Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Plastics Application》 2003-02
Add to Favorite Get Latest Update

THE INFLUENCE OF PROCESSING PARAMETERS ON THE RESULT OF GAS-AIDED INJECTION MOLDING

Shen Honglei Dong Xiangzhong (Changzhou Institute of Technology, Changzhou 213002, China) ( Sichuan University, Chengdu 610065, China)  
Taking the front-bumper for example, the quantitative analysis of the parameters influencing on the result was introduced using the method of orthogonality and computer-aided engineering. In gas-aided injection molding, every processing parameter has influence on the molding result, the delay time has the most apparent influence on the result, the injection pressure is the second and the shot capacity is the smallest.
【CateGory Index】: TQ320
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 8 Hits
1 Tan Guichun, Zhang Xiaoyun, Liu Hongchao (The Magazine House of EPA, Jinan 250031, China);ADVANCE IN THE PROCESSING TECHNOLOGY OF THE ENGINEERING PLASTICS OF CHINA IN 2003[J];Engineering Plastics Application;2004-06
2 Zhang Huimin, Zhou Guilian, Jiao Dongmei (Qingdao University of Science and Technology, Qingdao 266042, China);INFLUENCE OF PROCESSING PARAMETERS AND GAS CHANNEL STRUCTURE ON MECHANICAL PROPERTIES OF GAS-ASSISTED INJECTION MOLDING PARTS[J];Engineering Plastics Application;2004-06
3 Wang Yujie, Huang Mingfu, Chen Jinnan (School of Chemical Engineering and Environment, Beijing Institute of Technology, Beijing 100081, China);Advance of Research on Injection Molding Technology[J];Guangdong Chemical Industry;2007-02
4 YU Ling, FU Jian(School of Material Science and Engineering of Xihua University, Chengdu China);Effect of Gas-Assisted Injection Processing Parameters on the Capability of Gas Penetration[J];Guangdong Plastics;2005-09
5 ;工艺参数在气辅注塑成型中的活用[J];Die and Mould Technology;2004-05
6 LI Guang-ming,FU Jian,LI Jun,ZHANG Yong-hui(College of Material Sci.and Eng.,Xihua University,Chengdu 610039,China);Effect of Gas-assisted Injection Processing Parameters on Gas Penetrating Power[J];China Plastics Industry;2005-05
7 MAO Hua-jie,Yuan Le-jian,SHI Hong,HUA Lin (Wuhan University of Science and Engineering,Wuhan 430070,China);Application of Orthogonal Test in Gas-aid Injection Moulding[J];China Plastics Industry;2006-01
8 Wei Changwu(Anhui university of architecture,Hefei 230022,Anhui China);The parameters optimization of air assisted injection molding process[J];China Rubber/Plastics Technology and Equipment;2008-12
【Citations】
Chinese Journal Full-text Database 6 Hits
1 Wang Dongyan, Liang Ruifeng (State Engineering Research Center of Engineering Plastics,Institute of Chemistry, Chinese Academy of Sciences, Beijing 100080);APPLICATION OF GAS-ASSISTED INJECTION MOLDING TECHNOLOGY[J];Engineering Plastics Application;1999-01
2 Shen Changyu, Chen Jingbo, Liu Chuntai, Li Qian (APPT NERC, Zhengzhou University of Technology, 450002);GAS-ASSISTED INJECTION MOLDING TECHNOLOGY[J];Engineering Plastics Application;1999-09
3 Dong Xiangrfiong, Li Nianwei, Shen Honglei (Sichuan University, Chengdu 610065);CAE ANALYSIS OF THE INJECTION MOLD CASTING SYSTEM FOR THE AOTUO CAR BUMPER[J];Engineering Plastics Application;1999-12
4 Liang Jicai, Fu Peiju, Sun Zhibin, Li Xiaoming, Li Yi(Roll-forging Technology Research Institute, Jilin University, Changchun, 130025);Study on key technology of gas assisted injection molding[J];China Synthetic Resin and Plastics;2001-02
5 Dong Xiangzhang (Dept of Plastics Eng, Sichuan Union University);The Design of Super-large-scale Injection Mold[J];China Plastics Industry;1995-03
6 LI Wei, LI Rong xun, YANG Zhi ming, FENG Shao hua, LIU Guang ye (Plastics Research Institute, Qingdao Institute of Chemical Technology, Shandong Qingdao 266042, China);Application of CAE in Design of Runner Systems for Automobile Bumpers[J];China Plastics;2001-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Zhang Xiaoyun, Wang Hui (The Magazine House of EPA,Jinan 250031);ADVANCE IN THE PROCESSING TECHNOLOGY OF THE ENGINEERING PLASTICS OF CHINA IN 1995[J];Engineering Plastics Application;1996-04
2 Dong Xiangzhong Kong Xing(Sichuan Union University,Chengdu 610065) (Qingdao Haier Research Institute of General Freezer Company 266034);DESIGN OF LARGE INJECTION MOLD FOR AUDI CAR HEAD-BUMPER[J];Engineering Plastics Application;1997-06
3 Qu Xiaozhong, Wang Dongyan, Liang Ruifeng (State Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Science, Beijing 100080);COMPUTER SIMULATIONS ON EFFECT OF RHEOLOGICAL PROPERTIES OF POLYPROPYLENE ON GAS-ASSISTED INJECTION MOLDING[J];Engineering Plastics Application;1999-06
4 Dong Xiangrfiong, Li Nianwei, Shen Honglei (Sichuan University, Chengdu 610065);CAE ANALYSIS OF THE INJECTION MOLD CASTING SYSTEM FOR THE AOTUO CAR BUMPER[J];Engineering Plastics Application;1999-12
5 Li Kun(Guangzhou Guangdian Lamko Mould Manufacturing Co., Ltd. 510730)Yu Tongmin (Mould & Die Institute, Dalian University of Technology 116024);DESIGN OF GAS-ASSISTED INJECTION MOULD AND ITS SELECTION OF GAS PINS[J];Engineering Plastics Application;2001-06
6 Dai Fang, Yan Hengmei, Sun Anyuan ( The Magazine House of EPA, Jinan 250031);ADVANCE IN THE ENGINEERING THERMOPLASTICS OF CHINA IN 2001[J];Engineering Plastics Application;2002-04
7 Cai Yonghong, Cao Xianwu, Zhou Nanqiao (National Engineering Research Center of Novel Equipment for Polymer Processing of South China University of Technology,Guangzhou 510640,China);INFLUENCE OF PROCESSING PARAMETERS AND RIB DESIGN ON THE GAS-ASSISTED INJECTION MOLDING[J];Engineering Plastics Application;2002-09
8 Zhang Deqiang (Sichuan Changhong Electric Group Co. , Mianyang 621000, China);APPLICATION OF THE GAS-ASSISTED INJECTION MOLDING IN TV STRUCTURE DESIGN[J];Engineering Plastics Application;2003-07
9 Zhang Huimin, Zhou Guilian, Jiao Dongmei (Qingdao University of Science and Technology, Qingdao 266042, China);INFLUENCE OF PROCESSING PARAMETERS AND GAS CHANNEL STRUCTURE ON MECHANICAL PROPERTIES OF GAS-ASSISTED INJECTION MOLDING PARTS[J];Engineering Plastics Application;2004-06
10 Huang Xian,Dong Xiangzhong(College of Polymer Science and Engineering,Sichuan University,Chengdu 610065,China)Mo Jianhua (State Key Laboratory of Die and Mold Technology,Huazhong University of Science and Technology,Wuhan 430074,China);VIRTUAL DESIGN OF INJECTION MOLD FOR AUTOMOTIVE FRAMEWORK[J];Engineering Plastics Application;2006-02
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Shen Kaizhi Guan Qing Ji Jiliang Chen Xuan (Department of Plastie Engineering Sichuan Union University);SELF-REINFORCEMENT OF ABS BY OSCILLATING PACKING INJECTION MOULDING UNDER LOW PRESSURE[J];Engineering Plastics Application;1995-01
2 Zhai Wen Zhang Xi(Institute 53, Jinan 250031) (Foreign Language Department of Shandong University of Technology, Jinan 250014)Yang Huanchao (Jining Chemical & Skilled Worker School 272141);REACTION INJECTION MOLDING AND ITS PRODUCT PROPERTY & APPLICATION[J];Engineering Plastics Application;1998-11
3 Wang Dongyan, Liang Ruifeng (State Engineering Research Center of Engineering Plastics,Institute of Chemistry, Chinese Academy of Sciences, Beijing 100080);APPLICATION OF GAS-ASSISTED INJECTION MOLDING TECHNOLOGY[J];Engineering Plastics Application;1999-01
4 Chen Xu, Shen Changyu, Wang lixia, Chen Jingbo, Liu Chuntai, Wang Guozhong (Zhengzhou University of Technology 450002);CAE TECHNOLOGY FOR CAVITY FILLING DURING GAS-ASSISTED INJECTION MOLDING[J];Engineering Plastics Application;1999-02
5 Wang Dongyan, Qu Xiaozhong, Liang Ruifeng (State Engineering Research Center of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100080);APPLICATION OF GAS-ASSISTED INJECTION MOLDING TECHNOLOGY IN COLOUR TV CABINET[J];Engineering Plastics Application;1999-02
6 Shen Changyu, Chen Jingbo, Liu Chuntai, Li Qian (APPT NERC, Zhengzhou Univereity of Technology 450002);MAIN EQUIPMENTS IN INJECTION MOLDING[J];Engineering Plastics Application;1999-06
7 Shen Changyu, Li Haimei (APFT NERC, Zhengzhou University 450002);TECHNICAL SURVEY AND DEVELOPING TREND IN COMPUTER AIDED ENGINEERING FOR PLASTICS PROCESSING MOULD[J];Engineering Plastics Application;2001-02
8 Chen Jingbo, Shen Changyu, Li Qian, Liu Chuntai (Zhengzhou University, APPT NERC 450002);DEVELOPMENT OF PLASTICS INJECTION MOLDING TECHNOLOGY[J];Engineering Plastics Application;2002-02
9 Yan Litang, Sheng Jing (College of Material Science and Engineering, Tianjin University, Tianjing 300072, China);APPLICATION OF THE GAS-ASSISTED CAE TECHNOLOGY EN THE FRONT PANELMOLD OF THE COLOR TV[J];Engineering Plastics Application;2002-12
10 Zhou Kunlu, Liu Jianzhu ( Huafeng Enterprise Group Co. Ltd. , Mianyang 621000, China);STUDY ON IMPROVEMENT OF DIMENSIONAL PRECISION OF PLASTIC PRODUCT[J];Engineering Plastics Application;2003-01
【Secondary References】
Chinese Journal Full-text Database 8 Hits
1 Zhang Jinbiao,Zhang Xiqin(Changzhou Institute of Mechatronic Technology,Changzhou 213164,China);RESEARCH ON PROCESS PARAMETERS OPTIMIZATION OF GAS-ASSISTED INJECTION MOLDING BASED ON ORTHOGONAL TEST METHOD[J];Engineering Plastics Application;2009-03
2 Xiong Aihua,Liu Hesheng,Huang Xingyuan,Lai Jiamei,Xu Lei (Polymer Processing Research Lab,College of Mechanical and Electronic Engineering,Nanchang University,Nanchang 330031,China);DEVELOPMENT AND INVESTIGATION OF WATER-ASSISTED INJECTION[J];Engineering Plastics Application;2009-10
3 DENG Xin1,2,WANG Jin2,YANG Jun2,LI Duxin1 (1State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,Hunan,China;2Zhuzhou Times New Material Technology Co. Ltd.,Zhuzhou 412007,Hunan,China);Development of reaction injection molding nylon 6[J];Chemical Industry and Engineering Progress;2009-08
4 Deng Xin 1,2,Wang Jin 2,Yang Jun 2,Li Duxin 1 1.State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China 2.Zhuzhou Times New Material Technology Co.,Ltd.,Zhuzhou 412007,China;Flow Analysis of Reaction Injection Molding Nylon 6 Based on MOLDFLOW[J];Plastics Science and Technology;2009-12
5 HUANG Yao,QIU Ya-li,WANG Lei-gang,DONG Jiao(School of Materials Science and Engineering,Jiangsu University,Zhenjiang 212013,China);Optimization of Process Parameters of GAIM Based on Taguchi[J];China Plastics Industry;2010-08
6 Wei Changwu (Anhui construction industry college, Hefei 230022, Anhui, China);Effect of gas penetration on the design of gas passage of gas assistant molding[J];China Rubber/Plastics Technology and Equipment;2007-12
7 Wei Changwu(Anhui university of architecture,Hefei 230022,Anhui China);The parameters optimization of air assisted injection molding process[J];China Rubber/Plastics Technology and Equipment;2008-12
8 Wei Changwu(Anhui architectural industry college,Hefei 230022,Anhui China);Application of Moldflow software in the gas-assisted injection molding[J];China Rubber/Plastics Technology and Equipment;2010-02
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Dong Xiangzhong Kong Xing(Sichuan Union University,Chengdu 610065) (Qingdao Haier Research Institute of General Freezer Company 266034);DESIGN OF LARGE INJECTION MOLD FOR AUDI CAR HEAD-BUMPER[J];Engineering Plastics Application;1997-06
2 Ma Yulu; Mao Xiaodong and He Manjun(East China University of Science & Technology,Shanghai);AN INNOVATIVE POLYMER MOCBEING METHOD──GAS-ASSISTED INJECTION MOLDING[J];POLYMERIC MATERIALS SCIENCE & CNGINEERING;1994-06
3 Liang Ruifeng(National Engineering Research Center of Engineering Plastics,Institute of Chemistry, Chinese Academy of Sciences,Beijing 100080);Gas - Assisted Injection Molding──A New Technology with Innovation and Challenge[J];;1996-04
4 Sun Zhibin, Fu Peifu, Liang Jicai, Li Xiaoming(Roll - forging Technology Research Institute, Jinlin University of Technology, Changchun, 130025);Gas Assisted Injection Molding Technology[J];China Synthetic Resin and Plastics;2000-02
5 Dong Xiangzhang (Dept of Plastics Eng, Sichuan Union University);The Design of Super-large-scale Injection Mold[J];China Plastics Industry;1995-03
6 Dong Xiangzhong Lin Xudong Dong Jie (Dept of Plastics Eng,Sichuan Union University);Injection Mold Design and Melt Dynamic Filling CAE Analysis for Front Bumper of TOYOTA Car[J];CHINA PLASTICS INDUSTRY;1997-05
7 Wang lixia Chen Jingbo Liu Chuntai Shen Changyu (National Engineering Research Center of Rubber and Plastics Mold,Zhengzhou University of Technology);Numerical Simulation of Gas assisted Injection Molding Process[J];CHINA PLASTICS INDUSTRY;1998-05
8 LI Xin,WU Chong\|feng(Tianjin Institute of Light Industry,Tianjin,300222,China);Computer Aided Design of Feed System of Plastic Injection Mold[J];PLASTICS SCIENCE AND TECHNOLOGY;2000-01
9 Luo Yi\ Xiao Qinsha(Research Institute of Yueyang General Petrochemical Works, 414014);Present Situations and Prospect of China Modified Polypropylene Specific Material Used for Automobile[J];PLASTICS SCIENCE AND TECHNOLOGY;1998-05
10 $$$$Chi Junhui and Xu Yuanze(State Key Laboratory of Engineering Plastics,Institute of Chemistry,Academia Sinica,100081);Gas Assisted Injection Molding[J];PLASTICS;1995-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved