Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Armamentarii》 2003-04
Add to Favorite Get Latest Update

A GEAR PAIR MODEL AND ITS APPLICATION IN THE SOFTWARE ADAMS

Hong Qingquan Cheng Ying (Beijing Institute of Technology, Beijing, 100081)  
To set up the virtual prototype of a gear train system in the dynamic analysis software ADAMS, the torsional vibration model of the gear pair is transformed into an equivalent kinetic model viz. the transmission model. The model includes all the kinetic contents of a torsional vibration model, and can be defined easily and widely applied in ADAMS. Gear train systems built on this transmission model can be used to calculate for their inherent torsion characteristics, frequency characteristics,dynamic response,etc.
【CateGory Index】: TH132.41
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 LIU Hui,ZHANG Xi-qing,XIANG Chang-le(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Dynamic Response Analysis of Gearbox Housing Under Multi-source Dynamic Excitation[J];Acta Armamentarii;2011-02
2 WANG Xiaoqun,SUN Ping,LI Wei Mechanical Engineering School,University of Science and Technology Beijing,Beijing 100083,China;Modeling and torsional vibration simulation of involute spur gears with asymmetric teeth[J];Journal of University of Science and Technology Beijing;2007-12
3 ZHAO Li-juan 1,2,WANG Tian-bo2,LIU Jie1,NING Zuo-jiang3(1.School of Mechanical Engineering and Automation,Northeastern University,Shenyang 110004,China;2.School of Mechanical Engineering, Liaoning Technical University,Fuxin 123000,China;3.Liaoning Provincial Machinery Research Institute Co.,Ltd.,Shenyang 110032,China);Review on dynamics of flexible multibody systems applied in roller milling industry[J];Chinese Journal of Construction Machinery;2006-04
4 Zhang Qingxia, Wang Xinggui, Du Xiuju, Guan Zhenzhen;Study on the Dynamics Simulation of the Planetary Gear Train Based on the Virtual Prototype Technology[J];Journal of Mechanical Transmission;2006-04
5 GAO Hai-long,WU Xiao,LI Zhen-hua,LIU Lu;Study on multi-body dynamics simulation of flexible gears[J];Manufacturing Automation;2009-10
6 WANG Guang-jian,CHU Zhi-gang(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030,China);Dynamic Modeling and Simulation of High-speed Cam with Gear Reducer[J];Journal of Nanjing University of Science and Technology;2012-03
7 Xu Jun-mei,Gou Xiang-feng(College of engineering of Lanzhou Jiaotong university,Lanzhou Gansu 730070,China);Dynamic simulation of meshing force in gear meshing process based on virtual prototyping[J];Mechanical Research & Application;2012-06
8 Yuan Anfu Lu Yang(School of Information and Control,Nanjing University of Information Science & Technology,Nanjing 210044,China);Virtual Prototype Design and Simulation Analysis of the Cutting Machine based on the SolidWorks and ADAMS[J];Journal of Mechanical Transmission;2013-04
9 GAO Hai-long;On multi-body dynamics simulation of flexible gear train[J];Hoisting and Conveying Machinery;2009-12
10 Zhou Yangming 1, Chen Zuobing2(1.Sinoma(Suzhou) Construction Co.,Ltd., Suzhou, China, 215300);Study on the dynamic character of rotary equipment's drive system based on Virtual Prototyping[J];Cement Engineering;2010-02
【Citations】
Chinese Journal Full-text Database 1 Hits
1 LIUXiao -xuetal (SichuanInstituteofLightIndustryand ChemicalTechnology);An approximate method for calculating the dynamic load of gears[J];MACHINE DESIGN;2000-09
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Chao,QIN Wen-jie (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology,Beijing 100081,China);Finite Element Analysis for 3-D Dynamic Contact problem of Gear Tooth[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2004-02
2 SUN Hua-gang1,2,FENG Guang-bin1,CAO Deng-qing2,MAO Xiang-dong1 (1.Ordnance Technical Institute,Shijiazhuang 050000,China;2.School of Astronautics,Harbin Institute of Technology,Harbin 150001,China);Analysis of Gear Crack’s Influence on Mesh Stiffness[J];Vehicle & Power Technology;2010-04
3 ZHAO Guo-feng,FAN Wei-hua,CHEN Qing-wei,HU Wei-li(Department of Automation,Nanjing University of Science and Technology,Nanjing 210094,Jiangsu,China);A Survey on Backlash Nonlinearity[J];Acta Armamentarii;2006-06
4 LI Chang,HAN Xing(School of Mechanical Engineering and Automation,University of Science and Technology Liaoning,Anshan 114051,Liaoning,China);Digital Finite Element Simulation of Gear Box Based on Explicit Dynamics[J];Acta Armamentarii;2009-07
5 HONG Qing-quan,CHENG Ying (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing100081, China);Dynamic Simulation of Multistage Gear Train System in ADAMS[J];Journal of Beijing Institute of Technology;2003-06
6 ZHAO Zi-qiang,ZHANG Chun-lin,CHENG Ai-ming,DU Qiu(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Force Analysis on Internal Parallel Move Gear Transmission with Mulriple Redundant Constrains[J];Transactions of Beijing Institute of Technology;2008-09
7 Li Guixian,Ma Liang and Others (41);A Study on Meshing Rigidness and Dynamic Property of Gear Transmission Used for the Warship[J];SHIP ENGINEERING;2000-05
8 ZHU Cai-chao,LU Bo,XU Xiang-yang,WANG Hai-xia(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030,China);Analysis of coupling characteristic of transmission and structure system of large-power marine gearbox[J];Journal of Ship Mechanics;2011-11
9 BAO Chun-mei,LV Shi-bao,ZHANG Li(School of Mathematics and Software Engineering,Lanzhou Jiaotong University,Lanzhou 730070,China);Dynamic Response of Gear System with Time-varying Under Random Excitation[J];Journal of Chongqing University of Technology(Natural Science);2012-07
10 YIN Shu-tao,JIANG Shu-li,WANG Rui-chao,GE Jing,ZHAO Yan-jing,LU Ben-you(School of Automobile and Traffic Engineering,Jiangsu University,Zhenjiang 212013,China);Design of New Balancing Mechanism for Single Cylinder Diesel Engine[J];Vehicle Engine;2010-02
China Proceedings of conference Full-text Database 6 Hits
1 Xie Haidong , Zhou Zhaoyao, Xia Wei, Shao ming;The vibration frequency response analysis of powder metallurgy helical gear transmission system[A];[C];2005
2 (college of enginerring and technology,shanghai 200336);Dynamic research of a membrane friction coupling[A];[C];2004
3 Wei Liqun~1 Qu Zhihao~2 Chen Hanhui~3 (1.School Materials Science and Engineering,Shanghai Institute of Technology,Shanghai,200235; 2.Shanghai Second Polytechnic University,Shanghai,201290; 3.Special Steel Brach,Baosteel Co.,Ltd.,Shanghai,201900);Viberation Test Analysis of Gear Box for Alloy Bar's Rolling Mill[A];[C];2009
4 YANG You-sheng FENG Jian CHEN Xue-hua (Chongqing Gearbox Co.,Ltd,Chongqing,402263;Chongqing Electronic Profession College,Chongqing 400021);Vibration Control Study on Marine Gearbox Base on Dynamic Characteristic[A];[C];2007
5 Cui Yahui Lui Zhansheng Ye Jianhuai (School of Energy Science and Engineering,Harbin Institute of Technology,150001,China);UNBALANCE RESPONSE OF GEAR-ROTOR SYSTEM WITH NON-LINEAR CLEARANCE[A];[C];2008
6 Lu Ning (school of Mechanical Engineering, Shanghai University of Engineering and Technology, Shanghai 200336, China);The Control for tension of winding mechanism[A];[C];2011
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Chen Yan (AISC Technology Center);The Development of Surface Defect Intelligentialized Identification on Cold Rolled Steel Strip[J];;1998-09
2 Xue Haifeng Xiang Jinwu Zhang Xiaogu (School of Aeronautics Science and Technology, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Coupled helicopter rotor/propulsion/transmission system torsional vibration analytical model and coupled influence investigation[J];Journal of Beijing University of Aeronautics and Astronautics;2004-05
3 Zhang Jianguo Su Duo(Dept.of System Engineering of Engineering Technology,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Reliability of space flexible mechanisms[J];Journal of Beijing University of Aeronautics and Astronautics;2006-01
4 Jiang Libiao Ni Qiang (Dept.of Automotive Engineering,Harbin Institute of Technology,Weihai 264209,China);Parametric design and analysis of front independent suspension of 6×6 off-road vehicle with ADAMS/View[J];Journal of Beijing University of Aeronautics and Astronautics;2008-02
5 WANG Xiuyan, GE Ping, WANG zhenglin, SUN Yikang, FU Jian Information Engineering School, University of Science and Technology Beijing, Beijing 100083, China 2)Beihua University, Jilin 132021, China;PID Decoupling Control Based on the Subsection Liner Model of FGC for Tandem Cold Rolling[J];Journal of University of Science and Technology Beijing;2004-02
6 LIU Hua, WU Bin,HE Anrui, YANG Quan, CHEN ChangkeNational Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing 100083, ChinaXinjiang Zhonghe Co. Ltd., Wulumuqi 830013, China;Finite element analysis of work roll contour influence on aluminum foil profile[J];Journal of University of Science and Technology Beijing;2005-01
7 LOU Yizhi, WANG Xiaoqun, LI Wei Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Dynamics analysis of involute gears with asymmetric teeth[J];Journal of University of Science and Technology Beijing;2005-03
8 HONG Qing-quan,CHENG Ying (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing100081, China);Dynamic Simulation of Multistage Gear Train System in ADAMS[J];Journal of Beijing Institute of Technology;2003-06
9 LIU Hui bo,LI Zhi min,ZHANG Yu jie (Department of Automation and Computer Engineering,UIST Baotou,Baotou 014010,China);The neural network PID controller and simulation to brushless DC motor[J];Journal of Baotou University of Iron and Steel Technology;2002-01
10 (He Xiong,School of Mechanical Engineering,SJTU);The Analysis on Adams Dynamic Simulation Algorithm and Parameters Selection[J];;2005-03
China Proceedings of conference Full-text Database 2 Hits
1 Liu Liu Su Tiansen (Central Iron & Steel Research Institute) (The Chinese Socitey for Metals);DEVELOPMENT OF STEELMAKING TECHNOLOGY IN CHINA[A];[C];2003
2 Zhang Shutang Zhou Jizhi (Central Iron and Steel Research Institute);THE PROSPECT OF INNOVATION IN ROLLING TECHNIQUE[A];[C];2003
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 MA Xing-guo1,2,YANG Wei2,YOU Xiao-mei1,2,CHEN Chun-gang3,ZHANG Fang3(1.Faculty of Mechanical Engineering NEU,Shenyang 110015,China;2.Faculty of Automobile and Communication,Shenyang LIGONG University,Shenyang 110168,China;3.North Heary Industry Group Shenyang Mine Machinely Manufactory Corporation,Shenyang 110027,China);Multi-body dynamical analysis on rigid-flexible coupling for planetary gear system[J];Chinese Journal of Construction Machinery;2009-02
2 ZHAO Li-juan1,LIU Xu-nan1,LU Tie-liang2(1.Mechanical Engineering College,Liaoning Technology University,Fuxin 123000,China;2.North College,Beijing University of Chemical Technology,Sanhe 065201,China);Reliability research of shearer cutting unit based on virtual prototyping technology[J];Journal of Guangxi University(Natural Science Edition);2010-05
3 QU Zhen-sen1,BO Yu-cheng1,WANG Hui-yuan1,SU Gao-feng1,YUAN Jue2(1.School of Mechatronics Engineering,North University of China,Taiyuan 030051,China;2.No.202 Institute of China Ordnance Industry,Xianyang 712099,China);Study on Characteristics of Arm-Type Rammer[J];Journal of North University of China(Natural Science Edition);2012-02
4 HUANG Jianna1,CHEN Haihong2,LIU Baojun3(1.Department of Mechanical Engineering,Henan Polytechnic Institute,Nanyang Henan 473009,China; 2.School of Mechanical Engineering and Automation,Guizhou University,Guiyang Guizhou 550003,China; 3.Henan Costar Group,Nanyang Henan 473004,China);Control System Study and MATLAB Implementation of Electro-magnetic Gears Based on Artificial Neural Network PID[J];Machine Tool & Hydraulics;2012-08
5 WANG Chao,SHAO Pengli (Dept. of Whole Tech. ,China North Vehicle Research Institute,Beijing 100072,China);Finite element dynamics analysis and simulation on gear transmission based on LS_DYNA[J];Computer Aided Engineering;2010-02
6 ZHAO Li-juan,ZHANG Nong-hai,AN Ya-jun(Liaoning technical university,Fuxin,123000,China);Reliability research for planet carrier of shearer working in thin coal seam with iron ore[J];Manufacturing Automation;2008-10
7 WU Yun-xi1,WANG Hong-liang2;The improved design on plastic fine-pitch gear of motor retractor[J];Manufacturing Automation;2010-07
8 YANG Min;Simulation analysis on flexible gear transmission based on SolidWorks and ADAMS[J];Manufacturing Automation;2011-23
9 Zhao Xianfeng1,2 Shi Hongyan1 He lin1,2(1 School of Mechanical Engineering,Guizhou University,Guiyang 550025,China)(2 National Precision Micro &Special Motor Engineering Technology Research Center,Guiyang 550008,China);Research on Dynamic Contact of Micro Gear Meshing Process[J];Journal of Mechanical Transmission;2012-12
10 ZHAO Fu-sheng(Copper Smelter,Jinchuan Group Co.,Ltd,Jinchang 737104,Gansu,China);Design and Plant Practice of 400 t Rotary Anode Furnace[J];Nonferrous Metals(Extractive Metallurgy);2013-02
China Proceedings of conference Full-text Database 1 Hits
1 Hu Niaoqing,Cheng Zhe (College of Mechatronics Engineering and Automation,National Univ.of Defense Technology,Changsha,410073);MODELING AND DETECTION APPROACH ON PITTING DAMAGE FOR PLANETARY GEAR SETS[A];[C];2010
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved