Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Plastics Application》 2009-11
Add to Favorite Get Latest Update


Cao Liang[Wuhan Branch of Magnasteyr Automotive Technology(Shanghai) Co.Ltd.,Wuhan 430056,China]  
The overall taches of developing sedan plastic rear bumper skirt were studied.CATIA was adopted to improve the product and mould structure and the injection molding parameters were optimized.The improvent effect was simulated by Moldflow software.The effective and economical approach to solve the shrinkage deformation was found.
【CateGory Index】: TQ320.662
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 5 Hits
1 Tan Guichun, Zhao Zhihong, Xu Shudao (The Magazine House of EPA, Jinan 250031, China);ADVANCE IN PROCESSING TECHNOLOGY OF ENGINEERING PLASTICS OF CHINA IN 2009[J];Engineering Plastics Application;2010-06
2 WANG Heng-bing,PAN Yan,SHI Wen,LI You-bing(College of Materials Science and Engineering,Chongqing University of Technology,Chongqing 400054,China);Moldflow-Based Analysis of Glass Fiber Orientation for Automobile Bumper[J];Journal of Chongqing University of Technology(Natural Science);2012-03
3 YIN Hong-ling,SUN Mao,LI Bing;CAE-based optimization design of gate location for cover plate[J];Die and Mould Technology;2010-04
4 YIN Hong-ling,YAN Bo,HUANG Jin-shen,et al;Application of CAE technique to prevent injection machine clamp force shortage[J];Die and Mould Technology;2011-02
5 YIN Hong-ling;;CAE-based optimization of injection process for car front plate[J];Die and Mould Technology;2015-02
Chinese Journal Full-text Database 2 Hits
1 Li Wanxing (The West Shansi Machine Plant);THE WARPAGE OF INJECTION-MOLDING PRODUCTS AND THE AVOIDING MEASURES[J];Engineering Plastics Application;1989-01
2 Zhou Kunlu (Huafeng Radio Components Manufactory);STUDY ON THE WARPAGE OF INJECTION MOLDED STRIP PARTS[J];Engineering Plastics Application;1992-03
Chinese Journal Full-text Database 10 Hits
1 Wang Qi,Zhang Weihuang Xu Qiyi,Lu Yong,Zhang Xiaomin(East China University of Science and Technology .Shanghai 200237) (Shanghai Jinxing Television Works 200233);MANAGEMENT OF THE MOTORCYCLE PANEL WITH AGM[J];Engineering Plastics Application;1996-05
2 Ju Jinshan (The 38th Research Institute of MEI.Hefei 230031);THE WARP AGE OF DMC MOULDED PANEL AND ITS CONTROL[J];Engineering Plastics Application;1998-05
3 Yang Qi, Zeng Banglu (Department of Plastics Engineering, Sichuan Union University, Chengdu 610065);STUDY ON THE DYNAMICALLY SULFURATED PP/EPDM BLEND[J];Engineering Plastics Application;1998-07
4 Feng Wei, Luo Xin, Yang Jincai, Zhang Liqun, Jin Riguang (College of Materials Science & Engineering, Beijing University of Chemical Technology 100029)Yang Hongyi, Li An (Shenyang Line-materials Factory 110000);RHEOLOGICAL BEHAVIOR OF CaSO_4 WHISKER/PP/EPDM COMPOSITES[J];Engineering Plastics Application;1998-07
5 Li Haidong, Cheng Fengmei, Wang Yuming, Ren Xiouyan (College of Chemical Engineering, Changchun University of Technology, Changchun 130012, China);FUNCTIONALLIZATION OF PP AND STUDY ON NYLON 66/PP COMPATIBILITY[J];Engineering Plastics Application;2003-03
6 Yang Fei, Yuan Xiaoli, Zhao Rui, Zhang Fenglong (Harbin Electric Cable Works, Harbin 150086, China);APPLICATION OF FLAMD-RESISTANT ORGANOSILANE CROSS-LINKED PE IN CABLE[J];Engineering Plastics Application;2003-05
7 Guo Yichong, Yan Baorui, Xin Chunling, Li Qingchun(Beijing University of Chemical Technology, Beijing 100029, China);EXPERIMENT ON STRETCHING PROCESS OF PLASTICS GEOGRID[J];Engineering Plastics Application;2004-08
8 Ji Haiyan, Zhou Yahong,Yang Xujie, Lu Lude, Wang Xin (1. College of Material, Jiangsu University, Zhenjinang 212013, China; 2. Materials Chemistry Laboratory, Nanjing University of Science and Technology, Nanjing 210094, China);SYNTHESIS AND CHARACTERIZATION OF PEMA WITH NARROW MOLECULAR WEIGHT DISTRIBUTION[J];Engineering Plastics Application;2004-09
9 Liu Bo, Chen Limin (College of Polymer Science and Engineering, Sichuan University, Chengdu610065, China);THE OPTIMAL DESIGN OF THERMAL PLASTICS INJECTION MOLDING PARAMETER[J];Engineering Plastics Application;2005-05
10 Li Xiaolan, Wang Jiufen, Huang Fusheng (Department of Chemical Engineering, North University of China, Taiyuan 030051, China);SYNTHESIS OF THERMOTROPIC LIQUID CRYSTAL COPOLYESTER OF PBT-PHB[J];Engineering Plastics Application;2005-11
China Proceedings of conference Full-text Database 8 Hits
1 ZHANG Shan-shan WANG Jun CAI Hao-peng(School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China);INTERFACIAL STUDY OF UV MODIFIED KEVLAR FIBER REINFORCED EPOXY MATRIX COMPOSITES[A];[C];2008
2 Zhang Meng,Zhou Yonghong,Hu Lihong (1.Research Institute of Forest Products Chemistry under Chinese Academy of Forestry;2.Jiangsu Qianglin Bioenergy Co.,Ltd.);Study on Preparation and Heat Stability of Rosin-based Rigid Polyurethane Foam[A];[C];2010
3 WANG Yuansheng, YANG Xue, YU Hongwei (Department of Chemistry and Materials, Naval University of Engineering, Wuhan 430033, China);Study on Sound Reduction Properties of Water-soluble Polymers[A];[C];2006
4 Sun Tianju, Lai Yong, Lin Ye The State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu, 610065, China;The High Efficient Formaldehyde Absorbent for Polyoxymethylene[A];[C];2006
5 Li Yongfeng, Liu Yixing, Li Jian (Key Laboratory of Bio-based Material Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, Hei Longjiang, China);Polymer Reinforced Wood-based Composite Prepared by In-situ Polymerization with Functional Monomers[A];[C];2009
7 Dai Wenli,Xuc Liang.Wang Pengju (Plastics Engineering Department,Chengdu University of Science and technololy,Chengdu);THE MORPHOLOGY AND PROPERTIES OF INJECTION-MOLDED NYLON 1010[A];[C];2001
8 Li Deliang;Guo Yan;Wang Baozhu;Qingdao Aier + new materials Co.Ltd.;;APPLICATION OF A NEW TYPE OF DAMPING COATING IN SHIP VIBRATION AND NOISE REDUCTION OF[A];[C];2014
Chinese Journal Full-text Database 10 Hits
1 Wang Songjie, Zheng Guoqiang, Shen Changyu (NERC of Plastics & Rubber Mold, College of Technology, Zhengzhou University, Zhengzhou 450002, China);SETTING OF THE PRESSURE PARAMETERS FOR THE INJECTION MACHINE[J];Engineering Plastics Application;2004-01
2 Ma Keming, Liu Hong (Department of Material Engineering, Shenyang Institute of Aeronautical Engineering, Shenyang 110034, China);FLOW SIMULATION ANALYSIS OF INJECTION MOLDING FOR PA6/GF COMPOSITES[J];Engineering Plastics Application;2005-11
3 He Zhihui,Ma Wanzhen(College of Materials Science and Engineering,Inner Mongolia University of Technology,Hohhot 010051,China);THE NFLUENCNG FACTORS RESEARCH OF DE SWELL RATO OF HDPE/OMMT NANO COMPOSTE[J];Engineering Plastics Application;2009-01
4 Wu Dan1,Fang Liming1,2,3,Cao Xianwu3,Zhao Yaoming1(1.School of Materials Science and Engineering,South China University of Technology,Guangzhou 510640,China;2.Key Laboratory for High Performance and Functional Polymer Materials of Guangdong Province,South China University of Technology,Guangzhou 510640,China;3.Key Laboratory of the Ministry of Education for Polymer Processing,South China University of Technology,Guangzhou 510640,China);STUDY ON METASTABILITY PHENOMENON IN PROCESSING OF ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENE[J];Engineering Plastics Application;2009-02
5 Cui Jianfang,Bai Peikang,Wang Jianhong(School of Material Science and Engineering,North University of China,Taiyuan 030051,China);RESEARCH ON PERFORMANCE OF ENHANCEMENT POST-PROCESSED PLASTIC POWDER SINTERING PIECES[J];Engineering Plastics Application;2009-02
6 Zhao Longzhi,Zhao Mingjuan,Li Na (School of Mechanical and Electrical Engineering,East China Jiaotong University,Nanchang 330013,China)Zhang Shangbing,Song Jinliang(Liaoyang Jinxing Automobile Inner Decoration Group Co.Ltd.,Liaoyang 111000,China);APPLICATION OF CAD/CAE IN DESIGN OF INJECTION MOULD FOR SAFETY BELT PROTECTION COVER SUPPORT[J];Engineering Plastics Application;2009-02
7 Sun Kaiyan,Li Jun(CNGC Institute 53,Jinan 250031,China);STUDY ON DRILLING OF ARAMID FIBER COMPOSITES[J];Engineering Plastics Application;2009-03
8 Li Xizhang(Hunan Urban Construction College,Xiangtan 411103,China);DESIGN INJECTION MOULD WITH QUADRATIC EJECTING MECHANISM OF SLIDER AND WEDGE DUAL PUSH PLATE[J];Engineering Plastics Application;2009-03
9 Huang Guijian1,Wu Xiaoyu2,Liang Xiong1,Li Jibin2,Wu Haitang3 (1.College of Mechatronics and Control Engineering,Shenzhen University,Shenzhen 518060,China; 2.Shenzhen Key Laboratory of Advanced Mould Manufacturing Technology,Shenzhen University,Shenzhen 518060,China; 3.Dongguan Konka Mould Plastic Co. Ltd.,Dongguan 523685,China);DESIGN OF INJECTION MOULD WITH MECHANISM SET INSIDE CORE-PULLING SLIDE PREVENTING PLASTIC PARTS FROM ADHERING TO MOULD[J];Engineering Plastics Application;2009-05
10 Sun Ke(Nanjing College of Information Technology,Nanjing 210046,China);A MOLDING TECHNOLOGY FOR PLASTIC OPTICAL ASPHERICAL LENS[J];Engineering Plastics Application;2009-06
【Secondary References】
Chinese Journal Full-text Database 4 Hits
1 ZHANG Hui-min,NIE Yong,LI Xu;Application of numerical simulation technology to optimize injection holding pressure[J];Die and Mould Technology;2011-04
2 TANG Xiao-dong;Design of injection mould for more-grid box based on Moldflow analysis[J];Die and Mould Technology;2012-04
3 ZENG Xin-qiao,LI Ting-yu(Qinghai Oilfeild Gas Turbine Power Corporation,Qinghai 816000,China);Thin Plastic Shell Injection Mold Design Based on Moldflow Analysis[J];Journal of Jiaying University;2013-05
4 JIANG Fan;FENG Jun-ming;OU Jia-jie;XIAO Zhong-min;College of Mechanical and Electrical Engineering,Guangzhou University;;Analysis on clamp force of die-casting die in vibration working condition[J];Die & Mould Industry;2014-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved