Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Plastics Application》 2012-02
Add to Favorite Get Latest Update

Analysis and Optimization of Warpage on Injection Molding of Inverse Model of Face

Yan Qingguang,Sun Cunyou,Fan Jin(School of Materials Science and Engineering,Jilin University,Changchun 130022,China)  
A human face was studied and reverse engineering was used to make the measured three-dimensional face point cloud data to NURBS surface models against hope for success.Finite element method was used on human face to simulate the injection molding process simulation.The relevant process parameters affected the warping were optimized by using the orthogonal optimization method to get an optimal combination of the technological parameters.Simulation results revealed that it could obtain a nice face restoration by using the method,and effectively solved the preparation problem of human soft tissue restoration.
【Fund】: 吉林省人才资助项目(20102048)
【CateGory Index】: TQ320.662
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 2 Hits
1 Lü Zhaosheng,Zhao Zhihong,Tan Guichun,Wang Hongru(CNGC Institute 53,Jinan 250031,China);Advance in Processing Technology of Engineering Plastics of China in 2012[J];Engineering Plastics Application;2013-05
2 WANG Hong-song, WAN Man-hua, PENG Fu-guan (School of Mechanical Engineering, Jiujiang Vocational and Technical College, Jiujiang 332007, China);Rapid Forming of Artificial Bone based on RE/RP/RT Technology[J];Journal of Netshape Forming Engineering;2013-02
Chinese Journal Full-text Database 8 Hits
1 LI Hongli,XING Yuan( Plastic Forming Engineering Dept. Shanghai Jiaotong University,Shanghai 200030,China);Curve Surface Reconstruction Methods and Comparison Based on Points Data[J];China Metal Forming Equipment & Manufacturing Technology;2006-06
2 LIU Wen-lin (Collage of City Construction, Wuhan University of Science and Technology, Wuhan 430070, China) HE Pei-ying (Zhengzhou Institute of Light Industry, Zhengzhou 450002, China);A Survey of Curved Surface Reconstruction Technique from 3-D Scattered Data[J];Journal of Engineering Graphics;2003-02
3 Sun Yuwen Wu Hongji Liu Jian (Dalian University of Technology);RESEARCH ON THE METHOD OF ACCURATE NURBS SURFACE FITTING TO SCATTERED POINTS[J];Chinese Journal of Mechanical Engineering;2004-03
4 LUO Zhi-gao,WANG Hai-han(School of Mechanical Engineering,Jiangsu University,Zhenjiang,Jiangsu212013,China);Effect of injection technological parameters on warpage of plastic thin wall part[J];Die & Mould Industry;2006-09
5 SUN Yan-xia, BAO Xu-dong, JIANG Chun-tao (Department of Biological Science and Medical Engineering, Southeast University, Nanjing 210096 China);Finite Element Model in Modeling of Soft Tissue[J];Journal of Biomedical Engineering Research;2004-03
6 Fu D,Jin AM Department of Orthopaedics,Zhujiang Hospital,Southern Medical University,Guangzhou 510280,Guangdong Province,China;Reconstructing a finite element model of human skeletona using CT images[J];Journal of Clinical Rehabilitative Tissue Engineering Research;2007-09
7 KE Ying-lin~1, SHAN Dong-ri~2 (1. College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China;2. College of Mechanical and Electrical Engineering, Shandong Institute of Light Industry, Jinan 250100, China);Edge-based segmentation of point cloud data[J];Journal of Zhejiang University(Engineering Science);2005-03
8 WANG Junjie(Shanghai Jiaotong University,Shanghai,China)YAN JunqiMA DengzheJIN Ye;The Study of Reconstruction of Free-form Surface for Engine Inlet[J];China Mechanical Engineering;2001-07
Chinese Journal Full-text Database 10 Hits
1 Zhao Guo,Xin Yong(Institute of Mechanical and Electronic Engineering,Nanchang University,Nanchang 330031,China);OPTIMIZATION OF PARAMETERS IN INJECTION MOLDING BASED ON MULTI-TARGET COMPREHENSIVE EVALUATION[J];Engineering Plastics Application;2008-01
2 Y. Liu S. Li X. Sun State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, 116024 Dalian, China X. Sun ENT Department, The Second Affiliated Hospital of Dalian Medical University, 116025 Dalian, China;Numerical analysis of ossicular chain lesion of human ear[J];力学学报(英文版);2009-02
3 LI Cheng-gui~1 WANG Min~2 (1.School of Instrument Scienee and Opto-electronies Engineering,Beihang University,Beijing 100083,China; 2.Advanced Manufacturing Technology-The Key Laboratory of Beijing Municipality,Beijing University of Technology,Beijing 100022,China);Conformal Interpolating Algorithm Based on Cubic NURBS in Curve Ultra-precision Machining[J];Journal of Beijing University of Technology;2008-02
4 Tian Qing,Wang Yanmin,Zhang Ruiju(School of Gematics and Urban Information,BUCEA Beijing 100044);Segmentation for Point Cloud on the Grid-Based Clustering of Curvature[J];Journal of Beijing University of Civil Engineering and Architecture;2008-04
5 ZHENG Hong-hai1,MENG Chun-ling1,YANG Sheng1,WANG Peng2 (1.College of Mechanical Engineering,Beijing Technology and Business University,Beijing 100048,China;2.Neurosurgery of Chinese People's Liberation Army General Hospital,Beijing 100853,China);RESEARCH ON MODELING OF OCCIPITOATLANTOAXIAL FINITE ELEMENT MODEL[J];Journal of Beijing Technology and Business University(Natural Science Edition);2010-01
6 YAN Qing-guang,SUN Cun-you,FAN Jin(College of Materials Science and Engineering,Jilin University,Changchun 130022,China,);CAE and optimization of injection molding for human nose inverse model[J];Materials Science and Technology;2012-02
7 Yang Yanan,Yu Huping (Shanghai JiaoTong University,Shanghai 200030,China);Orthogonal Experiment on Injection Warpage of Mobile Phone Shell[J];Electromachining & Mould;2010-03
8 YU Jin-long1, HUANG Zong-hai1, FU Dong1 Department of General Surgery1, Department of Orthopedics2, Zhujiang Hospital, Southern Medical University, Guangzhou 510282, China;Reconstruction of a digital three-dimensional model of the rectum and the surrounding structures based on CT angiographic data[J];Journal of Southern Medical University;2008-08
9 FU Dong1,2,JIN An-min1,TIAN Jing1,SONG Zhi-hui3,YU BO1,ZHONG Shi-zhen4 1Department of Orthopedics,Zhujiang Hospital,Southern Medical University,Guangzhou 510282,China;28691 Hospital of the Armed Police Force,Huzhou 313003,China;3Department of Orthopedics,Kanghua Hospital,Dongguan 523000,China;4Institute of Clinical Anatomy,Southern Medical University,Guangzhou 510515,China;Three-dimensional visualization of the structures related to the anterior cervical segment approach[J];Journal of Southern Medical University;2010-04
10 YU Jin-long1,HUANG Zong-hai1,CUI Chun-hui1,HUANG Shu-xin2,ZOU Zhao-wei11Department of General Surgery,2Department of Ophthalmonogy,Zhujiang Hospital,Southern Medical University,Guangzhou 510282,Chin;Clinical application of 64-slice computed tomographic angiography-based virtual colonoscopy in the diagnosis of colonic tumors[J];Journal of Southern Medical University;2011-09
China Proceedings of conference Full-text Database 2 Hits
1 WANG Xiaoping1, HUANG Zhiqin2, YANG Lin2, CUI Fuzhai1 (1.Department of Materials Science and Engineering, Tsinghua University, Beijing 100084; 2. Shanghai Gaitech Scientific Instruments Co. Ltd., Shanghai, 200030);Establishment of 3-D Model and Finite Element Analysis of Porous Biomaterials[A];[C];2008
2 Li Dapeng is with the Institute of scientific & technical information of liaoning province,China,.Xu Jia is with the Shenyang Machine Tool CO.,LTD Zhongjie Drilling & Boring Machine Factory,Shenyang,China,.Liu Yang is with the Institute of Brilliance Automobile Engineering Research,New Energy Sources Engineering Section,Shenyang,China,Wang Fuli is with the School of Information Science and Engineering,Northeastern University,Shenyang,China,;A Two-Stage Approach for Optimizing the Robust Injection Molding Parameters[A];[C];2011
Chinese Journal Full-text Database 10 Hits
1 Zhao Miao1,Huang Xiang2,Xin Yong1(1.School of Mechanical and Electrical Engineering,Nanchang University,Nanchang 330031,China; 2.Fuzhou Vocational and Technical College,Fuzhou 3440001,China);Research of High-gloss Injection Molding Technology in Thin Shell Plastic Parts with Holes[J];Engineering Plastics Application;2012-01
2 Fan Youfa,Xiao Xueqing(Department of Materials Science and Engineering,Fujian University of Technology,Fuzhou 350108,China);Design of Bi-color Injection Mold for Control Switch Facepanel Plastic[J];Engineering Plastics Application;2012-01
3 Sun Zhengchang1,Li Peijie1,Dong Tianshu2,Feng Zhiyuan2(1.Tsinghua University New Material International Cooperate R&D Center,Beijing 100084,China; 2.Shenzhen Leadwell Technology Co.,L.K.Group,.Shenzhen 518109,China);Designs of Soft-PLC and Fieldbus Type Control System for All-electronic Injection Molding Machine[J];Engineering Plastics Application;2012-01
4 Li Guofeng1,Liao Mu2(1.School of Electrical and Mechanical Engineering,Changsha University,Changsha 410003,China; 2.Tian You Nonstandard Equipment Co.,Ltd.,Changsha 410118,China);Failure Analysis and Resolving Measures for the Head of Polyurethane High-pressure Injecting Gun[J];Engineering Plastics Application;2012-02
5 Wang Zuming,Yu Huping,Yin Hongling,Xia Songying(National Die & Mould CAD Engineering Research Center,Shanghai Jiao Tong University,Shanghai 200030,China);Experiment and Numerical Simulation Research for Defect in Injection Molding Based on External Induction Heating Device[J];Engineering Plastics Application;2012-03
6 Zhao Qilin,Xu Kang,Chen Li,Chen Haosen(Engineering Institute of Engineer Corps,PLA University of Science and Technology,Nanjing 210007,China);Study on Pultrusion Technology for Hybrid Fiber Reinforced Composites Based on DSC[J];Engineering Plastics Application;2012-03
7 Gong Shuyun1,Fang Cheng1,Ma Yulu1,Xie Linsheng1,Li Jianli1,2,Wu Zhangqi1,Xia Ping1,Si Xiang1,Liu Hu1(1.School of Mechanical and Power Engineering,East China University of Science and Technology,Shanghai 200237,China;2.Department of Chemical Machinery,Beijing Institute of Petrochemical Technology,Beijing 102617,China);Study on Similarity Scale-Up Model for Mixing Section of Two-Rotor Continuous Mixer Based on Equivalent Energy[J];Engineering Plastics Application;2012-03
8 Wei Junwei,Cheng Tianjian,Guo Wantao(Luoyang Ship Material Research Institute,Luoyang 471023,China);Study of Foam Sandwich Structural Composites VARI Process Simulation[J];Engineering Plastics Application;2012-04
9 Li Wenjin(Hunan Urban Construction College,Xiangtan 411101,China);Design of the Wing-Cover Injection Mold[J];Engineering Plastics Application;2012-05
10 KANG Zhong-zhi1,WANG Xiang2,SONG Shi-wei1,OU Yao-hui1(1.SANY Heavy Industry Co.,Ltd.,Changsha 410100,China; 2.School of Material Science and Engineering,Wuhan University of Technology,Wuhan 430070,China);DISCUSSION ON THE TECHNOLOGY OF SOFT MOLD/VACUUM ASSISTED RESIN INFUSION PROCESS THE DISK WITH COMPLEX HOLES[J];Fiber Reinforced Plastics/Composites;2012-03
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Zou Hao ,Tuy Heang K., Liu Jiren (Embedded System Research Center Neusoft Corporation Shenyang 110006);Surface shading of three-dimensional medical objects[J];Computerized Tomography Theory and Applications;2000-S1
2 CHENG Li Ming 1* ,JIA Lian Shun 2,HUANG Ben Cai 3,ZHU Chuan Hai 3,ZHENG Ben Hui 3,MEI Jiong 1,YU Guang Rong 1,CAI Xuan Song 1 (1. Department of Orthopaedics,Tongji Hospital,Tongji University,Shanghai 200065,China; 2. Department of Orthopaedics,Changzheng Hospital, Second Military Medical University,Shanghai 200003; 3. Department of Engeneering, Tongji University);Three-dimensional finite elements model of lower cervical vertebrae[J];Academic Journal of Second Military Medical University;2003-03
3 ;Three-dimensional finite element model of the whole cervical spine[J];Academic Journal of Second Military Medical University;2006-05
4 ZHANG Mei-chao~1, LIAO Jin-min~1, LI Min~2, ZHAO Wei-dong~1 ~1Department of Biomedical Engineering, First Military Medical University, Guangzhou 510515, China; ~2Department of Stomatology, People's Hospital of Nanchang District, Wuxi 214021, China;Reconstruction of the mandibular model using a three-dimensional laser scanner[J];Journal of First Military Medical University;2004-07
5 Song Dejun Zhu Xinxiong Department of Manufacturing Engineering Beijing University of Aeronautics and Astronautics;NSIDE SURFACE MODELING BASED ON ENERGY OPTIMIZATION[J];JOURNAL OF ENGINEERING GRAPHICS;1998-01
6 Ye Dong et al;Calibration Algorithm of Joint Zero position Deviations for 6 DOF Joint type CMM[J];TOOL ENGINEERING;1999-04
7 ZOU Xuan, LI De hua (State Education Commission Key Laboratory for Image Processing and Intelligent Control,Institute of Pattern Recognition and Artificial Intelligence Huazhong University of Science and Technology, Wuhan, 430074;China);Coordinate model and calibration algorithm of multi-joint arm[J];Optics and Precision Engineering;2001-03
8 YE Dong,HUANG Qing Cheng,CHE Ren Sheng (Dept. of Precision Instruments, Harbin Institute of Technology,Harbin 150001);A Error Model for Multi joint Coordinate Measuring Machine[J];OPTICS AND PRECISION ENGINEERING;1999-02
9 HU Xiao-chun,GUO Song-qing,YE Ming(School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,China);Research on the 3-dimensional finite element modeling of human foot-skeleton based on CT images[J];Journal of Hefei University of Technology(Natural Science);2005-09
10 Qiang Yujun; Jiang Dazheng; Sheng Kanglong (Shanghai Institute of Nuclear Research, Chinese Academy of Sciences, Shanghai 201800);Progress of Developing Industrial Computerized Tomography[J];Nuclear Physics Review;1994-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved