Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Armamentarii》 2004-06
Add to Favorite Get Latest Update


Han Chengshun Dong Shen Tang Yuyong (College of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin, 150001)  
Optical components of large sized aspheric surface have gained significant importance and indispensability because of their desirable properties. However, efficient and economical manufacturing techniques are still critical problems to meet the demand for precision and quantity. Traditionally 2-axis NC machine was used to manufacture axisymmetric aspheric surface. If a code disc offering accurate readings of the rotation angle is installed on the spindle, non-axisymmetric aspheric surfaces can be processed on it by employing a diamond wheel. The corresponding geometric models for two kind of aspheric surfaces were presented based on curvature analysis. By computer simulation it is verified that the machining approach can be made simple and reliable. According to geometric models the production efficiency can be improved and the equipment input can be reduced so that 3-D machining can be achieved by reforming a 2-axis machine.
【CateGory Index】: TG580.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 6 Hits
1 SHANG Chun-min,ZHANG Dong-mei,YANG Jian-dong,FAN Jing-feng (College of Mechanical and Electrical Engineering,Changchun University of Science and Technology,Changchun 130022,Jilin,China);Research on Modeling and Experiment of Ellipsoidal Surface Lapping Tool Using Bend Forming Method[J];Acta Armamentarii;2009-01
2 SHANG Chun-min,ZHANG Dong-mei,YANG Jian-dong,FAN Jing-feng ( Science and Technology Development Center, Changchun University of Science and Technology, Changchun 130022, China );Equidistance-curve error analysis of lapping tool in aspherical surface lapping by bending and forming method[J];Opto-Electronic Engineering;2006-06
3 WANG Yuan-sheng,LU Gui-ying,WANG Cun-yang (School of Mechanical and Electrical Engineering,China University of Geoscience,Wuhan 430074,China);Correction of profiling method to process concave conic aspheric elements[J];Optical Technique;2007-03
4 Shang Chunmin~1,Wang Xuejing~2,Zhang Dongmei~1,Yang Jiandong~1 (~1Science and Technology Development Center of Changchun University of Science and Technology,Changchun 130022;~2Jilin Chemical Fibre Group Jinma Light Spinning Engineering Design Co.Ltd.,Jilin 132115);Research on High Speed Lapping of Hyperboloid Parts Using the Bending Formation Method[J];Mechanical Science and Technology;2006-10
5 CHEN Qin-fang,XU Chang-jie,WANG Qing-song(Xi′an Technological University,Xi′an 710032,China);Alignment for optical axis of parabolic mirror[J];Journal of Applied Optics;2008-02
6 ZHANG Kun-ling1,2,LIN Bin1,WANG Xiao-feng1,3(1.School of Mechanical Engineering,Tianjin University,Tianjin 300072,China;2.Xuchang Technology Economics School,Xuchang Henan 461500,China);The Status and Developing Tendency of the Aspheric Optic Part Machining[J];Modular Machine Tool & Automatic Manufacturing Technique;2007-05
Chinese Journal Full-text Database 1 Hits
1 Chen Mingjun Dong Shen Zhang Feihu Liang Yingchun (Harbin Institute of Technology, Harbin, 150001);WHEEL TRUING TECHNIQUE IN ULTRA-PRECISION ASPHERIC GRINDING SYSTEM[J];Acta Armamentarii;2002-02
Chinese Journal Full-text Database 10 Hits
1 Bao Qingshan Tang Yuyong Wang Yuntao;Several Means go Solve the Converse Problem about Movement of Engineering Geometry[J];Journal of Changzhou Institute of Technology;1999-04
2 WANG Yong qing, FAN Jin, LIN Le zhong, LU Jie chi ( School of Mech. Eng., Dalian Univ. of Technol., Dalian 116024, China );Analysis of cutter interference on milling loxodrome grooves on rocket nozzle[J];Journal of Dalian University of Technology;2001-05
3 QU Kun,ZHANG Yue(School of Mathematics and Physics,Dalian Jiaotong University,Dalian 116028,China);Models of Virtual Manufacturing Ball-Nosed Cylindrical Cutter with Novel Cutting Edge Design[J];Journal of Dalian Railway Institute;2005-04
4 QU Kun,ZHANG Yue(School Mathematics and Physics,Dalian Jiaotong University,Dalian 116028,China);Essential Models of Novel Cutting Edge Design for Ball-Nosed Concave Arc Cutter[J];Journal of Dalian Jiaotong University;2008-02
5 ;Geometric Model of Twist Rotor of NC Machining Roots Blower[J];Compressor,Blower & Fan Technology;2008-02
6 SONG Zuo-zhong,ZHANG Chuan-fang (Department of Mathematics and Mechanics,Heilongjiang Institute of Science and Technology,Harbin 150027,China);Slant equidistant surface of tangent curve and its property[J];Journal of Liaoning Technical University;2004-05
7 YE Cai-fei(Economy Management Department, Guangdong Songshan Vocational and Tech nical College, Shaoguan 512126);Point Classifying and Digital Controlled Curved-surface Planning[J];Journal of Guangzhou Maritime College;2003-02
8 Ren Bingyin et al;Instructions About 2-axis NC Machining of Ball-end Milling Cutters[J];Tool Engineering;2001-05
9 Xie Huakun Duan Rongan Zhang Zhaolong et al;Controllable Point-conjugate-meshing Kinematic-geometric Metrology and Its Application on Accuracy Measurement of Bevel Gears[J];Tool Engineering;2002-01
10 Han Chengshun Tang Yuyong Dong Shen;General Solution Model of Non-NC Machining of Special Revolving Milling Cutters[J];Tool Engineering;2002-02
Chinese Journal Full-text Database 10 Hits
1 CHENG Wei-bin~,YE Xiao-yan (College of Electronic Engineering , Xi’an Shiyou University , Xi’an 710065, China);Rapid Computational Method of Velocity Measurement with High Accuracy in Closed Loop Control System[J];Chinese Journal of Sensors and Actuators;2006-04
2 OU Jin-ping; GUAN Xin-chun(Harbin University of Civil Engineering and Architecture, Harbin 150090);Experimental study of magnetorheological damper performance[J];EARTHQUAKE ENGINEERING AND ENGINEERING VIBRATION;1999-04
3 Ou Jingping Guan Xinchun (School of Building Engineering,Harbin University of Architecture and Civil Engineering,Harbin,150008);MAGNETORHEOLOGICAL FLUID DAMPERS AND THEIR PROPERTIES[J];EARTHQUAKE ENGINEERING AND ENGINEERING VIBRATION;1998-03
4 Cao Guohui et al.;Study on compounded technology of mould box polishing[J];Electromachining & Mould;2001-05
5 Yang Shiqing Wang Haocai Zhang Wanli Gong Jie(University of Electronic Science and Technology of China,Chengdu 610054);THE STUDY ON MATERIALS,CHARACTERIZATION AND DEVICES OF MAGNETORHEOLOGICAL FLUIDS[J];EXPLORATION OF NATURE;1998-03
6 GONG Qing - Shou, NING Li - wei, HUANG Ju - sheng, WU An-ru, LI Xiao-hui (Dept.of Mech. and Elect . Eng.,Hunan Institute of Engineering,Xiangtan 411101,China);ELID Precise Mirror Molar Technique and Its Application[J];Journal of Hunan Institute of Engineering;2003-03
7 WANG Quan dou, YU Jing chi, ZHANG Xue jun, ZHANG Zhong yu (The State Key Laboratory of Applied Optics,Changchun Institute of Optics and Fine Mechanics,Chinese Academy of Sciences, Changchun 130022, China);Solution for Best Fitting Spherical Curvature Radius and Asphericity of Off Axis Aspherics[J];Opto-electronic Engineering;2000-03
8 CHEN Yao-long (Loh Optikmaschinen AG, Wetzlar , Germany, D-35578);Manufacturing technologies for aspherical optics[J];Opto-electronic Engineering;2002-S1
9 SHANG Chun-min,YANG Jian-dong,ZHANG Dong-mei,ZHANG Xin-ming ( Science and Technology Development Center, Changchun University of Science and Technology, Changchun 130022, China );Effecting of inclining error in installing to the optical aspheric surface work-piece in the lapping[J];Opto-Electronic Engineering;2006-04
10 Wu Zequn Liu Yajun Tang Yong et al;Effect of Tool Flank Wear on Cutting Force and Surface Roughness[J];Tool Engineering;2005-05
【Secondary References】
Chinese Journal Full-text Database 5 Hits
1 YU Xiuying,WANG Jiang,JIANG Yong,ZHANG Guojuan(Southwest Institute of Technical Physics,Chengdu 610041,China);Aspheric Collimating and Shaping Element Design for Diode Laser Range Finders[J];Electronics Optics & Control;2009-05
2 CHEN Wei,ZHAO Fu (College of Mechanical Engineering,Beijing Technology and Business University,Beijing 100048,China);STUDY ON APPLICATION OF BP NEURAL NETWORK TO REVERSE DESIGN OF ASPHERIC'S SURFACE POLYNOMIAL[J];Journal of Beijing Technology and Business University(Natural Science Edition);2009-04
3 LI Chi-juan,SUN Chang-feng,MENG Fan-bo,MENG Xiao-long(North China Research Institute of Electro-optics,Bejing 100015,China);Study on single point diamond turning technology[J];Laser & Infrared;2009-12
4 ZHANG Yang,ZHANG Feng-sheng(College of Mechanical & Electrical Engineering,Qingdao University,Qingdao 266071 China);Analysis and Improvement of Light Path Calculating Methods for Aspheric Optical System[J];Journal of Qingdao University(Natural Science Edition);2009-01
5 YANG Qing-quan,GUO Yin-biao,LIU Wei-hua,XIE Shu-tong(School of Physics and Mechanical & Electrical Engineering,Xiamen University,Xiamen 361005,China);Design and Implementation on the High Speed Turning System of Aspherics[J];Journal of Xiamen University(Natural Science);2009-05
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 CHEN Mingjun(Harbin Institute of Technology,Harbin,China) DONG Shen ZHANG Feihu;Development of Ultra-precision Optical Aspheric Grinding System[J];CHINA MECHANICAL ENGINEERING;2000-08
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved