Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Beijing Polytechnic University》 1990-02
Add to Favorite Get Latest Update

Comparision Between Different Calculating Methods for Two-point Straight Side Press Frame Model

Lin Daosheng(Department of Mechanical Engineering)  
The displacement and stress of each part in the two -ponit straight side press frame model are obtained by means of two-dimensional and three-dimensional finite element methods. The comparision between the results with these methods and those with the usual method of mechanics of materials shows that these methods are much better.
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 10 Hits
1 Li Linna1 Jiang Bin2(1、2.Changchun Institute of Technology,Changchun 130021,Jilin,China);The Study of Mechanical Press Intelligent Control System[J];Journal of Anshun University;2011-05
2 Zhao Hong (Department of Mechanical and Electronical Engineering, Beijing University of Petroleum, Beijing,102249) Zhao Shengdun Zhou Mingyong Luo Chuangang Lin Tingqi (Department of Mechanical and Electronical Engineering, Xi'an Jiaotong University);SLIDE POSITION CONTROL IN THE MECHANICAL PRESS[J];Acta Armamentarii;2004-02
3 Lin Daosheng( Department of Mechanical Engineering );Discussion on the Calculation of Simple Beams in Some Finite Element Method Books[J];Journal of Beijing Polytechnic University;1991-03
4 Liu Fa-yan;The Solution to the System of Equation of Sixunknowns And the Second Power with A Single-Factor Optimum Seeking Mtehod[J];;1994-Z2
5 ZHANG Lan-jun(Hefei Duanya Group,Hefei 230601,China);Determination of the Main Motor Power and Flywheel Moment of Inertia at Crankshaft Press[J];Group Technology & Production Modernization;2008-04
6 LIANG Gang,YAN Wen(Guangxi Wuzhou Xinhua Battery Co.,Ltd. , Wuzhou ,Guangxi 543002,China);The application of slide-crank mechanism in battery equipment[J];Battery Bimonthly;2002-02
7 Hang Zhibin;Studying on the Structual Feature of the positive Clutch of a Rotating Key Type and practicability to Increase Its Braking Angle[J];;1990-03
8 Lu Wenqi Hu Yuwen Huang Wenxin Du Xuyang(Aero-Power Sci-Tech Center Nanjing University of Aeronautics and Astronautics Nanjing 210016 China);Analysis on Capacitor Energy Storage Parameters of Servo Press Dynamic System of PMSM With Heavy Load[J];Transactions of China Electrotechnical Society;2010-10
9 Lu Wenqi Hu Yuwen Liang Jiaoyan(Nanjing University of Aeronautics and Astronautics Nanjing 210016 China);Analysis of Drive Performance of Permanent Magnet AC Servo System for Servo Press[J];Transactions of China Electrotechnical Society;2011-04
10 ZHOU Zhi-hong,LI Xiao,SUN Chang-sheng(School of Civil and Environment Engineering,University of Science and Technology Beijing,Beijing 100083,China);Crankshaft flexibility analysis of the crank press based on ANSYS[J];Forging & Stamping Technology;2007-05
China Proceedings of conference Full-text Database 1 Hits
1 RUAN Wei-ping~1,HU Jian-guo~(2,3),SUN You-song~3 (1.Guangdong Metal Forming Machine Works Co.,Ltd.,Foshan Guangdong 528300,China; 2.Faculty of Material and Energy Engineering,Guangdong University of Technology, Guangzhou 510090,China 3.Department of Mechanical and Electrical Engineering,Shunde Polytechnic, Guangdong 528333,China);Analysis of Transmission Plans of Servo Mechanical Presses[A];[C];2013
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved