Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Armamentarii》 2001-01
Add to Favorite Get Latest Update

3-D FINITE ELEMENT ANALYSIS OF THE TEMPERATURE FIELD, THERMAL DEFORMATION AND STRESS OF PISTONS IN DIESEL ENGINES

Xue Mingde Ding Hongwei Wang Lihua (Dept of Engineering Mechanics,Tsinghua University, Beijing, 100084)  
In this paper 3 D FEM analysis of the temperature field and heat transfer in the piston of a high powered diesel engine is given applying the MARC software The thermal deformation and stress fields are calculated as well The results enable one to locate where and why failures might happen and provide a reference to improve piston design
【CateGory Index】: TK421
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 LI Jiang-hua, WU Jing(College of Port and Shipping Engineering, Guangdong Communication Polytechnic, Guangzhou 510800, China);Study on the defects analysis and design technology improvement of marine diesel engine piston[J];Ship Engineering;2008-02
2 SUN Xiu feng, FENG Li yan, XU Feng (Inst.for IC Engine,Dalian Univ.of Tech., Dalian 116023, China);The Progress of Finite Element Analysis on IC Engine Piston Assembly[J];Vehicle Engine;2002-06
3 Jiang Libiao(Harbin Institute of Technology at Weihai, Weihai 264209, P. R. China); Wang Jingchun(Agriculture and Biology Engineering College of Jilin University); Ma Yue(Harbin Institute of Technology at Weihai);CADCAE Integrated Design for CA488 Piston[J];Journal of Northeast Forestry University;2004-03
4 Guo Ce~1 Sun Qinghong~2(~1College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China)(~2Department of Mechanical Engineering, Southeast University, Nanjing 210096, China);Analysis of thermal characteristics and thermal deformation of high-speed spindle system in NC precision lathe[J];Journal of Southeast University (Natural Science Edition);2005-02
5 LI Jiong, YANG Shi-wen, ZHANG Yi, SU Tie-xiong (Dept. of Thermal Energy and Power Engineering, North China Institute of Technology, Taiyuan 030051, China);3D Finite Elements Analysis of Piston Assembly in a Gasoline Engine[J];;2004-05
6 Nie Yuhong,Song Yousheng(School of Naval Architecture and Ocean Engineering,Jiangsu University of Science and Technology,Zhenjiang Jiangsu 212003,China);Influence of boundary conditions on temperature distribution in the diesel piston[J];Journal of Jiangsu University of Science and Technology(Natural Science Edition);2009-01
7 WANG Hu, GUI Chang-lin (School of Machinery and Automobile Engineering, Hefei University of Technology, Hefei 230009, China);3-D finite element analysis of heat transfer and thermal deformatiom of the piston set in 4105 diesel engine[J];Journal of Hefei University of Technology(Natural Science);2004-05
8 WANG Qing-sheng,LIU Kun (School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,China);Thermal analysis of piston in high-speed gasoline engines[J];Journal of Hefei University of Technology(Natural Science);2008-06
9 WANG Hu(School of Mechanical and Automobile Engineering,Hefei University of Technology,Hefei 230009,China);Application of Parametric FEM Program in Simulation for Piston Thermal Analysis in Special Conditions[J];Machine Tool & Hydraulics;2005-08
10 LI Bing,HU Yu li,YAO Chang feng (Northwestern Polytechnical University,Xi′an 710072);Finite Element Analysis of Stress and Deformation of Piston under the Action of Thermal and Mechanical Load[J];Mechanical Science and Technology;2002-02
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Lin Baoyang(Chongqing University);A Solid Finite Element Modeling and Analysis of Two-Piece Pistion[J];CHINESE INTERNAL COMBUSTION ENGINE ENGINEERING;1997-01
2 Tong Jingwei; Li Linan; Li Hongqi; Wen Shiqi; Liu Guilian(Tianjin University);3-D Finite Element Analysis of Stress and Deformation of Piston under the Action of Thermal and Mechanical Load[J];TRANSACTIONS OF CSICE;1995-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 QU Xiang,LIAO Lin-qing,JIA Qiu-hong(Chongqing Institute of Automobile,Chongqing Institute of Technology,Chongqing 400050,China);Analysis of Coupling Stress of Piston under Thermal and Mechanical Load[J];Journal of Chongqing Institute of Technology(Natural Science);2008-12
2 TAN Jian song 1, YAN Zhao da 2, LIU Zhen tao 2 (1. Shanxi Vehicle Engine Research Institute, Datong 037036, China; 2. Zhejiang University, Hangzhou 300027, China);The FE Calculation of Nonsymmetrical Structure Piston[J];Vehicle Engine;2001-03
3 SUN Xiu feng, FENG Li yan, XU Feng (Inst.for IC Engine,Dalian Univ.of Tech., Dalian 116023, China);The Progress of Finite Element Analysis on IC Engine Piston Assembly[J];Vehicle Engine;2002-06
4 ZHANG Li, SHEN Zheng-jun, ZHANG Yong(Chongqing University,Chongqing 400030, China Changjang Izumi Piston Industries CO.,LTD, Chongqing,401120,China);Structural Analysis and Evaluation of a Turbo Charged Diesel Engine Piston with an Inner Oscillating-Oil-Cooling Channel[J];Vehicle Engine;2004-06
5 Yang Junwu;3-D FEA And Structural Improvement of D6114 Diesel Engine Piston[J];DESIGN AND MANUFACTURE OF DIESEL ENGINE;2000-01
6 ZHANG Xu-hong 1(1.Constructional Material CO. of Shanxi Province Count and Town Enterprise,Taiyuan 030001,China);FEM Analysis For Loabed Piston of Gasoline Engine[J];Journal of Electric Power;2004-02
7 Zhou Xianhui Ma Jun Li Bomin (North China Institute of Technology, Taiyuan 030051);FINITE ELEMENT ANALYSIS OF A PISTON[J];JOURNAL OF NORTH CHINA INSTITUTE OF TECHNOLOGY;1998-02
8 WANG Hu, GUI Chang-lin (School of Machinery and Automobile Engineering, Hefei University of Technology, Hefei 230009, China);3-D finite element analysis of heat transfer and thermal deformatiom of the piston set in 4105 diesel engine[J];Journal of Hefei University of Technology(Natural Science);2004-05
9 WANG Qing-sheng,LIU Kun (School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,China);Thermal analysis of piston in high-speed gasoline engines[J];Journal of Hefei University of Technology(Natural Science);2008-06
10 GUAN Lei, WANG Jiadao, CHEN Darong of Tribology, Tsinghua University, Beijing 100084, China);3-D finite element numerical simulation of temperature distribution and deformation of piston in micro engines[J];Journal of Jilin University of Technology(Natural Science Edition);2003-04
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Han Jinzhang (China North Vehicle Research institute Beijing 100072);Application of I-DEAS Master Series Software to Analyzing the Stiffness and Strength of Large Casing Components[J];;1997-03
2 FANG Hua, YUAN Zhao cheng, LI Sheng cheng, QIAN Yao yi (Jilin University of Technology, Changchun 130025, China);Gap Element Applied in the Finite Element Analysis for Piston[J];;2000-03
3 HAN Song tao, HAO Zhi yong (School of Mechanical Engineering, Tianjin University, Tianjin 300072, China);The Finite Element Modal Analysis of 4108Q Diesel Engine Connecting Rod[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2000-04
4 GU Zhi-gang, CHEN Yong-xiang (College of Manufacture Science & Engineering, Southwest University of Science & Technology, Mianyang 621010, China);Error Compensation Technology of 3-Axis NC Machine Tools[J];Ordnance Industry Automation;2004-02
5 Zu Jing Zhang Wendong (Taiyuan Institute of Machinery);AN ELECTRONIC CRUSHER GAUGE[J];Acta Armamentarii;1991-01
6 Zu Jing Zhang Wendong (Taiyuan Institute of Mechancial Engineering);A PROGRAMMABLE, REALTIME PROJECTILEBORNE WAVEFORM RECORDER[J];Acta Armamentarii;1991-04
7 Bai Yanping; Zhang Wendong (North China Institute of Technology, Taiyuan, 030051);STUDY ON THE INFORMATION MEASURING PRINCIPLE FOR THE STORED TESTING AND MEASURING SYSTEM[J];Acta Armamentarii;1998-02
8 Liao Ridong Zuo Zhengxing Zou Wensheng (Beijing Institute of Technology, Beijing, 100081);A STUDY ON THE METHOD OF APPLICATION OF BOUNDARY CONDITIONS FOR THE FINITE ELEMENT ANALYSIS OF CYLINDER HEAD SUBJECTED TO MECHAICAL LOADS[J];Acta Armamentarii;2001-01
9 Li Haiyang (National University of Defense Technology) Wu Delong Zhang Yong (Beijing Institute of Astronautic Technology);DYNAMIC ANALYSIS OF MOBILE WEAPON SYSTEMS WITH CLEARANCES: PARTⅠ FRICTIONAL IMPACT MODEL[J];Acta Armamentarii;2002-02
10 Yang Jiahua(Department of Mechanical Engineering);Research on Problems of Finite Element Calculation in the Spindle System[J];Journal of Beijing Polytechnic University;1990-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 LV Cai-qin,SU Tie-xiong,ZHAO Zhen-feng(North University of China,Mechanical and Engineering Institute,Taiyuan 030051,China);Intensity Studying of Desiel Engine Piston Under complex load[J];Vehicle & Power Technology;2009-02
2 LUO Qing-guo,LIU Hong-bin,GONG Zheng-bo,GUI Yong(Department of Mechanical Engineering,Academy of Armored Forces Engineering,Beijing 100072,China);Study on the Fluid-Solid Coupled Heat Transfer of the Diesel Engine Cylinder Head[J];Acta Armamentarii;2008-07
3 LI Jiang-hua, WU Jing(College of Port and Shipping Engineering, Guangdong Communication Polytechnic, Guangzhou 510800, China);Study on the defects analysis and design technology improvement of marine diesel engine piston[J];Ship Engineering;2008-02
4 ZHANG Li, SHEN Zheng-jun, ZHANG Yong(Chongqing University,Chongqing 400030, China Changjang Izumi Piston Industries CO.,LTD, Chongqing,401120,China);Structural Analysis and Evaluation of a Turbo Charged Diesel Engine Piston with an Inner Oscillating-Oil-Cooling Channel[J];Vehicle Engine;2004-06
5 Ji Fenzhu Gao Feng;Analysis of Piston Temperature Field of Air-Cooled Diesel Engine by Using Three-Dimensional Finite Element Method[J];Design and Manufacture of Diesel Engine;2005-03
6 Lv Caiqin, Su Tiexiong;Study on Thermal and Mechanical Loads and Thermal-Mechanical Coupled Load on Diesel Engine Piston[J];Design and Manufacture of Diesel Engine;2008-02
7 Liang Gang1,Chen Zhizhong2,Yang Zhixiang2(1.Shanghai Jiaotong University,Shanghai 200030;2.Shanghai Marine Diesel Engine Research Institute,Shanghai 200090);The New Development of Piston Design Technology for Medium-Speed Diesel Engine[J];Diesel Engine;2007-02
8 YUN Xin-bing,LIU Gui-lin,SONG Bao-yun,FAN Zhi-xin(Continuous Extrusion Engineering Research Center,Dalian Jiaotong University,Dalian 116028,China);Effect of coining roll reduction on continuous extrusion process for wide copper strip[J];Forging & Stamping Technology;2008-05
9 DENG Zhao-xiang12,PAN Fu-sheng1,2,WANG Pan1,2(1.State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030,P.R.China;2.Chongqing Engineering Center of Automotive NVH,Chongqing 400039,P.R.China);Simulation analysis of piston slap of internal combustion engine[J];Journal of Chongqing University;2008-06
10 L Ji-Zu~1 BAI Min-Li~1 SHAO Zhi-Jia~1 ZHOU Jian~2 1. School of Energy and Power Engineering, Dalian University of Technology, Dalian 116023, China; 2. LTD Vehicle Quality Department, Guangzhou Honda Automobile Company,Guangzhou 511338, China;MULTI-DIMENSIONAL TRANSIENT NUMERICAL SIMULATION FOR EXHAUSTED PROCESS OF DIESEL ENGINE[J];Journal of Engineering Thermophysics;2008-11
China Proceedings of conference Full-text Database 1 Hits
1 Li Cheng-ling Chen Shu-xun Chen Jian-jun (Mechanical Engineering College,Guangxi University,Nanning Guangxi);THERMAL ANALYSIS FOR COMPONENTS OF AN ENGINE[A];[C];2008
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 Wu Changhua(Dalian Railway Institute);Application of Microcomputer to Deformation and Stress Calculation of Locomotive Diesel Engines[J];;1991-02
2 He Bingchu Mao Mingzhi (Changsha Railway Institute);Numerical Analysis for 1/2 Piston Model by Use of 3-Dimensional FEM[J];Transactions of Csice;1990-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved