Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《ORDNANCE MATERIAL SCIENCE AND ENGINEERING》 2000-03
Add to Favorite Get Latest Update

INVESTIGATION OF CRACK GROWTH BEHAVIORS OF MEDIUMMANGANESE CAST STEEL

Han Wenzheng,Ma Lili,Zhang Ping,Jiang Houwen,Yu Yuanhong  
Compact Tension Method (CT test) was used to investigate the crack growth behavior of a medium manganese cast steel and accordingly a regression expression for crack growth rate is obtained based on the test data.SEM and Microzone Phase Structure Analysis (MPSA) help to describe the process of fatigue crack growth of the steel.The result shows that the transformation plasticity produced at the crack tip during the strain induced transformation from austenite to martensite lowers the crack growth rate.
【CateGory Index】: TG115.57
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 ZHAO Jun-jun,ZHANG Ping(Department of Remanufacture Engineering,Institute of Armored Force Engineering,Beijing 100072);Self Strengthening Mechanism of High and Middle Manganese Steel Hardfacing layer[J];China Surface Engineering;2006-03
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Zhang Jiliang Han Wenzheng Liu Shican Jiang Houwen Xie Fengkuan;Present Condition and Discussion of Material for Tank Track plate[J];Journal of Armored Force Engineering Institute;1997-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LI Qiang, ZHAO Yu-feng, DONG Zhi-zhong, CHEN Jin-ming (School of Materials Science & Engineering, Tianjin University, Tianjin 300072, China);Development of ferrous shape memory alloy 0Cr12Ni6Mn16Si5[J];Ordnance Material Science and Engineering;2002-05
2 SUN Guo - guang, ZHANG Yu - xin, LIU Wen - xi , CHEN Jin - ming (School of Materials Science & Engineering, Tianjin University, Tianjin 300072, China);Influence of thermal - mechanical repeated training on shape memory effect of FeMnSiCrNi alloy[J];Ordnance Material Science and Engineering;2005-02
3 Chen Fenghua,Zhang Mingang,Chai Yuesheng,Yang Libin,Xiong Jie (College of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China);;Preparation and Performance of the Ni-Mn-Ga Magnetron Sputtering Target Material Alloy[J];Micronanoelectronic Technology;2011-09
4 Cuj Naiyi ( Department of Fundamental Sciences );A LARGE AMPLITUDE LATTICE DYNAMICS MODEL OF THE THREE DIMENSIONAL CRYSTAL DISPLACIVE PHASE TRANSITIONS[J];Journal of North China University of Technology;1989-03
5 ZHANG Maicang, DONG Jianxin, ZENG Yanping, ZENG Fan Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Microstructure Evolution Analysis of 302HQA Stainless Steel during the Cold Forming Process[J];Journal of University of Science and Technology Beijing;2004-02
6 AN Lin 1) ,HAN Jingtao 1) ,CHEN Jun 2) 1) Material Science and Engineering School,University of Science and Technology Beijing,Beijing 100083,China2) Shougang Dongxing Industry Corporation,Yantai 264006,China;WC-20%Co cermet composites added ZrO_2(3Y) for toughening and strengthening[J];Journal of University of Science and Technology Beijing;2006-10
7 Ma Lili; Han Wenzheng; Wen Yuanhe;A study on the strengthening characteristic of Substable Austenetic Manganese Steel[J];CHINA SURFACE ENGINEERIGN;1998-02
8 HAN Wen-zheng,XU Bin-shi,ZHANG Ping,LIU Shi-can,JIANG Hou-wen (National Key Laboratory for Remanufacturing,Beijing, 100072);The Strengthen Mechanism of Cost Steel Mn8CrMo[J];China Surface Engineering;2003-03
9 LIU Zong-chang(Material and Metallurgy School,Inner Mongolia University of Science and Technology,Baotou 014010,China);Appraise of the doctrine of martensitic shear[J];Journal of Inner Mongolia University of Science and Technology;2008-04
10 LIU Zong-chang,WANG Hai-yan,REN Hui-ping (Material and Metallurgy School,Inner Mongolia University of Science and Technology,Baotou 014010,China);A new appraise of the doctrine of martensitic shear[J];Journal of Inner Mongolia University of Science and Technology;2009-02
China Proceedings of conference Full-text Database 6 Hits
1 HUANG Shu-ke~1 LINing~1 WEN Yu-hua~1 TENG Jin~1 XO Yong-gang~2 (1.School of Manufacturing Science and Engineering,Sichuan University,Chengdu 610065,China; 2.State Key Laboratory of Mechanical System and Vibration,Shanghai Jiao tong University,Shanghai 200240,China);Study of damping mechanism of Fe-Mn alloy using dislocation-moving theory[A];[C];2007
2 Lin Xian~1 Ye Jiansong~1 Wu Xiaoliang~1 Yu Guosong~1 Wang Wengui~2 Yu Liquan~3 (Hangzhou Iron and Steel Group Company: 1. Technology Centre; 2. Yatong Company; 3. High Speed Wire Rod Company, Hangzhou 310022);STUDY ON THE COMPOSITION OF AUSTENITE STAINLESS STEELS WITH LOW NICKEL IN COLD HEADING WIRE ROD[A];[C];2005
3 QIAO Zhi-xia~(1,2) LIU Yong-chang~1 NING Bao-qun~1 FU Jun-guo~1 HAN Ya-jing~1 (1.College of Materials Science and Engineering,Tianjin University,Tianjin 300072,China; 2.College of Mechanical Engineering,Tianjin University of Commerce,Tianjin 300134,China);Effect of cooling rate on microstructure in 675 armor steel[A];[C];2007
4 NING Bao-qun~1 LIU Yong-chang~1 XU Rong-lei~1 YANG Liu-shuan~2 (1.College of Materials Science and Engineering,Tianjin University,Tianjin 300072,China; 2.Pingdingshan Institute of Technology,Pingdingshan 467001,China);Influence of thermomechanical treatment processing (TMTP) on microstructures of T91 steel[A];[C];2007
5 YI Min;CHEN Tao;WANG Lifeng;TONG Qian;Shougang Research Institute of Technology;;Effect of Tempering Temperature on Toughness of Si-Mn Bainitic Steel[A];[C];2014
6 Li Shunrong;Xing Lu;Yang Xiangyue;Chen Haiyun;Zhu Ling'ai;Hangzhou Special Equipments Inspection Institute;;Research on Deformation-Induced Martensite Testing of Two Austenitic Stainless Steels[A];[C];2013
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Wang Zhongjue Xu Zhongsheng (Anhui Institute of Mechanical and Electrical Engineering Wuhu 241000);Research on the Quality Stability of High-Mn Steel of RE Modification[J];JOURNAL OF ANHUI INSTITUTE OF MECHANICAL AND ELECTRICAL ENGINEERING;1999-02
2 Han Wenzheng,Zhang Ping,Zhang Jiliang,Ma Lili,Yu Yuanhong;INVESTIGATION of In-SERVICE STRENGTHENING CHARACTERISTICS OFTANK TRACK PANS MADE OF MEDIUM MANGANESE CAST STEEL[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;2000-04
3 DING Shou-xiang (No.52 Institute of China Ordnance Industry, Baotou 014034, China);Fatigue failure of heavy-duty gear surface and its prevention[J];Ordnance Material Science and Engineering;2002-01
4 ZHANG An-feng, LI Di-chen, LU Bing-heng (State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China);Research progress in laser direct metal rapid prototyping technology[J];Ordnance Material Science and Engineering;2007-05
5 Wang Huaming Zhang Lingyun Li An Cai Liangxu Tang Haibo (School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Rapid solidification laser processing and forming of advanced aeronautical metallic materials[J];Journal of Beijing University of Aeronautics and Astronautics;2004-10
6 HAN Wen-zheng,XU Bin-shi,ZHANG Ping,LIU Shi-can,JIANG Hou-wen (National Key Laboratory for Remanufacturing,Beijing, 100072);The Strengthen Mechanism of Cost Steel Mn8CrMo[J];China Surface Engineering;2003-03
7 YANG Xi-chen, LI Hui-shan, LIU Yun-wu, WANG Yun-shan, TANG ying, SUN Rong-lu (Laser Processing Center, Tianjin Polytechnial University, Tianjin 300160);Laser Remanufacturing Technology and Its Industrial Application[J];China Surface Engineering;2003-04
8 CHEN jiang,LIUYu-lan (Shen Yang Dalu Laser Technology CO.,LTD);The Engineering Application of Laser Remanufacturing Technology[J];China Surface Engineering;2006-S1
9 LV Yao-hui, XU Bin-shi, XIANG Yong-hua, LIU Cun-long (National Key Laboratory for Remanufacturing, Beijing 100072);The Microstructure and Property of Ni-based Overlay Prepared by Plasma Overlaying on Grey Cast Iron[J];China Surface Engineering;2009-01
10 ZHANG Wei ping, LIU Wen yan (Material Department, Dalian University of Technology 116012,China);Progress of Laser Cladding about Ceramic Coating[J];Surface Technology;2001-04
【Secondary References】
Chinese Journal Full-text Database 8 Hits
1 ZHAO Jun-jun,ZHANG Ping(Department of Remanufacture Engineering,Institute of Armored Force Engineering,Beijing 100072);Self Strengthening Mechanism of High and Middle Manganese Steel Hardfacing layer[J];China Surface Engineering;2006-03
2 CHEN Zong-hao,HAN Wen-zheng (Department of Remanufacture Engineering, Academy of Armored Forces Engineering , Beijing 100072);Effect of Accumulated Impact Energy on Strain–induced Martensite Transformation of Surface Layer in ZGMn8CrMo[J];China Surface Engineering;2008-05
3 CONG Guo-zhi,CHEN Chun-huan(School of Materials Science and Engineering,Dalian Jiaotong University,Dalian 116028,China);Development of a New Type Overlaying Electrode for High Manganese Steel[J];Journal of Dalian Jiaotong University;2008-06
4 WANG Yan;LIU Jiawei;College of Mechanical & Power Engineering,China Three Gorges University;;Research on microstructure and properties of D256 hardfacing joint[J];Electric Welding Machine;2015-03
5 CHEN Zong-hao,HAN Wen-zheng(Faculty of Remanufacture Engineering,Academy of Armored Forces Engineering,Beijing 100072,China);Study on martensite transformation in impact-abrasive surface of ZGMn8CrMo cast steel[J];Heat Treatment of Metals;2009-03
6 Shi Qiu-fang;Wang Guan-cong;Zhang Shuo;Shandong Energy Group Co., Ltd.;;Remanufacturing technology of mine cutting tooth based on laser cladding[J];Shandong Coal Science and Technology;2014-12
7 MA Zhuang,TIAN Lin,LI Zhichao,DONG Shizhi,ZHOU Peng(College of Material Science and Engineering,Liaoning Technical University,Fuxin 23000,China);Iinfluence of Authigenic Carbide on Microstructure and Properties of Hadifield Steel[J];Hot Working Technology;2013-03
8 NIU Li-bin,XU Yun-hua,ZHANG Xia-ni,CAI Mei(Institute of Wear Resistance Materials,School of Mechanical and Electrical Engineering,Xi'an University of Architecture and Technology;Xi'an 710055,China);Microstructure and Wear Resistance of High Chromium Cast Iron Bars/High Manganese Steel Composite[J];Foundry Technology;2009-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved