Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Plastics Application》 2006-02
Add to Favorite Get Latest Update

RESEARCH ON WARPAGE OF NYLON PART PREPARED BY SELECTIVE LASER SINTERING

Yu Qian,Bai Peikang(Department of Material and Engineering,North University of China,Taiyuan 030051,China)  
The influences of different sintering parameters such as laser power,thickness of a single layer,preheating temperature on the warpage in selective laser sintering nylon materials were sudied with plenty of experiments.The warpage degree was characterized by means of warpage height and difference between chord length and true length,and the variational curve which exhibited the relationship of warpage degree along with technical parameters was described according to experimental datum.The mutative tendency of warpage degree along with the parameters was summarized.
【CateGory Index】: TQ320.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 Tan Guichun, Zhao Zhihong, Zhang Xiaoyun (The Magazine House of EPA, Jinan 250031, China);ADVANCE IN PROCESSING TECHNOLOGY OF ENGINEERING PLASTICS OF CHINA IN 2006[J];Engineering Plastics Application;2007-06
2 ZHANG Jian,Xin Ji-zhong,ZHENG Hai-zhong,XU Zhi-feng,GAO Yan-feng(Nanchang Hangkong University,Nanchang,Jiangxi 330063,China);The Influence of Energy Density on the Properties of Nylon Product Produced by Selective Laser Sintering[J];Plastics;2008-03
3 ZHANG Jian1,2,TAO Lei1,XU Zhifeng1,ZHENG Haizhong1,XIN Jizhong1 (1.Nanchang Hangkong University,Nanchang 330063,China;2.East China Jiaotong University,Nanchang 330016,China);Study on the Warping Distortion of Selective Laser Sintering Workpiece with Nylon6 Mixed Copper Composite Powder[J];New Technology & New Process;2010-05
【Citations】
Chinese Journal Full-text Database 2 Hits
1 BAI Pei kang, ZHU Lin quan, CHENG Jun, ZHAO Xi hua (Dept. of Material Science and Engineer, North China Institute of Technology, Taiyuan 030051, China);Study on the Laser Sintering Performance of Organic Composities[J];JOURNAL OF NORTH CHINA INSTITUTE OF TECHNOLOGY;1999-01
2 Wu Chuanbao Liu Chengmei Shi Yusheng Li Busong Master; Dept. of Chemistry, Huazhong Univ. of Sci. & Tech., Wuhan 430074, China.;Investigation on warp and curl in selective laser sintering polymeric materials[J];Journal of Huazhong University of Science and Technology;2002-08
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Yu Qian, Bai Peikang, Wang Jianhong (Department of Material and Engineering, North University of China, Taiyuan 030051, China);TECHNICAL PROGRESS ON LASER SINTERING RAPID PROTOTYPING WITH NYLON POWDER COMPOSITES[J];Engineering Plastics Application;2005-05
2 Chen Aiwu(Engineering Technology Research Center of Shanxi Province for Opto-Electronic Information and Instrument,North University of China,Taiyuan 030051,China);RESEARCH ON MECHANISM OF SELECTIVE LASER SINTERING OF PA/Cu POWDER[J];Engineering Plastics Application;2008-06
3 ZHAO Jing~ 1) , MA Wenjiang~ 2) , CAO Wenbin~ 1) , LI Yanhong~ 1) , LI Jiangtao~ 3) , GE Changchun~ 1) 1) Laboratory of Special Ceramics and Powder Metallurgy, University of Science and Technology Beijing, Beijing 100083, China 2) Applied Science School, University of Science and Technology Beijing, Beijing 100083, China 3) Department of Engineering Research Center for Microsphere Materials, Technical Institute of Physics and Chemistry, Chinese Academic of Sciences, Beijing 100101, China;Selective laser sintering of coated Si_3N_4 ceramic powders[J];Journal of University of Science and Technology Beijing;2006-11
4 LIU Chang sheng, ZHOU Li, CHEN Sui yuan, CUI Hong wen (School of Materials & Metallurgy, Northeastern University, Shenyang 110004, China. Correspondent: LIU Chang sheng, professor, E mail: csliu?@?mail.neu.edu.cn);Development of the Laser Additive Processing Technology[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2003-08
5 YAN Chun-ze,SHI Yu-sheng,YANG Jing-song,LIU Jin-hui(State Key Laboratory of Material Processing and Die & Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China);"Bonus Z" in the Selective Laser Sintering of Polymeric Materials[J];Polymer Materials Science & Engineering;2009-05
6 Guo Hongfei Hao Xin He Zhihui et al;Research on Manufacture Technique of Transition Flange Based on Selective Laser Sintering Technology[J];Tool Engineering;2007-11
7 CUI Yi-juan,BAI Pei-kang,WANG Jian-hong,LIU Bin (School of Materials Science and Engineering,North University of China,Taiyuan 030051,China);Study on Preparation and Forming Properties of Composite-nylon Powder Used in Selective Laser Sintering[J];Bulletin of the Chinese Ceramic Society;2008-01
8 XIE Xiao-lin,WANG Yun-ying,MENG Jiang-yan,FAN Hong-qing,LI Zhi-peng(Dept.of Materials Science and Engineering,Nanchang Institute of Aeronautical Technology,Nanchang 330034,China);Study on Mechanism of Polystyrene Powder in Selective Laser Sintering[J];Journal of Aeronautical Materials;2006-01
9 Yan Chunze Shi Yusheng Yang Jingsun Huang Shuhuai(State Key Laboratory of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China);Secondary sintering of selective laser sintering polymeric materials[J];Journal of Huazhong University of Science and Technology(Nature Science Edition);2008-05
10 DONG Xing-tao1,ZHOU Zi-yu1,LU De-lin2,HONG Liang-liang1,RUAN Yao-bo1(1.The MOE Key Laboratory of Mechanical Manufacture and Automation,Zhejiang University of Technology,Hangzhou 310014,China;2.Zhejiang Information Institute of Machinery Industry,Hangzhou 310009,China);Study of temperature compensation based on preheating temperature field for SLS[J];Journal of Mechanical & Electrical Engineering;2010-05
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Sun Haixiao, Zen Fandi, Un Liulan, Huang Shuhuai (Rapid Prototyping and Manufacturing Center, Huazhong University of Science and Technology, Wuhan 430074);SELECTIVE LASER SINTERING TECHNOLOGY AND THE INFLUENCE OF POLYMERS USED ON THE TECHNOLOGY[J];Engineering Plastics Application;2001-03
2 Zhang Jianbin, Zhang Quanfu, Xu Chunyan, Xu Wei (Shandong Dongchen Engineering Plastics Co. Ltd. , Jinan 250220, China);TECHNOLOGICAL RESEARCH OF NYLON 1212 POWDER WITH SOLVENT METHOD[J];Engineering Plastics Application;2004-01
3 Zheng Liyun 1,2 , Zhao Lixin 1 , Niu Lanqin 1 (1.Mechanical Department, Hebei Institute of Engineering, Handan 056038, China; 2.State Key Laboratory of Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China);STUDY ON MECHANICAL PROPERTY OF MC NYLON/NANO-Al_2O_3 COMPOSITE[J];Engineering Plastics Application;2004-08
4 Kang Junyuan, Yan Li Li Yonghong (Guangdong Industry Technical College, Guangzhou 510300, China) (Jingwei Branch, Foshan Plastics Group Co. Ltd., Foshan 528000, China);APPLICATION OF CAE TECHNIQUE IN ANALYSIS OF WARPAGE DEFORMATION OF THIN-WALL PLASTIC PARTS[J];Engineering Plastics Application;2006-01
5 Shen Yihu, Yang Ning (Shanghai Jari Extrusion Technology Co. Ltd., Shanghai 201209, China);IMPROVEMENT DESIGN OF PVC-U PROFILE EXTRUSION DIE[J];Engineering Plastics Application;2006-01
6 Huang Xian,Dong Xiangzhong(College of Polymer Science and Engineering,Sichuan University,Chengdu 610065,China)Mo Jianhua (State Key Laboratory of Die and Mold Technology,Huazhong University of Science and Technology,Wuhan 430074,China);VIRTUAL DESIGN OF INJECTION MOLD FOR AUTOMOTIVE FRAMEWORK[J];Engineering Plastics Application;2006-02
7 Ma Dejun,Chen Jinnan,Peng Jiong,Wang Mingli(School of Chemical Engineering and Environment,Beijing Institute of Technology,Beijing 100081,China);SIMULATIONS OF 3-D ISOTHERMAL FLOW IN THE SCREW HEAD OF THE INJECTION MACHINE[J];Engineering Plastics Application;2006-03
8 Li Yongmei~(1,2),Lin Bin~(1),Li Yanjie~3(1.Mechanical Department,Tianjin University,Tianjin 300072,China; 2.Chengyang Branch,Qingdao Broadcast TV University,Qingdao 266109,China;3.Qingdao Haier Mould Co.Ltd.,Qingdao 266103,China);THE RESEARCH OF COOLING SYSTEM DESIGN IN PLASTIC INJECTION MOULD[J];Engineering Plastics Application;2006-04
9 Zhao Tingting(School of Mechanical Engineering,Shandong University of Technology, Zibo 255012,China)Jia Mingquan,Ding Shenyan(Shandong Kehui Electric Corporation,Zibo 255087,China);DRIVEN METHOD OF EXTRUDERS BY VARIABLE SPEED SWITCHED RELUCTANCE MOTOR DRIVE[J];Engineering Plastics Application;2006-04
10 Fang Qinghua,Kang Cunfeng,Ma Chunmin,Zhu Xiande,Wang Lili(Beijing University of Technology,Beijing 100022,China);THE CONTROL SYSTEM DESIGNS OF FULLY ELECTRIC INJECTION MOULDING MACHINE BASED ON SOFT PLC[J];Engineering Plastics Application;2006-04
【Secondary References】
Chinese Journal Full-text Database 6 Hits
1 CHEN Kun,ZHENG Ti-he,SONG Ke-dong,TIAN Xiang-ru,ZHANG Yu,DENG Ru-sheng(Zhuzhou Times New Material Technology Co.,Ltd.,Zhuzhou 412007,China);Application of BP Neural Network to POE-g-MAH/HDPE Toughening PA6[J];China Plastics Industry;2011-08
2 ZHANG Jian-mei1,YUN Jie-ping2(1.College of Mechanical and Electrical Engineering,Changzhou Institute of Technology,Changzhou,Jiangsu 213002,China;2.College of Yanling,Changzhou Instutyte of Technology,Changzhou,Jiangsu 213002,China);Optimization Designing Method about Processing Parameters of Plastic Powder on Selective Laser Sintering of Rapid Prototyping Manufacturing[J];Plastics;2009-04
3 WANG Cai-hong~1 ,HONG Sheng~2,QIAN Zhi-jun~2,HE Min~2,LU Sheng-jun~2,YU Jie~2(1. School of Chemistry and Chemical Engineering,Guizhou University,Guiyang,Guizhou 550025 ,China;2. National Engineering Research Center for Compounding and Modification of Polymeric Materials,Guiyang,Guizhou 550004,China);Application of Uniform Design in Preparation of Low Melting Point Polyamide 6[J];Plastics;2009-06
4 CHEN Kun,ZHENG Tihe,CAO Zhe(Zhuzhou Times New Materials Technology Co,Ltd,Zhuzhou 412007,China);Application of Homogeneous Design in the Investigation of POE/POE-g-MAH Toughened PA6[J];China Plastics;2010-09
5 CHEN Kun,ZHENG Tihe,SONG Kedong, TIAN Xiangru,ZHANG Yu (Zhuzhou Times New Material Technology Co,Ltd,Zhuzhou 412007,China);Application of BP Neural Network on PP/POE-g-MAH Toughening PA6[J];China Plastics;2011-12
6 Wu Cheng Luo Yun (School of physics and electronic information engineering of Hubei Engineering University, Sichuan Xiaogan 432000);Design of the Demonstration experiments of two-dimensional laser scanning system[J];Electronic Test;2013-05
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 LI Xiangsheng(Huazhong University of Science & Technology,Wuhan,China)HAN Min SHI Yusheng HUANG Shuhuai;Model of Shrinking and Curl Distortion for SLS Prototypes[J];China Mechanical Engineering;2001-08
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved