Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Plastics Application》 2009-01
Add to Favorite Get Latest Update

THE APPLCATON OF MOLDFLOW SOFTWARE N NJECTON MOLD DESGN OF CORDLESS PHONE PANEL

Wu Shengjin,Liu Bin(National Engineering Research Center of Novel Equipment for Polymer Processing,South China University of Technology,Guangzhou 510640,China)  
The effect of the gate number and location,packing pressure and time on the filling cavity pressure,distribution of welding lines,warpage distortion quantity and shrinkage of the plastics part were analyzed by means of moldflow software when designing the mold of cordless phone panel.The injection defect and plastics part distortion were reduced by optimizing the gate number and location,packing pressure and time.There was practice meaning for setting up the injection moulding processing parameters and mold design.The results analyzed by Moldflow were similar to the solution in practice,it was proved that the analyzing result of Moldflow in the optimum design of plastic mold was reliable.
【CateGory Index】: TQ320.66
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 9 Hits
1 Wu Xiao;Xue Chun'e;Yin Hao;Department of Mechanical Engineering and Automation, Wuhan Textile University;College of Engineering,Changjiang Institute of Technology;;Design of Injection Mould for Car Seat Back[J];Engineering Plastics Application;2014-10
2 Lin Quan;School of Mechanical and Electrical Engineering,Wuyi University;;Injection Mold Design of Double Threaded Connector with Both Taper Thread and Segmented Thread[J];Engineering Plastics Application;2015-04
3 Wu Xiao;Xue Chun'e;Department of Mechanical Engineering and Automation, Wuhan Textile University;Engineering College, Changjiang Institute of Technology;;Design of Injection Mould for Mouse Shell[J];Engineering Plastics Application;2015-08
4 WANG Qiang1,LIU Ying2 (1.Department of Mechatronic,Suzhou Institute of Trade & Commerce,Suzhou,Jiangsu 215031,China;2.School of Mechanical and Electrical Engineering,Nanchang University,Nanchang,Jiangxi 330029,China);Study on the molding process of mobile phone shell based on Moldflow[J];Die & Mould Industry;2010-09
5 ZHANG Qi,WANG Qiang;Aplication of Moldflow in injection mold design of mobile phone cover[J];Die and Mould Technology;2011-04
6 ;针对模具设计中的问题及解决方案进行分析[J];Technological Pioneers;2013-06
7 CHEN Ru-xiang1,2,PENG Xiang-fang1,LIU Bin1,GONG Xiao-san2(1.National Engineering Research Center of Novel Equipment for Polymer Processing,The Key Laboratory of Polymer ProcessingEngineering of Ministry of Education,South China University of Technology,Guangzhou,Guangdong 510640,China;2.School of Materials Science and Engineering,Hunan University,Changsha,Hunan 410082,China);Numerical Simulation of Shrinkage of Plastic Balancing Weights[J];Plastics;2010-03
8 Zhao Xiujun 1,Wang Pengcheng 2,Zhou Maojun 1,Wang Mingwei 1,Li Shu 1 1 School of Mechanical Engineering and Automation,Dalian Polytechnic University,Dalian 116034,China 2 School of Materials Science and Engineering,Inner Mongolia University of Technology,Hohhot 010051,China;Optimization Design for Multi-cavity Plastic Mold and Analysis for Molding Problem[J];Plastics Science and Technology;2013-03
9 XU Xiaochang;GAO Dongqiang;Department of Materials Engineering,Shaanxi Polytechnic Institute;Shaanxi University of Science and Technology;;Application of CAD/CAE Technology in the Injection Mold Design of Telephones Panel[J];New Technology & New Process;2014-07
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Kang Junyuan, Yan Li Li Yonghong (Guangdong Industry Technical College, Guangzhou 510300, China) (Jingwei Branch, Foshan Plastics Group Co. Ltd., Foshan 528000, China);APPLICATION OF CAE TECHNIQUE IN ANALYSIS OF WARPAGE DEFORMATION OF THIN-WALL PLASTIC PARTS[J];Engineering Plastics Application;2006-01
2 ZENG Xia-wen , TAN Yan-xian (Hunan Vocational College of Industry , Changsha 410208, China);Application of CAE in Quality Analysis for Plastic Molding[J];Equipment Manufacturing Technology;2007-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Ma Keming, Liu Hong (Department of Material Engineering, Shenyang Institute of Aeronautical Engineering, Shenyang 110034, China);FLOW SIMULATION ANALYSIS OF INJECTION MOLDING FOR PA6/GF COMPOSITES[J];Engineering Plastics Application;2005-11
2 Zuo Daping 1,2, Zhang Yihua 1 , Rui Yulong 1(1.Nanjng University of Aeronautics and Astronautics, Nanjing 210016, China;2. Zhangjiajie Engineering Vocational and Technical College, Zhangjiajie 420017, China);STUDY ON WARPAGE OF PA66/GF PART[J];Engineering Plastics Application;2005-12
3 Chen Jiping,Ding Zhiping(School of Mechanical Engineering,Hunan University of Technology,Zhuzhou 412008,China);COMPUTER AIDED DESIGN OF INJECTION MOULD OF AIR-CONDITION PANEL[J];Engineering Plastics Application;2006-05
4 Zheng Xiaopei,Lu Shufen,Wang Lixia,Shen Changyu(NERC for Appt,Zhengzhou University,Zhengzhou 450002,China);EFFECT OF PROCESSING PARAMETERS ON SINK MARKS OF INJECTION-MOLDED PARTS AND PROCESS OPTIMIZATION[J];Engineering Plastics Application;2006-07
5 Yu Fufang, Lin Yongnan, Xie Linjun (Department of Electromechanical and Automation Engineering,Fujian University of Technology,Fuzhou 350014, China);DESIGN OF INJECTION MOLD FOR GFRPA66 CRUST OF ENGINE REVOLUTION SPEED TRANSDUCER[J];Engineering Plastics Application;2006-09
6 Zhou Huangwei, Yan Zheng (Colledge of Polymer Science and Engineering, Sichuan University, Chengdu 610065, China);ANALYSIS ON CRACKING BREAKAGE OF COMPLEX SHELLY PRODUCT BY CAE[J];Engineering Plastics Application;2006-11
7 Yu Fufang, Xie Yunlong, Liu Qiong (Department of Electromechanical and Automation Engineering, Fujian University of Technology, Fuzhou 350014, China);DESIGN OF INJECTION MOULD FOR CIGARETTE-LIGHTER COVER[J];Engineering Plastics Application;2006-11
8 Yang Zhiqiang(College of Communications,Zhejiang Normal University, Jinhua 321019, China)Wang Jingbo(Shandong Broadcast & TV Newspaper, Jinan 250011, China);THE INFLUENCE OF INJECTION PROCESSING PARAMETER ON THE WARP VARIATION OF THE INJECTION MOULDED PARTS[J];Engineering Plastics Application;2007-02
9 Chen Jiping, Ding Zhiping(School of Mechanical Engineering, Hunan University of Technology, Zhuzhou 412008, China);OPTIMAL DESIGN FOR POURING SYSTEM OF INJECTION MOULD FOR BIG PLASTICS PART[J];Engineering Plastics Application;2007-03
10 Tan Guichun, Zhao Zhihong, Zhang Xiaoyun (The Magazine House of EPA, Jinan 250031, China);ADVANCE IN PROCESSING TECHNOLOGY OF ENGINEERING PLASTICS OF CHINA IN 2006[J];Engineering Plastics Application;2007-06
China Proceedings of conference Full-text Database 3 Hits
1 ;塑料名片格的注塑模具设计[A];[C];2006
2 TONG Yu DING Dan WEN Peng-fei ZHAI Peng-cheng (School of Sic. , WUT, Wuhan 430070, China);Simulation of Aspheric Plastic Optical Lens Injection Molding Process and Cavity Designing[A];[C];2006
3 LIU Huan,CUI Li,WANG Ya-li,GUO Zhi-zhong (Electromechanical project academy of Hainan University, Hainan danzhou 571737);The injection mold flowing analysis study of the back shell of magnetic treat instrument based on CAE[A];[C];2008
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Shen Changyu, Chen Jingbo, Liu Chuntai, Li Qian (APPT NERC, Zhengzhou Univeraity of Technology 450002);COMPUTER SIMULATION TECHNOLOGY OF THE PLASTICS PROCESSING[J];Engineering Plastics Application;2000-04
2 Li Hongsheng,Guo Zhiying,Li Dequn(Department of Plasticity Technology,Shanghai Jiao Tong University,Shanghai 200030,China);EVALUATION CRITERIA OF CAE ANALYTICAL RESULTS OF INJECTION MOLDING[J];Engineering Plastics Application;2005-08
3 Zheng Xiaopei,Lu Shufen,Wang Lixia,Shen Changyu(NERC for Appt,Zhengzhou University,Zhengzhou 450002,China);EFFECT OF PROCESSING PARAMETERS ON SINK MARKS OF INJECTION-MOLDED PARTS AND PROCESS OPTIMIZATION[J];Engineering Plastics Application;2006-07
4 Yang Zhiqiang(College of Communications,Zhejiang Normal University, Jinhua 321019, China)Wang Jingbo(Shandong Broadcast & TV Newspaper, Jinan 250011, China);THE INFLUENCE OF INJECTION PROCESSING PARAMETER ON THE WARP VARIATION OF THE INJECTION MOULDED PARTS[J];Engineering Plastics Application;2007-02
5 Liu Rongliang,Liu Bin(National Engineering Research Center of Novel Equipment for Polymer Processing,South China University of Technology,Guangzhou 510640,China);OPTIMIZING DESIGN OF INJECTION MOULD OF MOBILE PHONE BACK SHELL BASED ON MOLDFLOW[J];Engineering Plastics Application;2007-10
6 He Huabo(Faculty of Engineering,Ningbo University,Ningbo 315211,China);DESIGN OPTIMIZATION OF TURNING LID MOLDING PROCESSING PARAMETERS BASED ON THE ORTHOGONAL EXPERIMENTS[J];Engineering Plastics Application;2009-04
7 Chen Yan,Cai Weiliang,Cai Yilan(College of Engineering,South China Agricultural University,Guangzhou 510642,China);OPTIMIZATION OF MULTI-INDEX INJECTION PARAMETERS BASED ON CAE AND ORTHOGONAL TEST[J];Engineering Plastics Application;2010-04
8 Huang Song,Wang Xishun(School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China);PARAMETER OPTIMIZATION OF INJECTION MOLDING PROCESSING BASED ON CAE AND DOE TECHNOLOGY[J];Engineering Plastics Application;2010-07
9 Song Caifu1,Zhang Peng2,Tan Jianzhi1(1.China Liansu Group Holdings Co.Ltd.,Foshan 528318,China;2.Institute of Materials Science and Energy,Guangdong University of Technology,Guangzhou 510090,China);OPTIMUM DESIGN OF INJECTION MOLDING PROCESS OF THE PE PIPE[J];Engineering Plastics Application;2011-05
10 He Huabo,Deng Yimin,Li Honglin(Ningbo University,Ningbo 315211,China);Structure Design Optimization of Plastics Pen Pot Based on Moldflow[J];Electromachining & Mould;2007-04
【Secondary References】
Chinese Journal Full-text Database 8 Hits
1 SHEN Jian,WANG Chuan-yang,QIAN Qiu-bo(School of Mechanical and Electric Engineering,Soochow University,Suzhou,Jiangsu 215021,China);Moldflow-based flow analysis on injection molding for charger base[J];Die & Mould Industry;2011-04
2 LU Jian-jun1,ZHAO Wei1,YUAN Guo-ding2(1.Changzhou Institute of Mechatronic Technology,Changzhou,Jiangsu 213164,China; 2.Jiangsu University,Zhenjiang,Jiangsu 212013,China);CAE-based optimal design of runner system of injection mould for automobile panel[J];Die & Mould Industry;2011-09
3 WANG Hua-jun,XU De-xin,LI Ai-nong,ZHANG Wen-jie(School of Materials Science and Engineering,Wuhan University of Technology,Wuhan,Hubei 430070,China);Application of Moldflow in curriculum teaching of injection molding[J];Die & Mould Industry;2012-06
4 ;Design of Injection Mold for the Compact Part Basedon UG NX 7.0 and MoldFlow Software[J];Die & Mould Manufacture;2011-06
5 TANG Xiao-dong;Design of injection mould for more-grid box based on Moldflow analysis[J];Die and Mould Technology;2012-04
6 YU Bei1,WANG He-qing2;Research on defects of Mold ow injection molding products based on warp[J];Manufacturing Automation;2013-11
7 ZHAO Jian-ping,CAI Long-yu,WANG Li;CAE technology application in the oscilloscope shell injection mould design[J];Die and Mould Technology;2013-04
8 CHEN Yukang;ZHANG Lixin;GAO Guangdi;WEI Min;WU Jinlin;WANG Sheng;College of Mechanical and Electrical Engineering,Shihezi University;;Modeling for Cam Plate of Horizontal Spindle-Type Cotton-Picker and Analysis of Casting Process[J];Journal of Shihezi University(Natural Science);2013-06
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 SHEN Chang yu (1) , ZHAI Ming (1,2) , CHEN Jing bo (1) , LIU Chun tai (1) , WANG Li xia (1) ( (1) NERC for Mold & Die, Zhengzhou University of Technology, Zhengzhou 450002, China; (2) Engineering Mechanics Depar;NUMERICAL SIMULATION OF THE PACKING STAGE IN INJECTION MOLDING[J];POLYMERIC MATERIALS SCIENCE & CNGINEERING;2000-01
2 DONG Jin-hu,DONG Bin-bin,ZHANG Xiang,LI Qian,SHEN Chang-yu (Zhengzhou University,Zhengzhou,Henan450002,China);The Analysis of the Warpage of the Thin-Wall Plastic Parts and the Optimization of the Technological Parameters[J];Die & Mould Industry;2004-09
3 XIA Wei,PANG Zu-gao,ZHOU Lin (Guangxi University,Nanning,Guangxi530004,China);Simulation of Injection Moluding of the Precision Soldering-Wire Tray Parts[J];Die & Mould Industry;2005-03
4 LI Haimei(Zhengzhou University,Zhengzhou,China) GU Yuanxian SHEN Changyu;Warpage Analysis and Numerical Prediction of Molding Dimensions for Injection Molded Parts[J];China Mechanical Engineering;2002-10
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved