNGINEERING;2000-02
8 Sun Zhibin, Fu Peifu, Liang Jicai, Li Xiaoming(Roll - forging Technology Research Institute, Jinlin University of Technology, Changchun, 130025);Gas Assisted Injection Molding Technology[J];China Synthetic Resin and Plastics;2000-02
9 Sun Zhibin, Fu Peifu, Liang Jicai, Li Yi(Roll - Forging Technology Research Institute, Jilin University of Technology, Changchun, 130025);Study on gas assisted injection molding techniques[J];China Synthetic Resin and Plastics;2001-05
10 YU Tong-min 1 ,LI Kun 2 ,ZHANG Hao 1 (1.Dalian University of Technology,Dalian,Liaoning116024,China; 2.Shenzhen LiQi Wire and Cable Co.,Ltd.,Shenzhen,Guangdong518109,China);The Development and Application of Water-Assisted Injection Moulding Technology[J];Die & Mould Industry;2004-05
【Secondary References】
Chinese Journal Full-text Database 3 Hits
1 Tan Guichun, Zhao Zhihong, Zhang Xiaoyun (The Magazine House of EPA, Jinan 250031, China);ADVANCE IN PROCESSING TECHNOLOGY OF ENGINEERING PLASTICS OF CHINA IN 2006[J];Engineering Plastics Application;2007-06
2 Zhang Jinbiao,Zhang Xiqin(Changzhou Institute of Mechatronic Technology,Changzhou 213164,China);RESEARCH ON PROCESS PARAMETERS OPTIMIZATION OF GAS-ASSISTED INJECTION MOLDING BASED ON ORTHOGONAL TEST METHOD[J];Engineering Plastics Application;2009-03
3 ZHANG Yan-yun,GENG Tie,REN Qing-hai(School of Mechatronic Engineering,The Hen Nan University of Technology,Zhengzhou 450007,China);On the research of gas-assisted injection molding[J];Machinery Design & Manufacture;2011-02
China Proceedings of conference Full-text Database 1 Hits
1 ;注塑CAE技术在优化产品设计中的应用[A];[C];2007
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved