Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Plastics Application》 2008-08
Add to Favorite Get Latest Update

VARIABLE DENSITY TOPOLOGICAL OPTIMIZATION METHOD AND ITS APPLICATION RESEARCH IN THE REAR PLATEN'S STRUCTURE DESIGN

Li Jing (College of Mechanical Engineering, Guangxi University, Nanning 530004, China)  
Topological optimization theory was enunciated in this paper, and variable density topological optimization method was used to analyze the rear platen's structure of injection molding machine by ANSYS software. The optimal structure was found out and it had lower stress and strain than original. Topological optimization method gave the theory base to improve the platen's structure, and it was useful for solving practical problems.
【CateGory Index】: TQ320.5
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Cheng Gengdong;Zhang Dongxu(Research Institute of Engineering Mechanics,DUT);Topological optimization of plane elastic continuum with stress constraints[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;1995-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Xiong Mingyu (Beijing Futian Building Material Machinery Co. , Ltd. 101117);DEVELOPMENT AND RESEARCH OF CO-ROTATING PARALLEL TWIN-SCREW EXTRUDER[J];Engineering Plastics Application;2000-12
2 Guo Yichong(Beijing University of Chemical Technology, Beijing 100029, China) Ma Yulin(Shanghai Guoshi Curtain Wall Engineering Co. Ltd., Shanghai 200127, China);EXPLORATION ON GEOMETRY DESIGN FOR CO-ROTATING TWIN SCREW AND PRINCIPLES OF CLEARANCE AMENDMENT[J];Engineering Plastics Application;2005-04
3 Wei Wenyi Wang Baomin(Ollin Plant, Beiqi Foton Motor Co. Ltd., Zhucheng 262203, China) (Shandong Provincial Plastics R&D Center, Jinan 250002, China);STUDY ON CONCURRENT PARALLEL TWIN SCREW EXTRUDER USING IN THE FIELD OF FEEDSTUFF PROCESSING[J];Engineering Plastics Application;2008-11
4 YE Hong-ling, SUI Yun-kang (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100022, China);Topological Optimization of Continuum Structure With Stress Constraints Based on ICM Method[J];Journal of Beijing Polytechnic University;2005-S1
5 ZHANG Xue-sheng, SUI Yun-kang, LONG Lian-chun, YE Hong-ling (College of Mechanical Engineering and Applied Electronic Technology, Beijing University of Technology, Beijing 100022, China);The Stiffness Filter Function Based on Independent, Continuous, Mapping Method[J];Journal of Beijing University of Technology;2006-01
6 YE Hong-ling, SUI Yun-kang (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100022, China);Tbpological Optimization of Continuum Structure Under Stress Constraints[J];Journal of Beijing University of Technology;2006-04
7 YE Hong-ling, SUI Yun-kang, DU Jia-zheng, BIAN Bing-chuan (College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China);Optimal Topology Design of Truck Frame Structure With Stress Constraints[J];Journal of Beijing University of Technology;2006-S1
8 YE Hong-ling SUI Yun-kang LIU Zhao-miao (College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100022,China);Topological Optimization Analysis of Two-dimensional Continuum Thin Plate Structure[J];Journal of Beijing University of Technology;2007-08
9 YE Hong-ling SUI Yun-kang DU Jia-zheng (College of Mechanical Engineering and Applied Electronics Technology Beijing University of Technology,Beijing 100022,China);Topological Optimization Analysis of Continuum Structure With Displacement Constraints[J];Journal of Beijing University of Technology;2007-09
10 FENG Zhen-hua, FENG Lian-xun (School of Electric and Mechanical Engineering, Beijing Chemical Engineering University,Beijing 100029, China);BIVIS extruder and its research: a review[J];China Pulp & Paper Industry;2005-08
China Proceedings of conference Full-text Database 4 Hits
1 SUI Yun-kang , YE Hong-ling, DU Jia-zheng (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100022, China);DEVELOPMENT OF STRUCTURAL TOPOLOGICAL OPTIMIZATION AND IMMINENCY OF ITS MODEL TRANSFORMATION INTOINDEPENDENT LEVEL[A];[C];2005
2 SUI Yun-kang, WANG Xi-wang, DU Jia-zheng (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100124, China);NONLINEAR EXIST-NULL COMBINED BODIES METHOD FOR FRAME TOPOLOGICAL OPTIMIZATION WITH DISPLACEMENTS CONSTRAINTS[A];[C];2013
3 TIE Jun;SUI Yun-kang;Gengdan Institute of Beijing University of Technology;College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology;;The ICM method of structure topology optimization based on the positive and reverse complete transformations[A];[C];2014
4 Wu Jian-hui;Hebei baichuan Architectural Design Co.Ltd;;Structural design optimization and process analysis[A];[C];2015
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Huang Buming (Qinchuan Henly Plastics Machinery Co., Ltd., Shunde 528300);REASON AND PREVENTION OF CRACK OF THE MOLD PLATE OF THE INJECTION MOULDING MACHINE[J];Engineering Plastics Application;2000-12
2 YE Hong-ling SUI Yun-kang LIU Zhao-miao (College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100022,China);Topological Optimization Analysis of Two-dimensional Continuum Thin Plate Structure[J];Journal of Beijing University of Technology;2007-08
3 Cheng Gengdong;Zhang Dongxu(Research Institute of Engineering Mechanics,DUT);Topological optimization of plane elastic continuum with stress constraints[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;1995-01
4 SUI Yun-kang , YE Hong-ling , DU Jia-zheng (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100022, China);DEVELOPMENT OF STRUCTURAL TOPOLOGICAL OPTIMIZATION AND IMMINENCY OF ITS MODEL TRANSFORMATION INTO INDEPENDENT LEVEL[J];Engineering Mechanics;2005-S1
5 SUI Yun-kang , YE Hong-ling , LIU Jian-xin , CHEN Shi , YU Hui-ping (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100124, China);A STRUCTURAL TOPOLOGICAL OPTIMIZATION METHOD BASED ON EXPLORING CONCEPTUAL ROOT[J];Engineering Mechanics;2008-S2
6 LI Fang\+1, LING Dao\|sheng\+2\;(1. College of Mechanical & Electrical Engineering, Zhejiang University of Technology, Hangzhou 310032, China; 2. Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China);Survey of the developing in engineering structural optimization design[J];Engineering Design;2002-05
7 Sui Yunkang 1 Yu Xin 2 Ye Baorui 1 ( 1 College of Mech Electr.Eng., Beijing Polytechnic University, Beijing, 100022) ( 2 Dept. of Mech.Eng., Anshan Institute of Iron and Steel Technology, Anshan, 114002);THE UNIFORM MODEL BASED ON THE EXIST-NULL COMBINATION FOR THE TRUSS AND MEMBRANE TOPOLOGICAL OPTIMIZATION WITH STRESS CONSTRAINT[J];Acta Mechanica Solida Sinica;2001-01
8 WU Zhong-bo,LI Shu(School of Aeronautic and Technology,Beijing University of Aeronautic and Astronautics,Beijing 100083,China);Topology Optimization in Static and Dynamic States Based on Optistruct[J];Aeronautical Computing Technique;2006-06
9 Liu Shutian~(*1),Jia Haipeng~1, Wang Delun~2nt and Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China;2. Department of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China);Topology optimization of thin-and-long structures[J];Chinese Journal of Computational Mechanics;2004-06
10 LUO Zhen~(1),CHNE Li-ping~(*1),HUANG Yu-ying~2,ZHANG Yun-qing~1(1.National Engineering Research Center for CAD,Huazhong University of Science and Technology,Wuhan 430074,China;2.School of Civil Engineering and Mechanics,Huazhong University of Science and Technology,Wuhan 430074,China);Topological optimization using RAMP interpolation scheme[J];Chinese Journal of Computational Mechanics;2005-05
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 Wu Shunyin Teng Jianxin;Plastic Packing Processing Machines and Foree Analysis of the Guide Columns Guangdong University of Technology[J];PACKAGING ENGINEERING;1999-03
2 Cheng Gengdong;Zhang Dongxu(Research Institute of Engineering Mechanics,DUT);Topological optimization of plane elastic continuum with stress constraints[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;1995-01
3 Wang Yuefang;Sun Huanchun(Dept.of Engineering Mechanics,DUT);On layout optimization of truss structures with discrete sizing variables[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;1995-04
4 ;Applicatin of ANSYS Program in Stiffness and Strength Analysis of a Trailer Chassis[J];ELECTRO-MECHANICAL ENGINEERING;1999-04
5 Tan Zhongfu;Hu Chenjie;On the Singular Optimum in the Topology Optimization[J];JOURNAL OF HARBIN UNIVERSITY OF CIVIL ENGINEERING AND ARCHITECTURE;1996-01
6 Wang Weirong Li Xiaoyan Ke Zunzhong (Hefei University of Technology);3D FINITE ELEMENT ANALYSIS FOR LOCKING MECHANISM OF DIE CASTING MACHINE[J];JOURNAL OF HEFEI UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE);1999-01
7 Gu Yuanxian Cheng Gengdong(Dalian University of Technology);Microcomputer-based System MCADS Integrated with FEM, Optimization and CAD[J];;1990-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved