Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Plastics Application》 2003-04
Add to Favorite Get Latest Update

STUDY AND APPLICATION OF THERMAL EXPANSION MOLDING OF COMPOSITE

Jin Wugang (The 39th Electronics Institute of MII, Xi'an 710065, China)  
The principle and molding process of the thermal expansion technology of the composite are briefly introduced. The material property, design and manufacture of the thermal expansion core mold are tested, the influencing factors on the expansion pressure are analyzed and the technology is compared with the autoclave molding process. The core mold made of thermal expansion silicon rubber is used with steel mold to mold CF composite products with good result. The research showed that this technology was suitable for the global co-curing molding of the multi-cavity composite products.
【CateGory Index】: TQ320
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 7 Hits
1 Tan Guichun, Zhang Xiaoyun, Liu Hongchao (The Magazine House of EPA, Jinan 250031, China);ADVANCE IN THE PROCESSING TECHNOLOGY OF THE ENGINEERING PLASTICS OF CHINA IN 2003[J];Engineering Plastics Application;2004-06
2 YIN Changping, LIU Jun, ZENG Jingcheng, XIAO Jiayu (College of Aerospace and Material Engineering, National University of Defense Technology, Changsha 410073);Application of Silicone Rubber in Polymer Based Composites Molding[J];Materials Review;2006-11
3 LIU Jun,PENG Chao-yi,DU Gang,ZENG Jing-cheng,XIAO Jia-yu(College of Aerospace and Material Engineering,National University of Defense Technology,Changsha 410073,China);Fabricating Carbon/Epoxy Primary-load Bearing Cylinders by Thermal Expansion Mould Method[J];Journal of Materials Engineering;2007-09
4 Xiao Jiayu Zeng Jingcheng Jiang Dazhi(College of Aerospace and Materials Engineering,NUDT,Changsha,410073);Composite Structures for Aerospace Industry and its Fabrication with Rubber Assisted Resin Transfer Molding[J];Spacecraft Recovery & Remote Sensing;2007-02
5 YIN Chang-ping,LIU Jun,LIU Zhuo-feng,ZHANG Ming-long,ZENG Jing-cheng(College of Aerospace and Material Engineering,National University Defense Technology,Changsha,410073);Study on the Thermal Expansion Properties of Flexible Mold Material for RTM Process[J];Fiber Composites;2006-01
6 YIN Chang-ping,LIU Jun,LIU Zhuo-feng,DAI Xiao-qing,ZENG Jing-cheng(College of Aerospace and Material Engineering,National University of Defense Technology,Changsha,410073);Study on the Process Properties of Flexible Mold Material for RTM[J];Fiber Composites;2006-02
7 QIAO Dong,HU Hong (College of Textile,Donghua University,Shanghai 200051,China);Progress in Molding Technology for Polymer Composite[J];China Plastics Industry;2008-S1
【Citations】
Chinese Journal Full-text Database 1 Hits
1 ;New Process of Composite Molding-Thermal Expansion Molding[J];AEROSPACE MATERIALS & TECHNOLOGY;1996-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 YIN Changping, LIU Jun, ZENG Jingcheng, XIAO Jiayu (College of Aerospace and Material Engineering, National University of Defense Technology, Changsha 410073);Application of Silicone Rubber in Polymer Based Composites Molding[J];Materials Review;2006-11
2 ZENG Jing-cheng,YIN Chang-ping,LIU Jun(College of Aerospace and Material Engineering,NationalUniversity of Defense Technology,Changsha 410073,China);Fabrication of the Cabin Component by Flexible-mould Assisted RTM Process and Its Performance[J];Journal of Materials Engineering;2006-06
3 LIU Jun,PENG Chao-yi,DU Gang,ZENG Jing-cheng,XIAO Jia-yu(College of Aerospace and Material Engineering,National University of Defense Technology,Changsha 410073,China);Fabricating Carbon/Epoxy Primary-load Bearing Cylinders by Thermal Expansion Mould Method[J];Journal of Materials Engineering;2007-09
4 Xiao Jiayu Zeng Jingcheng Jiang Dazhi(College of Aerospace and Materials Engineering,NUDT,Changsha,410073);Composite Structures for Aerospace Industry and its Fabrication with Rubber Assisted Resin Transfer Molding[J];Spacecraft Recovery & Remote Sensing;2007-02
5 YIN Chang-ping,LIU Jun,LIU Zhuo-feng,ZHANG Ming-long,ZENG Jing-cheng(College of Aerospace and Material Engineering,National University Defense Technology,Changsha,410073);Study on the Thermal Expansion Properties of Flexible Mold Material for RTM Process[J];Fiber Composites;2006-01
6 YIN Chang-ping,LIU Jun,LIU Zhuo-feng,DAI Xiao-qing,ZENG Jing-cheng(College of Aerospace and Material Engineering,National University of Defense Technology,Changsha,410073);Study on the Process Properties of Flexible Mold Material for RTM[J];Fiber Composites;2006-02
7 WANG Ruonan1,WU Xiaoqing1,LOU Xiaojie2(1.Key Laboratory for Advanced Textile Composites of Ministry of Education,Tianjin Polytechnic University,Tianjin 300160)(2.Harbin FRP Institute,Herbin 150036,China);Application of Silicon Rubber Inflatable Bag in RTM Technology[J];Fiber Composites;2007-04
8 QIAO Dong,HU Hong (College of Textile,Donghua University,Shanghai 200051,China);Progress in Molding Technology for Polymer Composite[J];China Plastics Industry;2008-S1
9 JIN Wu\|gang(The 39th Electronics Institute of MII,Xian 710065,China);Application of Thermal Expansion Silicone Rubber to Moulding Process of Composites[J];Plastics Science and Technology;2003-02
10 Jin Wugang Gao Jianjun Wu Liying (The 39 th Electronics Institute of MII, Xian );APPLICATION OF THERMAL EXPANSION TECHNOLOGY IN MOLDING OF CFRP[J];Modern Plastics Processing and Applications;2003-01
China Proceedings of conference Full-text Database 1 Hits
1 Jin Wugang (The 39th Electronics Institute of MII, xi'an 710065, China);STUDY AND APPELLATION OF THERMAL EXPANSION MOLDING OF COMPOSITE[A];[C];2002
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Zhou Kunlu, Liu Jianzhu ( Huafeng Enterprise Group Co. Ltd. , Mianyang 621000, China);STUDY ON IMPROVEMENT OF DIMENSIONAL PRECISION OF PLASTIC PRODUCT[J];Engineering Plastics Application;2003-01
2 Ma Yiqing (Shanxi Research Institute of Textile Accessories, Xianyang 712000, China);APPLICATION OF MULTI-STAGE INJECTION MOULDING IN THE PRODUCTION OF PVC-U PIPING[J];Engineering Plastics Application;2003-01
3 Sang Zhiquan, Zhang Hongjun, Zheng Jun ( Oil - Field Construction Section of Jiangsu Oil Field, Yangzhou 225261, China);DEVELOPMENT OF THE EXTRUDER DIE FOR THROUGH INTERNAL-DIAMETER-DETERMINED PLASTICS PIPES[J];Engineering Plastics Application;2003-01
4 Yang Daijun, Huo Lixing, Zhang Yufeng (College of Material Science and Engineering, Tianjin University, Tianjin 300072, China);PREPARATION AND DEVELOPMENT OF BUTT FUSION WELDING MACHINE FOR PRESSURIZED PLASTIC PIPES[J];Engineering Plastics Application;2003-01
5 Zhu Wenli, Zhou Nanqiao, Peng Xiangfang (The Key Laboratory of Polymer Processing Engineering, Ministry of Education, South China University of Technology, Guangzhou 510640, China);TECHNOLOGY OF CONTINUOUS EXTRUSION FOR SUPERCRITICAL CO_2/PVC MICROCELLULAR PLASTICS[J];Engineering Plastics Application;2003-02
6 Shen Honglei Dong Xiangzhong (Changzhou Institute of Technology, Changzhou 213002, China) ( Sichuan University, Chengdu 610065, China);THE INFLUENCE OF PROCESSING PARAMETERS ON THE RESULT OF GAS-AIDED INJECTION MOLDING[J];Engineering Plastics Application;2003-02
7 Liao Yongxia, Dong Xiangzhong (Institute of Polymer Materials Science and Engineering, Sichuan University, Chengdu 610065, China);DESIGN OF INJECTION MOLD FOR SANTANA CAR BUCKLE LOCK[J];Engineering Plastics Application;2003-02
8 Wei Wenyi (Beijing Futian Building Material Co. Ltd. , Beijing 101117, China);SITUATION AND DEVELOPMENT FOR THE FEEDING SYSTEM OF CO-ROTATING PARALLEL TWIN-SCREW EXTRUDER[J];Engineering Plastics Application;2003-02
9 Wang Wensheng (North China Institute of Technology, Taiyuan 030051, China);MULTIPOLE INJECTION MOLDING PROCESSING OF MODIFIED POLYPROPYLENE BUMPER[J];Engineering Plastics Application;2003-03
10 Wei Yantang, Wang Youyin (Dongying Shenbon Plastics Co. Ltd. , Dongying 257067, China) Xu Bin (Shandong Shenbon Plastics Pipe System Group Co. Ltd. , Jinan 250011 , China);CONNECTING METHOD AND TECHNOLOGY OF POLYETHYLENE PIPE[J];Engineering Plastics Application;2003-03
China Proceedings of conference Full-text Database 1 Hits
1 Yan Hongbin Sun Hongwei Ling Ying Li Ruijie Jiang Yuanxing (Aerospace Research Institute of Materials & Processing Technology, Beijing, 100076);STUDIES ON STITCHING/RTM TECHNOLOGY OF CARBON/EPOXY COMPOSITE MATERIALS[A];[C];2002
【Secondary References】
Chinese Journal Full-text Database 6 Hits
1 Li Tao, Jiang Lixiang, Feng Weiquan, Liu Xiangpeng ( Beijing Institute of Spacecraft Environment Engineering, Beijing 100094, China );The effects of space atomic oxygen erosion on epoxy and silicone adhesives in LEO spacecraft[J];Spacecraft Environment Engineering;2009-03
2 XU Mao-kai,ZHANG Shu-ping(Harbin FRP Institute,Harbin 150036);Study on the Fractured Profiles and Microscopic Failure Mechanism of Silicone Rubber[J];Fiber Composites;2007-02
3 WANG Ruonan1,WU Xiaoqing1,LOU Xiaojie2(1.Key Laboratory for Advanced Textile Composites of Ministry of Education,Tianjin Polytechnic University,Tianjin 300160)(2.Harbin FRP Institute,Herbin 150036,China);Application of Silicon Rubber Inflatable Bag in RTM Technology[J];Fiber Composites;2007-04
4 YE Hongjun,ZHAI Quansheng,PENG Zhixia,CHEN Jiwei,YANG Yufei(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Co-curing Technology Using Water Dispersible Core for the Hollow-Structure Composite Parts[J];Fiber Composites;2009-04
5 Zhong Xiaochun1 Wan Jing2 Xiao Jun1 (1 College of Material Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016) (2 Technological Insitute,Nanjing Chenguang Group Co.,LTD,Nanjing 210006);Thermal Expansion Technology of Rubber Insulation[J];Aerospace Materials & Technology;2009-03
6 CHEN Xiangbao,ZHANG Baoyan,XING Liying(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Application and Development of Advanced Polymer Matrix Composites[J];Materials China;2009-06
China Proceedings of conference Full-text Database 4 Hits
1 REN Ming-fa,HUANG Qi-zhong,CHEN Hao-ran,LI Tong(State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology, Dalian 116023,Liaoning,China);Numerical Simulation of Soft-mold Aided Process of Viscoelastic Composite Grids Structure[A];[C];2008
2 HUANG Qi-zhong,REN Ming-fa,CHEN Hao-ran,ZHANG Zhong-wei(State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology, Dalian 116023,Liaoning,China);Parameters Match Analysis of the Soft-die Forming Process of Composite Grids Structure[A];[C];2008
3 Huang Qizhong,Ren Mingfa,Chen Haoran (State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology,Dalian 116024);The Parameters Match Analysis of Pressure During Soft-Die Forming TechniCal Process[A];[C];2008
4 Jiang Lizheng1 Zhang Miao2 (1. Nanjing Research Institute of Electronics Technology, Nanjing 210013, China; 2. College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 312300, China);Study on Numerical Simulation and Mold Design of Antenna Frame Carbon Fiber Component for RTM Processing[A];[C];2009
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved