Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Armamentarii》 2004-02
Add to Favorite Get Latest Update

METHOD OF INSPECTION ON THE INTERIOR BALLISTIC PERFORMANCE OF AMMUNITION IN STOCKPILE

Tian Guijun Yuan Yaxiong Zhang Xiaobing (Power Eng. College,Nanjing University of Science and Technology,Nanjing,210094)  
This paper discussed the ways of inspection on the interior ballistic performance of ammunition in stock without the use of standard ammunition or ballistic gun. Based on analysis and study on traditional inspection,a new method of inspection on ammunition in stockpile was presented. The systematic error caused by the artillery itself can be determined with this method independent of either standard ammunition or the ballistic gun by measuring the variation in the inner diameter of the gun barrel before firing. Correcting this error and laying down a procedure to control the secondary error rigidly to a minimum replace the method of daily correction. The paper took a gun howitzer as an object of research and made an analysis and practice in the technical ways and operating process for the method of inspection. The concrete methods of operation were finally given.
【CateGory Index】: TJ410.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 KONG Guo-jie1,ZHANG Pei-lin2,3,QIAN Lin-fang3,WU Feng1(1.Beijing Special Vehicle Research Institute,Beijing 100072,China;2.1st Department,College of Ordnance Engineering,Shijiazhuang 050003,China;3.School of Mechanical Engineering,NUST,Nanjing 210094,China);A New Evaluation Method for Residual Life of Gun[J];Journal of Ballistics;2010-03
2 QI Hong-hai1,2,LIANG Li2,ZHENG Hai-qi1(Department of Guns Engineering,Ordnance Engineering College1,Shijiazhuang 050003,P.R.China;Unit 654262,Haerbin 150003,P.R.China);Research on the Technology of Comprehensive Test Virtual Instrument for Artillery Pipe[J];Science Technology and Engineering;2008-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 GE Jian-zhong1,HUANG Song-qing2,GE Cong3(1.Dept.of Mech.Engn.,Wuhu Institute of Technology,Wuhu 241000,China;2.Elec.Auto.Dept.,Anhui University of Technology,Maanshan 243011,China);Probation into coordinates measuring strategy[J];Journal of Anhui University of Technology and Science(Natural Science);2010-04
2 ZENG Han-ping1,LI Deng-hong2(1.Anhui Changjiang Institute of Metrology,Hefei 230022,China;2.Nanjing University of Technology,Nanjing 210009,China);Studying in the way of measurement for the diving asynchronous motor speed with high accuracy[J];Journal of Anhui Technical College of Water Resources and Hydroelectric Power;2008-03
3 Yu Jian He Guangping(Col.of Mechanical and Electronical Engineering,North China Univ.of Tech.,100144,Beijing,China);Design of Testing and Controlling System of Material Testing Machine Based on Java[J];Journal of North China University of Technology;2010-03
4 XIAO Zheng gang, YANG Dong, YING San jiu, SHI Jie, GAO Yao lin, XU Fu ming (Nanjing University of Science and Technology, Nanjing 210094, China);Experimental Study on Reducing the Pressure Wave of Gun Propelling Charge with High Loading Density[J];Chinese Journal of Explosives & Propellants;2001-01
5 DOU Lei, WENG Chunsheng, JIN Zhiming(Nanjing University of Science and Technology, Nanjing 210094,China);Numerical Simulation of Sensitivity of Grain Fracture[J];Chinese Journal of Explosives & Propellants;2003-02
6 XIAO Zhong-liang~1, WANG Ze-shan~2(1. North China Institute of Technology, Taiyuan030051, China;2. Nanjing University of Science and Technology, Nanjing210094, China);The Understanding and Comprehension of Science and Technology for Propellant[J];Chinese Journal of Explosives & Propellants;2004-03
7 FENG De-cheng~1, WENG Chun-sheng~1, WANG Ji-tong~2(1. College of Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, China; 2. Luzhou North Chemical Industry Co. Ltd, Luzhou 646000, China);Variance Analysis of the Effects of Initial Parameters of Propellant on Maximum Pressure[J];Chinese Journal of Explosives & Propellants;2004-03
8 WANG Jing~(1,2),YUAN Ya-xiong~1 (1.Power Engineer College, NUST, Nanjing 210094,China; 2.Guilin Air Force Academy,Guilin 541003,China);A Method of Charge Ballistics Design Based on Multiple Attributes[J];Chinese Journal of Explosives & Propellants;2005-03
9 WANG Qiong-lin,LIU Shao-wu,YU Hui-fang,LIANG Yong,ZHANG Yuan-bo,LI Li(Xi′an Modern Chemistry Research Institute,Xi′an 710065,China);Preparation and Properties Test of High Performance Modified Single Base Gun Propellant[J];Chinese Journal of Explosives & Propellants;2007-06
10 WANG Qiong-lin,LIU Shao-wu,ZHU Yang-chun,GUO Feng,ZHANG Yuan-bo,WEI Lun(Xi′an Modern Chemistry Research Institute,Xi′an 710065,China);Research on Mutilayer Disc Nitramine Gun Propellant[J];Chinese Journal of Explosives & Propellants;2008-02
China Proceedings of conference Full-text Database 10 Hits
1 Li Lian Zhai Lixia (Tianjin University of Technology,Tianjin,300384);Research on Error Analysis and Data Processing of the Dynamic Track Scale Weighing System[A];[C];2011
2 Li Cunlong,Chen Weimin,Liu Xianming,Lei Xiaohua,Lai Wei,Zeng Haipeng,Wang Fuquan (Key Lab for Opto-electronic Technology and System of Ministry of Education;Chongqing University;Chongqing 400044;China);Influence of Angle Interval on Light Intensity Distribution Measurements of LED Luminaries[A];[C];2010
3 NI Jin-ping,LU Hong-wei,DONG Tao(School of Optoelectronic Engineering,Xi’an Technological University,Xi’an 710032,China);Method to Measure the Firing Dispersion via to the Combined Screens[A];[C];2011
4 SHEN Xianqing1,2, FU Jiacai2, ZHANG Fan, LI Junming (1. Electric Engineering apartment, Shenyang University of industry, Shenyang of china 110023;2. Electric and Information Engineering apartment, Heilongjiang Institute of Science and Technology, Harbin, 1 Tangchang Street, 150027, China;3. Harbin Research Institute of Electrical Instrumentation, Harbin 150040, China ;);The Design of a Single Phase Watt-hour Meter with Long-distanceAutomatic Meter and Reading[A];[C];2008
5 MA Yong-hong,GE Liang-quan,ZHOU Si-chun,CHEN Ming-chi,LI Bo,HU Qiu-min (Chengdu Univisity and Technology,Chengdu of Sichuan Prov.610059,China);The research of the low energy airborneγspectrum[A];[C];2009
6 Li Jun (Tianjin Electronic & Instrumental Laboratory,300210);Ways to Refine the Indication Error of Video-Measurement System[A];[C];2010
7 Zhou Zhiyong,Jiang Hailong,Li Jia (Institute of Electromechanical Equipment, Qingdao Navy Submarine Academe, Qingdao 266071);Research Period Drift Error Characteristics in INS[A];[C];2008
8 Guo Suoli Jiang Ke Tian Biao Liu Jun (The Second Artillery Engineering College Xian 710025 China);Development and Research of Measuring Capacitance and Inductance Based in Experiment Teaching[A];[C];2008
9 Zhu Jianxiong Liu Shenyou Tu Ran Liu Binghai Zhang Yongming (State Key Laboratory of Fire Science University of Science and Technology of China Hefei 230027 China);Dynamic Uncertainty Evaluation for Efficiency of High-pressure Water Pump System[A];[C];2009
10 Zhou Yang Zhao Jun Kong Ming Dong Yingjun (China Jiliang University Hangzhou 310018 China);A Novel And Fast Coaxiality Measuring Device Based On LVDT[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 ZANG Chi-jian, CHEN Jian-ping, SHEN Hong (College of Physics and Electronics Information, Anhui Normal University, Wuhu 241000, China);TECHNOLOGY ABOUT HOW TO REALIZE VI (VIRTUAL INSTRUMENT)CHINESE-CHARACTER PLATFORM[J];Journal of Anhui Normal University(Natural Science);2001-04
2 NING Dian-min~1,YU Gang~2,LI Wen-bin~1,ZHANG Peng~1(1.School of Civil and Transportion Engineering,Anshan University of Science and Technology,Anshan 114044,China;2.Programming & Designing Institute of Anshan,Anshan 114001,China);Discussion on enhancing the settlement observation precision methods[J];Journal of Anshan University of Science and Technology;2006-02
3 ZENG Han-ping1,LI Deng-hong2(1.Anhui Changjiang Institute of Metrology,Hefei 230022,China;2.Nanjing University of Technology,Nanjing 210009,China);Studying in the way of measurement for the diving asynchronous motor speed with high accuracy[J];Journal of Anhui Technical College of Water Resources and Hydroelectric Power;2008-03
4 YANG Rui-ning1,2,AN Zhi-yong1,CAO Wei-guo1,XIANG Yang1,LIU Li-xin1 (1.School of Opto-Electronic Engineering,Changchun University of Science and Technology,Changchun 130022,Jilin,China;2.Zaozhuang University,Zaozhuang 277160,Shandong,China);Research on the Modern Testing System of Exit Pupil Diameter,Distance and Magnification of Optical Sighting Telescope[J];Acta Armamentarii;2008-09
5 HU Daguo1,LI Jian2 1.Real Estate Surveying and Mapping Institute of Guangzhou Municipality,Guangzhou,Guangdong,510030; 2.The Surveying & Designing Institute of Xin jiang Production and Construction Corps,Urumchi,Xinjiang,830002;Development of Surveying Functions with Excel based on VBA[J];Beijing Surveying and Mapping;2008-02
6 GAO Shao-wei Beijing Polytechnic College,Beijing,100042;Practice of Laser Plummet Apparatus Upward Point in Subway Tunnel Project[J];Beijing Surveying and Mapping;2008-02
7 LIU Zhi-mei,DENG Wen-yi,LOU Xiao-ping(School of Photoelectric Information and Telecommunication Engineering,Beijing Information Science and Technology University,Beijing 100192,China);Extraction algorithm of light stripes center in the measurement system of structured light[J];Journal of Beijing Institute of Machinery;2009-01
8 Yu Minglang(School of Industrial Manufacturing,Chengdu University,Chengdu 610106,China)Wei Zhenzhong Sun Junhua(School of Instrument Science and Opto-electronics Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);On-spot camera calibration method based on flexible planar target[J];Journal of Beijing University of Aeronautics and Astronautics;2009-03
9 Wang Wei Yun Chao Sun Kun Wang Yuanyuan(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Accurate tool calibration for robotic conformance grinding system[J];Journal of Beijing University of Aeronautics and Astronautics;2009-06
10 XIAO Ding-guo 1, HE Ping 2, ZHOU Shi-yuan 1, FENG Hong-liang 1 (1.School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing100081, China; 2.Dept. of Applied Mechanics, Beijing Institute of Technology, Beijing100081, China);Shear Modulus Measurement Using Torsional Ultrasonic Pulses[J];Journal of Beijing Institute of Technology;2002-05
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 MA Ji-sheng 1 ,ZHENG Jian 2 ,DENG Hui-yong 1 ( 1. Artillery Engineering Department,Ordnance Engineering College,Shijiazhuang 050003,Hebei,China 2. Scientific Research Department,Ordnance Engineering College,Shijiazhuang 050003,Hebei,China);A Study on Criteria for Barrel Lifetime[J];兵工学报(英文版);2012-03
2 ZHANG Guo-ping;WANG Mao-lin;YANG Dong;ZHU Wen-fang;LIU Yan;Northwest Institute of Mechanical & Electrical Engineering;;Probing on Barrel Life for the Small Caliber Gun[J];Journal of Gun Launch & Control;2013-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved