Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《ACTA ARMAMENTARII》 1999-04
Add to Favorite Get Latest Update

ON THE JET CURRENT MELTING AND SOLIDIFICATION IN THE INTERFACE OF EXPLOSIVE CLADDING STEEL SYSTEM

Zhao Haofeng Zheng Yu Wang Wenxian Zhang Fenglin(Taiyuan University of Technology, Taiyuan, 030024)Xue Geng(Yangquan Xiangda Composites Factory)  
The paper deals with the formation of melting zone in the interface of explosive cladding austenitic stainless steel/normal low alloy steel system .It is discovered through test that the interface melting zone is formed as a result of jet current. The melting of metal jet current results not only from adiabatic sheering, but the friction between jet current and base plate also plays an important role in jet current melting .The solidification structure in the melting zone, which has an important influence on the quality of the cladding plate, has a close relationship to the technical process adopted in explosive welding.
【CateGory Index】: TG456.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 WEN Chao,GUAN Jin-qing,ZHOU Gang,LIU Xiao-xin,LI Xun (Northwest Institute of Nuclear Technology,Xi'an 710024,Shaanxi,China);Experimental Research on Dynamic Compression Property of 16MnR+0Cr18Ni9Ti Stainless Steel Clad Plate[J];Acta Armamentarii;2009-S2
2 WANG Jianmin,ZHU Xi,LIU Runquan (Dept. of Naval Architecture & Ocean Eng. ,Naval Univ. of Engineering, Wuhan 430033);Application and Development of Explosive Welding[J];Materials Review;2006-01
3 SHI Ye-hua;DUAN Zi-hua;College of Chemistry and Chemical Engineering,Taiyuan University of Technology;;Research Progress of High-temperature Creep Properties in Clad Steel Plate Interface[J];Chemical Engineering & Machinery;2013-05
【Citations】
Chinese Journal Full-text Database 1 Hits
1 ZHOU Bangxin;SHENG Zhongqi;PENG Feng Southwest Center for Nuclear Reactor Engineering Research and Design;TEM STUDY OF BONDING LAYERS IN DISSIMILAR ALLOY EXPLOSIVE BONDING JOINTS[J];Acta Metallrugica Sinica;1989-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 XU Xu-da,JIANG Feng,JIANG Chun-li,TONG Yong-gang,YANG Zu-yong,WANG Lie-xian (School of Materials Science and Engineering,Central South University,Changsha 410083,China);Investigation on friction mechanism and wear behavior of SiC_p/ZL109[J];Ordnance Material Science and Engineering;2008-05
2 Xie Ting, Tribology Institute, Hefei Univ of Tech, Hefei 230009;INFLUENCE OF ENVIRONMENTAL FACTORS ON SLIDING WEAR OF METALS[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1997-03
3 Gao Yongsheng; Zou Jiaxiang; Ye Xilin; Shi Xiaolu; Zhou Jihua(Department of Metal Forming, USTB, Beijing 100083, PRC)( Mechanical Engineering College, USTB);Axial Dynamic Characteristica of the Roll System of 4-H Strip Mill ──Study on the Axial Mechanical Behavior of 4-H Strip Mills (Ⅳ)[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1995-01
4 Ma Yansheng; Liu Jiajun;Gu Zhengqiu;Wu Yinshun(Department of Surface Science and Corrosion Engineering. USTB. Beijing 100083, PRC)(Tribology Research Institute, Tsinghua University. Beijing 100084);Lubricating Mechanism of Oil EP/AW Additives on Ni-P Brush Plating Layer[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1995-01
5 Zhang Yuan Jin Baohong Fu Chengju (Wuhan University of Technology);FRICTIONAL RESISTANT COMPOSITE-STUDY OF MODIFIED PHENOLICS[J];FIBER REINFORCED PLASTICS/COMPOSITE;1999-05
6 ZHANG Xiao-juan,SUN Le-min,LI Ai-na,ZHANG Yong-zhen(Institute of Material Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China);Friction and Wear Behavior of 45CrNi Pair[J];Materials Protection;2007-07
7 ZHANG Bin,HU Zheng-fei,HE Guo-qiu,MA Xing-chi(Shanghai Key Laboratory for Research & Development and Application of Metallic Functional Materials,School of Materials Science and Engineering,Tongji University,Shanghai 200092,China);Influence of sliding velocity on friction properties of copper-graphite slide plate materials[J];Materials Science and Technology;2010-03
8 ZHOU Lan-ying, YANG Jian, JIA Qing-lian (School of Mechanical Engineering & Automation, Beijing Institute of Technology, Beijing 100081,China);Characteristics of TiN Coating in Tribology and Metallography[J];Journal of Materials Science and Engineering;2003-01
9 DENG Xin-ping, NIE Xiong, LIN Yuan-zu, YE Jiang-chao (1.College of Mechanical Engineering, Guangxiu University, Nanning 530004, China; 2.College of Computer and Information Engineering, guangxi University, Nanning 530004,China; 3.Guangxi Import and Export Commodity Inspection & Quarantine Bureau, Nanning 530022,China);Research on the Friction and Wear Properties of Alumina Short Fiber Reinforced ZA27 Alloy Composite[J];Materials Science and Engineering;2003-05
10 NING Li-ping, WANG Qi-hua, JIAN Ling-qi (State Key Laboratory of Solid Lubrication, Lanzhou Institute of chemical Physics, Chinese Academy of Science, Lanzhou 730000, China);Advances in Studies of Tribological Properties of Glass-Ceramics[J];Journal of Materials Science and Engineering;2005-02
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 SHI Chang gen,WANG Yao hua,ZHOU Chun hua,CAI Li gen (Engineering Institute of Engineering Corps,Plaust,Nanjing 210007,China);T10-20G Explosive Welding Cladding Plate[J];Blasting;2001-02
2 DUAN Weidong,XIONG Zuzhao,MA Jianjun,ZHONG Dongwang (College of Science, Wuhan University of Science and Technology, Wuhan 430081, China);Analysis and Comparison of The Theoretical Calculation Velocity of Flying Plate with The Result of Experiment in Explosive Welding[J];Blasting;2003-02
3 YAN Hong-hao,LI Xiao-jie (State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024,China);The Extended Application of Explosive Welding Technology[J];Blasting;2005-01
4 Yang Wenbin;Xi Jinyi;Sun Ming;Dong Shouhua;Li XiaojieDalian University of Technology(Liaoning, 116023);Interface Wave and Its Effects on Explosive Clad Plate[J];EXPLOSIVE MATERIALS;1998-04
5 Li Xiaojie; Yang Wenbin; Xi Jinyi; Dong Shouhua; Sun Ming(Dalian University of Technology Liaoning, 116024 );Calculation of the Moving Velocity of Flyer Plate in Explosive Welding[J];EXPLOSIVE MATERIALS;1998-06
6 Li Xiaojie, Yang Wenbin, Xi Jinyi, Dong Shouhua, Sun Ming Dalian University of Technology(Liaoning, 116024)[;The Lower Limit of Explosive Welding Parameter Window for Bimetal[J];EXPLOSIVE MATERIALS;1999-03
7 Duan Weidong, Lu Zaosheng, Ma Jianjun, Zhong Dongwang Wuhan Yejin University of Science and Technology(Wuhan,430081) Huang Fenglei Beijing University of Science and Technology(Beijing,100081)[;Experimental Investigation on Explosive Welding of the Gliding Block of Driving Engine[J];EXPLOSIVE MATERIALS;1999-04
8 Wang Yuxin, Yang Wenbin, Li Xiaojie Dalian University of Technology(Liaoning,116023)[;Computerized Simulation of Two Dimensional Flying Attitude of Fly Plate in Explosive Welding[J];EXPLOSIVE MATERIALS;1999-05
9 Shi Changgen,Li ZiquanMaterials Science and Technology Institute,Nanjing University of Aeronautics and Astonautics(Nanjing,210016)Wang Yaohua,Ji HuiyongEngineering Institute of Engineering Corps,PLAUST,Nanjing(Nanjing,210007);Study on the Interface Quality of Explosive Welding on Unsteady Detonation Distance of 2~# Rock Ammonium Nitrate Explosive[J];Explosive Materials;2005-06
10 Li Xiaojie(Research Institute of Engineering Mechanics, Dalian University of Technology);THE UPPER LIMIT OF BIMETAL EXPLOSIVE WELDING PARAMETERS[J];Explosion and Shock Waves;1991-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Zhi-ying1,PENG Lei1,LIU Run-sheng2,YANG Zheng1,ZHAO Fu-xing1(1.Institute of Human Settlement and Civil Engineering, Xi'an Jiaotong University,Xi'an 710049,Shaanxi,China; 2.Baoji Titanium Industry Group Ltd.,Baoji 721014,Shaanxi,China);A study on explosion welding defects of large-sized plates[J];Explosion and Shock Waves;2012-01
2 TIAN Jiansheng (Civil Department China University of Mining & Teehnology,Xuzhou 221008);Research and Application Development of Explosive Welding Technique[J];Materials Review;2007-11
3 ZHANG Wen-yu(The 725th Research Institute of China Shipbuilding Industry Corporation,Luoyang 471039,Henan,China);PRESENT STATUS AND PROSPECT OF EXPLOSIVE WELDING TECHNOLOGY APPLICATION[J];Engineering Blasting;2009-04
4 Lei Peng Zhiying Zhang(Institute of Human Settlement and Civil Engineering,Xi'an Jiao Tong University,Xi'an,710049);INFLUENCE OF THE PLATE SIZE ON THE EXPLOSIVE WELDING QUALITY OF LARGE-SIZED PLATE[J];Chinese Journal of Solid Mechanics;2012-02
5 LIU Huan,ZHENG Xiaoran(School of Metallurgical Engineering,Xi'an University of Architecture and Technology,Xi'an 710055);The Manufacturing Technique of Clad Metals Sheet[J];Materials Review;2012-S2
6 BAI Yun-qiang~1,HUANG Wen~2,WANG Zhang-zhong~1,DAI Yu-ming~1,TANG Xian~1 (1.School of Materials Science and Engineering,Nanjing Institute of Technology,Nanjing 211167,China; 2.Nanjing Duble Metal Equipment Engineering Co.,LTD,Nanjing 211153,China);Microstructure and Mechanical Properties of Explosive Clad Plates of 2205 Duplex Stainless Steel and Q345 Low Alloy Steel[J];Materials for Mechanical Engineering;2012-12
7 LI Chang-qing;MA Shi-ning;Department of Equipment Maintenance and Remanufacturing,Academy of Armored Force Engineering;;Research on the Technology System of Equipments Maintenance[J];China Surface Engineering;2013-05
8 ZHANG Jin-min (Luoyang Ship Material Research Institute, Luoyang 471039, Henan Pro., China);The features of spinodal decomposition beside the interface in 321/Qd370qD explosive welded plate[J];Welding Technology;2008-03
9 BAI Yun-qiang1,DENG Jia-ai2,WANG Zhang-zhong1,BA Zhi-xin1,DAI Yu-ming1(1.Department of Materials Science and Engineering,Nanjing Institute of Technology,Nanjing Jiangsu 211167,China; 2.Nanjing Duble Metal Equipment Engineering Co.,Ltd.,Nanjing Jiangsu 211153,China);Effect of heat treatment on microstructure and properties of explosive clad plates of 2205 duplex stainless steel-Q345 carbon steel[J];Heat Treatment of Metals;2011-11
10 YANG Yong-Shuna,b,YANG Dong-Donga,b,YANG Minga,b,GUO Jun-Qinga,b (a.Materials Science & Engineering School;b.Henan Key Laboratory of Advance Nonferrous Metal,Henan University of Science & Technology,Luoyang 471003,China);Hot Extrusion Forming Process of Copper and Aluminum Composite[J];Journal of Henan University of Science & Technology(Natural Science);2011-06
China Proceedings of conference Full-text Database 1 Hits
1 Liu Xin Zhao Enjun Chen Lei Li Zijian Ren Hu Liu Ou (Dalian Shipbuilding Industry Explosive Processing Research Co.,Ltd., Liaoning Dalian,116023);Reasons of and Measures to Prevent the Thinning of Clad Plate by Explosive Welding[A];[C];2012
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 ZHOU BANGXIN SHENG ZHONGQI (Southwest Institute of Nuclear Reactor Engineering);A STUDY OF METALLURGICAL BONDING BETWEEN ZIRCALOY-2 AND AUSTENITE STAINLESS STEEL[J];Chinese Journal of Nuclear Science and Engineering;1983-02
2 by Zhou Bangxin and Liu Qixiu;RECRYSTALLIZATION OF Al AND Cu SINGLE CRYSTALS AFTER TENSILE DEFORMATION[J];Acta Metallrugica Sinica;1981-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved