Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Anhui Agricultural University》 2006-03
Add to Favorite Get Latest Update

Dynamic properties of engine oil pan

LI Zhao-wen~1,WANG Ji-xian~1,XIA Xi-quan~1,WANG Wu-lin~2,LI Hong-liang~2(1.School of Engineering,Anhui Agricultural University,Hefei 230036;2.China Automotive Technology and Research Center,Tianjin 300162)  
Based on the combination of modal analysis technology and finite element analysis(FEA),the modal test and modal parameter identification of engine oil pan were conducted to determine the natural frequencies and modes.The results could provide a basis for structure optimization and control of noise.
【Fund】: 天津市科委基础研究项目(05YFJMJC08700)资助
【CateGory Index】: TK40
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 5 Hits
1 GUO Ang,YU Hongliang,SONG Yuchao(Marine Engineering College,Dalian Maritime University,Dalian 116026,China);Influence of oil liquid on the oil pan modal[J];Journal of Dalian Maritime University;2011-01
2 LI Lilin,WU Suzhen(Department of Mechanical Engineering,Henan Institute of Engineering,zhengzhou 451191,China);Free Modal Analysis of Oil Pan of Diesel Engine[J];Journal of Henan Institute of Engineering(Natural Science Edition);2008-04
3 ZHANG Liang1,YANG Wei1,CHEN Xiaoan1,LIU Deyong2(1.State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,China;2.Chongqing No.2 Machine Tool Works,Chongqing 401336,China);Research on Inherence Properties of CK6310 NC Headstock[J];Machine Tool & Hydraulics;2008-02
4 Wang Yong,Zhang Yongli(Anhui Jianghuai Automotive Co.,Ltd.);Application of Test Modal Analysis Technology in Reducing Noise of Car[J];Automobile Technology;2009-05
5 ZHAO Wei-hua WANG Wei;A Modal Test System of Automatically Localizing Testing Points[J];Microcomputer Information;2012-10
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Shen Song (Department of Engineering Mechanics, Tsinghua University Beijing, 100084) Ying Huaiqiao Lei Suhua Zhao Zengxin (China Orient Institute of Noise & Vibration Beijing, 100085);Modal Test for Yellow River Bridge Exciting with Hammer[J];JOURNAL OF VIBRATION ENGINEERING;2000-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Zhang Yanhui Li Yongsheng Zhang Dianan (General Ironmaking Plant of Angang Steel Co.,Ltd.);Experiment Study on Improving Dust Cleaning Efficiency of BF Coal Gas Gravity Dust Collector[J];Angang Technology;2007-06
2 WANG Jing-hui~1,SHEN Xiao-pu~(1,2),ZHANG Hong-ya~2(1.School of Civil Engineering,Hefei University of Technology,Hefei 230009,China;2.Department of Civil Engineering,Anhui Institute of Architecture & Industry,Hefei 230022,China);Analysis and study of the very thin-walled light-gauge steel structural multiple story dwelling system[J];Journal of Anhui Institute of Architecture;2005-05
3 CHENG Xian-wen1,TAO Ling2,GUANG Qun2(1.The Institute of Architectual Design & Research,Bengbu 233000,China;2.School of Civil Engineer,Hefei University of Technology,Hefei 230009,China);Comparison of two methods for the analysis of laminated rectangular plate for the transverse-anisotropic and elastic media[J];Journal of Anhui Institute of Architecture & Industry(Natural Science);2007-01
4 ZHANG Wei YU Yingxia(Henan University of Science and Technology,Luoyang 471003,China );The Strength Analysis and Transfer-Segment Design of Ring-stiffened Cylindrical Shells[J];Journal of Anyang Institute of Technology;2008-02
5 LEI Yong,ZHENG Ying-ren(Department of Architectural Engineering,Logistical Engineering University of PLA,Chongqing 400041,China);ANSYS Analysis on Horizontal Deformation of Short Anti-sliding Pile in Soil Landslide[J];Chinese Journal of Underground Space and Engineering;2006-05
6 LEI Yong1,MA Fei2,ZHAO Yan-ming1(1,Department of Architectural Engineering,Logistical Engineering University of PLA,Chongqing 400041,China;2.Chongqing Geological Exploration Bureau,Chongqing 400040);Stability ANSYS Analysis of Frozen Cave[J];Chinese Journal of Underground Space and Engineering;2007-06
7 TAO Jin-ping1,CHU Heng-jun2,HUA Jian-wen1,WANG Mo-chang1(1.Shanghai Institute of Technical Physics,Chinese Academy of Sciences,Shanghai 200083,CHN;2.Machine College,Tongji University,Shanghai 200070,CHN);Light-weighting Design of Optics Bench in Atmospheric Sounding Interferometer[J];Semiconductor Optoelectronics;2006-06
8 HUANG Wan ( Baotou Iron and Steel Design and Research Institute , Baotou 014010, Nei Monggol, China);Application of computers in materials science[J];Science & Technology of Baotou Steel(Group) Corporation;2005-S1
9 YANG Li1 LI Feng2 ZHU Min2(1 Beijing Jingshui Construction Engineering CO.LTD,Beijing,102300,China;2 Sanxia University,Yichang,Hubei,443002,China);Confined unit simulation of the Caohe aqueduct stress field[J];Beijing Water;2011-01
10 CHE Li1,WANG An-hua2,WANG Wei1,ZHU Pei-gang1,XIE Jiang-wei1(1.TBET Shenyang Transformer Group Co.,Ltd.,Shenyang 110144,China;2.Heilongjiang Institute of Science and Technology,Harbin 150027,China);Reason Analysis of Deformation Fault in Transformer Tank and Its On-Site Repair[J];Transformer;2012-04
China Proceedings of conference Full-text Database 10 Hits
1 Guiyin Zeng1,Haibao Liu1,Sihua Zhang1,Jingying Tan2,Rui Zhang1(1.Key Laboratory of Bionic Engineering,Ministry of Education,Jilin University,Changchun 130025;2.Department of Mechatronics,Hunan Inst itute of Science and Technlogy,Yueyang 414000);Optimization Structure Design of Converging-diverging Tube Heat Exchanger[A];Chinese Society of Agricultural Engineering[C];2011
2 YU Ying-xia,ZHANG Wei(School of Planning and Architectural Engineering of Henan University of Science and Technology,Luoyang 471003,China);The Establishment of FEM Model and Strength Analysis of Ring-stiffened Cylindrical Shells[A];[C];2010
3 Wang Ruifeng~1 Jia Lianguang ~1 Wu Liang~2 (1.School of Civil Engineering,Shenyang Jianzhu University,Shenyang 110168,China;2.Shenyang Radio and television University,Senyang 110003,China);Analysis on Performance of The Beam-Column Node of Cellular Steel Frame[A];[C];2010
4 LUO Qi-zhin, LIU Xi-yuan , HUANG Jun-yi University of Science and Technology of Foshan, Guangdong Foshan, 528000 P.R.China;Study on effect of diaphragm and angle brace on shear lag of thin-walled box girder[A];[C];2004
5 WEN Yan, VAN Ji-xiang (Department of Optical Engineering, Beijing Institute of Technology, Beijing 100081, China);The simulation study of interaction of laser with matenal based on ANSYS[A];[C];2005
6 Wu sheng chuan, liu jian hua (department of Material Science and Engineering, Hust, Wuhan, 430074);Three-dimensional FEM simulation Of the hybrid welding temperature field of the light metal[A];[C];2005
7 Yu Yousheng Lu Wei (College of Material Science and Technology, Wuhan University of Technology, Wuhan Hubei 430063);Research on the working stress distribution and the stress concentration efficiency in butt joint[A];[C];2005
8 Wang Lin-ge~1 Zhang Yao-ting~2 (1.Pingdingshan Institute of Technology,Pingdingshan 467001,China;2.Central China University of Science and Technology,Wuhan 430074,China);The Analysis of reinforced concrete beams strengthened by bonded steel plates in compression zone by ANSYS[A];[C];2009
9 WANG Cheng-yuan WANG Jian XIA Jia-kuan (Electric Engineering Institute of Shenyang University of Technology,Shenyang 110023,Liaoning Province,China);The Design of Permeance Modulating Permanent Magnet Linear Servo Motor[A];[C];2007
10 Yao Zhishu~1 Gui Jiangang~1 Cheng Hua~1 Rong Chuanxin~(1,2) (1.Anhui University of Science and Technology Anhui Huainan 232001 2.University of Science and Technology of China Anhui Hefei 230026);Study onnumerical simulation for the load bearing capacity of the composite shift lining of inner steel cylinder and high strength reinforced concrete[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Liao Ridong Zuo Zhengxing Zou Wensheng (Beijing Institute of Technology, Beijing, 100081);A STUDY ON THE METHOD OF APPLICATION OF BOUNDARY CONDITIONS FOR THE FINITE ELEMENT ANALYSIS OF CYLINDER HEAD SUBJECTED TO MECHAICAL LOADS[J];Acta Armamentarii;2001-01
2 Xue Mingde Ding Hongwei Wang Lihua (Dept of Engineering Mechanics,Tsinghua University, Beijing, 100084);3-D FINITE ELEMENT ANALYSIS OF THE TEMPERATURE FIELD, THERMAL DEFORMATION AND STRESS OF PISTONS IN DIESEL ENGINES[J];Acta Armamentarii;2001-01
3 LUO Qing-guo,LIU Hong-bin,GONG Zheng-bo,GUI Yong(Department of Mechanical Engineering,Academy of Armored Forces Engineering,Beijing 100072,China);Study on the Fluid-Solid Coupled Heat Transfer of the Diesel Engine Cylinder Head[J];Acta Armamentarii;2008-07
4 WANG Jing, LIU Mei-lian, FENG Tao(College of Mechanical Engineering and Automation, Beijing Technology and Business University, Beijing 100037, China);FEM CALCULATING TRANSMISSION PROPERTY OF SILENCER[J];Journal of Beijing Technology and Business University (Natural Science Edition);2005-04
5 SONG Yu-chao, YU Hong-liang (Marine Engineering College, Dalian Maritime University, Dalian 116026, China);Modal analysis of the double bottom frame of ships[J];Ship Engineering;2008-01
6 Yajiang LI; Zengda ZOU and M. Thompson (Dept. of Materials Engineering, Shandong University of Technology, Jinan 250061, China)(To whom correspondence should be addressed);Microstructure and Fracture Morphology in the Welding Zone of Cr18Mo2 Ferritic Stainless Steel[J];材料科学技术(英文版);1996-06
7 YAN Wen bing, JIANG Shao zhong, WANG Fu ming, FAN Wen xin (Dept. of Mechatronics Engineering, North China Institute of Technology, Taiyuan 030051, China);Experimental Comparative Research on Two Mounting Components[J];JOURNAL OF TEST AND MEASUREMENT TECHNOLOGY;2000-04
8 ;柴油机瞬态工况振动噪声的测量和分析[J];Design and Manufacture of Diesel Engine;2002-02
9 Zhang Guangjiong, Zhang Baocheng (College of Mechanical Engineering & Automation, North University of China, Taiyuan 030051, China);Topology Optimization Design of Diesel Engine Oil Pan Based on HyperWorks[J];Design and Manufacture of Diesel Engine;2010-01
10 Lu Weilun (Shanghai Marine Diesel Engine Research Institute);Three-dimensional Finite Element Analysis of Strength for the Cylinder Head of 61 30 Type Diesel Engine[J];Diesel Engine;1989-05
China Proceedings of conference Full-text Database 1 Hits
1 Wang Zhong , Zhang Peng , Xia Heng , Yan Xuewen (School of Automobile and Traffic Engineering, Jiangsu University, Zhenjiang 212013 ,China; Wuxi Diesel Engine Works ,FAW Jiefang Automotive Company, Ltd.,Wuxi 214026,China );Experimental Study on Reducing Noise of Diesel Engine by Composite Material[A];[C];2006
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 GUO Ang,YU Hongliang,SONG Yuchao(Marine Engineering College,Dalian Maritime University,Dalian 116026,China);Influence of oil liquid on the oil pan modal[J];Journal of Dalian Maritime University;2011-01
2 ZHOU Li1,LI Ai-ping2,XIE Nan2(1.School of Mechanical Engineering,Shanghai Dianji University,Shanghai 200245,China;2.School of Mechanical Engineering,Tongji University,Shanghai 201804,China);Research of Spindle Dynamic Characteristics of CNC Machine Tool[J];Journal of Donghua University(Natural Science);2012-05
3 HU Jun-jun,XU Wu-bin,ZHANG Hong-xian,TANG Man-bin(Department of Mechanical Engineering,Guangxi University of Technology,Liuzhou 545006,China);Modal analysis and modification design of the VMC-1000 spindle box[J];Machinery Design & Manufacture;2011-01
4 HU Shi-jun1,2,GAO Chang-song1,2,FU Rong-kai1,2,GUO Chao1,2(1Key Laboratory of Digital Manufacturing Technology and Application,the Ministry of Education, Lanzhou University of Technology,Lanzhou 730050,China)(2School of Mechanical and Electronical Engineering,Lanzhou University of Technology,Lanzhou 730050,China);Structural optimization for counter spindle box of CW6185[J];Machinery Design & Manufacture;2011-06
5 WANG Qing-fu1,ZHAO Hong-lin1,LI Dian-xin1,WU Zhi-heng2,ZHANG Hua-wei2,ZHANG Guang-peng3,MU Dong-hui4,CHEN Shi-guang1(1 China University of Petroleum (Beijing),Beijin102249,China;2 Guangdong Machinery Research Institute,Guangzhou 510635,China;3 Xi'an University of Technology,Xi'an 710054,China;4 Beijing No.2 Machine Tool Works Co.;Ltd.Beijin 100072,China);Research on Model Simplification and Characteristics Recurrence from Global Machine[J];Mechanical & Electrical Engineering Technology;2010-12
6 YI Jiang-miao,GAO Dong-qiang,ZHANG Fei,LIN Huan;Modal analysis and optimization of DVG850 worktable system based on ANSYS Workbench[J];Manufacturing Automation;2012-23
7 XU Hao,RUI Zhi-yuan,WANG Fu-qiang(Lanzhou University of Technology,Mechanical and Electrical Engineering College,Gansu Lanzhou 730050,China);Box Optimization Design for Large Friction Welder Spindle Based on the Finite Element[J];Machinery Design & Manufacture;2013-03
8 ZHENG Jie 1,ZHOU Hong-gen 1,GU Ming 2,PU Jun-yang 1(1.Institute of Modern Manufacturing,Jiangsu University of Science and Technology,Zhenjiang 212003,China;2.Zhenjiang Watercraft College,P.L.A,Zhenjiang 212003,China);Multidisciplinary Design Optimization for Oil Bottom Shell of Marine Diesel Based on iSIGHT[J];Mechanical Engineer;2013-04
9 DUAN Tie-qun,YANG Zhen-qi,GAO Yuan(School of Mechanical and Power Engineering,Harbin University of Science and Technology,Harbin 150080,China);The Vibration Characteristics Analysis of the Bearing Positioning Lip Special Milling Machine of Milling Rod[J];Journal of Harbin University of Science and Technology;2013-02
10 HUA Jian,ZHOU Si-zhu(School of Mechanical Engineering,Yangtze University,Jingzhou 434023,China);Modal Experiment and Analysis of Automobile Steering Column[J];Tractor & Farm Transporter;2010-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved