Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《安徽工学院学报》 1988-02
Add to Favorite Get Latest Update


Wu Yiping;Shi Zhanhua;Li Xizhang;Xiao Zhongyi Huazhong University of Science and Technology  
In this paper the temperature field of friction surface and secondary surfaceof die steel have been analyzed in thermal wear testing. The calculated surfacetemperature of 3Cr2W8V die steel is up to 740℃ and secondary surface tempera-ture 0.5 mm below the surface is high than 600℃. Using grindable thermocoup-le, the measured highest mean temperature is up to 800℃ and the maximum flashtemperature is up to 1200℃. The same results were obtained by metallographmethod (hardness method)and coincided were with calculated values. It is shownthe mean surface temperature is directly proportional to the workplace tempera-ture and friction speed. Obvious effect of normal stress was not observed.
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 10 Hits
1 YANG Ban-quan1,2,ZHANG Kun1,CHEN Guang-nan1,LUO Geng-xing1,XIAO Jing-hua1(1.Institute of mechanics,Chinese Academy of Sciences,Beijing 100190,China;2.Department of Engineering Mechanics,Armored Force Engineering Institute,Beijing 100072,China);An Acoustic Emission-Based Uniaxial Tensile Test Method for Evaluation of Fracture Toughness of a Coating on Its Substrate[J];Acta Armamentarii;2008-04
2 Chen Yaoting YangYaxu (Department of Polymer Science);The Heat Convertion and Its Adjustment of PVC Waterproof Sheet[J];;1990-01
3 LIU Jie LI Xiang WEI Gang(College of Materials Science and Engineering,Beijing University of Chemical Technology,Beijing 100029,China);Properties of waterborne solar-reflective heat-insulating coatings[J];Journal of Beijing University of Chemical Technology(Natural Science Edition);2009-01
4 Li Yuhua(Dept of Urban Construction Engineering, Beijing 100044);The Exploratorg of Comprehension and Analysis on Some Complex Concepts of Heat Conduction[J];JOURNAL OF BEIJING INSTITUTE OF CIVIL ENGINEERING AND ARCHITECTURE;1999-Z1
5 ZHANG Maicang, DONG Jianxin, ZENG Yanping, SUN Ying, YANG Zhongmin Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China Division of Structure Materials, Central Iron and Steel Research Institute, Beijing 100081, China;Dynamical microstructure evolution of Q235 low carbon steel during high temperature deformation[J];Journal of University of Science and Technology Beijing;2005-02
6 YAN Jingfu,LIU Jing,ZHOU Yixin,DENG Zhongshan Technical Institute of Physics and Chemistry,Chinese Academy of Sciences,Beijing 100080;High safety hybrid cryosurgical/hyperthermia probe via an adiabatic thin layer material[J];Beijing Biomedical Engineering;2008-01
7 SUN Bao-ping,DUAN Zhuo-ping,PI Ai-guo,OU Zhuo-cheng,HUANG Feng-lei(State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology,Beijing 100081,China);Approximate analysis on temperature rise in charge explosive during projectile penetration[J];Explosion and Shock Waves;2012-03
8 YANG Xi-yuan, WU Dan (College of Physics and Electronics, Hunan University of Arts and Science, Changde Hunan,415000);Molecular dynamics study of the melting point for refractory metals (Vanadium,Niobium, and Tantalum)[J];Journal of Hunan University of Arts and Science(Science and Technology);2008-03
9 XIAO Han jiang,DAI Chun fang,CUI Jian hua (Yangtze River Scientific Research Institute,Wuhan 430010,China);Inquiry into test method for measuring heat conductivity coefficient of polyethylene plastic pipe material[J];Journal of Yangtze River Scientific Research Institute;2001-05
10 WANG Yu-fei, YANG Zhen-guo, GUO Bao-shan(Department of Materials Science, Fudan University, Shanghai 200433, China);Finite Element Analysis of the Thermal Stress of the Ceramic Composite Piping Prepared by Centrifugal-SHS[J];Journal of Materials Engineering;2005-02
China Proceedings of conference Full-text Database 6 Hits
1 BIAN Lin,LI Shao-peng,GE Rui,YANG Huan (Institute of High Energy Physics,Chinese Academy of Sciences,Beijing 100049,China );Static thermal load analysis for EXFEL cryostat[A];[C];2009
2 CHEN Yong~1 FANG Liang~(1,2) ZHANG Shu-fang~1 DONG Jian-xin~1 GAO Ling~1 (1.Department of Applied Physics,Chongqing University,Chongqing 400044,China;2.Key Laboratory of Optoelectronic Technology and Systems of the Education Ministry of China,Chongqing University,Chongqing 400044,China);Study on effect of AIN thin films on thermolysis property of LED[A];[C];2007
3 Sidong LIU1,Xinfeng LI1,Xuemin CUI1,Haifeng LIU2,Qi CHAO2 1 School of Chemistry and Chemical Engineering,Guangxi University,Nanning,China,530004 2 Qi-li New Materials Science and Technology Limited Company of Guangxi,Beihai,China,536000;Research on Preparation and Properties of Reflective and Heat Insulation Coatings Based on Geopolymer[A];[C];2011
4 Lin Bing1,Jin Xiaofei1,Sun Pengcheng1,Wu Julong2,Feng Guojun2(1.China State Construction Engineering Corporation Ltd. Technical Center, Beijing 101300, China;2. China Construction Industrial Equipment Installation Co., Ltd.,Nanjing,Jiangsu 210046,China);Study on the Solar Temperature Field of the Grid Roof Structure of Nanjing Railway South Station Under Open-air Construction[A];[C];2012
5 ZHANG Qiang~(1,2),WU Chong~1,LU Gui-wu~1,SUN Zhi-jia~2, ZHOU Jian-rong~2,TANG Bing~2,XU Hong~2,YANG Guian~2, WANG Yan-feng~2 (1.China University of Petroleum,Beijing 102249,China;2.Institute of High Energy Physics, Chinese Academy of Sciences,Beijing 100049,China);Fe-Al Alloy Surface Tension and Expansion Coefficient of the Monte Carlo Simulation[A];[C];2011
6 WANG Li-juan,WANG Guo-dong,LIU Xiang-hua (The State Key Laboratory of Rolling Automation,Shenyang 110004 China);A Study on Welding Tailored Sheets With Cylindrical High Heat Source[A];[C];2006
Chinese Journal Full-text Database 10 Hits
1 Wang Haiqing, Li Li, Wang Chengguo Yao Yongqiang(Shandong University of Polytechnology, Jinan 250061) (Shandong Railroad Association, Jinan 250001);THE DEVELOPING TREND OF THE FRICTION MATERIALS APPLIED IN THE BRAKE SYSTEM OF TRAINS[J];Engineering Plastics Application;2000-05
2 Chen Haiyan, Wang Chengguo, Wang Haiqing, Zhuang Guangshan (School of Material Science and Engineering, Shandong University, Jinan 250061, China);SELECTION OF THE RESIN MATRIX IN THE FRICTION MATERIALS[J];Engineering Plastics Application;2003-03
3 HE Qing-hua, CHENG Ying (College of Electromechanical Engineering, Central South University, Changsha 410083, China);Serial Communication of PDA and PLC Based on Windows CE[J];Ordnance Industry Automation;2003-05
4 LI Feixue, ZHANG Wenming, FANG Mei Civil and Environment Engineering School, UST Beijing, Beijing 100083, China;Wet Multi-disc Brake Temperature Distribution[J];Journal of University of Science and Technology Beijing;2001-06
5 LI Jianping ①,③,ZHANG Bai ①,Xu Zhiqiang ②(①Northeast Institute of Geography and AgricultureEcology,C A S,Changchun 130012,China;②Engineering institute of geography information in Jilin province,Changchun 130061,China; ③Graduate School of the Chinese Academy of Sciences,Beijing 100039,China);Data communication between PDA and total station based on EVC[J];Science of Surveying and Mapping;2005-06
6 Yang Jingsheng (Beijing Research Institute of Powder Metallurgy,Beijing 100078);Development of Semimetal Brake Materials[J];Powder Metallurgy Technology;2001-03
7 Du Jianhua 1), Ding Huadong 1), Fu Suli 2), Han Wenzheng 1) 1) (Department of Materials Science and Engineering, Armored Force Engineering Institute, Beijing 100072) 2) (Department of Discipline, Armored Force Engineering Institute, Beijing 100072);Heat Transfer Model of Friction Sheets during Skidding[J];Powder Metallurgy Technology;2003-01
8 CAO Xian kun 1, WEN Di jiang 2, YAO An you 1 ( 1School of Mechanical & Electrical Engineering, Wuhan University of Technology, Wuhan 430070)( 2School of Material Engineering, Suzhou University, Suzhou 215006 );STUDY ON THE 1-2-3 MODEL FRICTION BRAKE COMPOSITE MATERIAL[J];ACTA MATERIAE COMPOSITAE SINICA;2000-02
9 LIN Xie-zhao,GAO Cheng-hui,HUANG Jian-meng(College of Mechanical Engineering and Automation,Fuzhou University,Fuzhou 350002,China);Effects of operating condition parameters on distribution of friction temperature field on brake disc[J];Journal of Engineering Design;2006-01
10 NATIONAL INSTRUMENTS;Data Acquisition Fundamentals[J];Foretgn Electronig Measurement Technology;2005-03
【Secondary References】
Chinese Journal Full-text Database 1 Hits
1 WANG Li-jie,XU De-kai;The development of the intelligent monitoring system of hydraulic disk brake based on STM32[J];Manufacturing Automation;2013-01
China Proceedings of conference Full-text Database 1 Hits
1 ;Development of the intelligent monitoring system for hydraulic disk brake of coal cutter[A];[C];2012
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved