Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
Add to Favorite Get Latest Update

Research on Identification of Interface Parameter of Two Joint's Planes

Yang Jiahua, Wu Liangsheng (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083)  
Based on frequency response measurements with swept sine, complex model analysis and optimum design method, a new method is presented for idetifying interface behavior parameters. It can find out the stiffness and linear viscous damping coefficient between two Joint's planes and be applied in identifying structural interface parameter successfully.
【Fund】: 国家“863”高技术发展资助项目!(9842-013)
【CateGory Index】: TP391.7
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 3 Hits
1 YOU Jinmin,CHEN Tianning (School of Mechanical Engineering, Xi′an Jiaotong University,Xi′an 710049,China);Parameters Identification for Joint Surfaces of Cantilever Beam[J];Journal of Xi'an Jiaotong University;2008-11
2 Wu Liang-sheng1,Dong Jin-cheng1,Zhou Da-shuai1,2(1 Beijing University of Technology,Beijing 100022,CHN;2 Jiamusi University,Jiamusi 154007,Heilongjiang,CHN);Experimental research on mechanical properties of metallurgical powder material[J];Modern Manufacturing Engineering;2008-07
3 QU Chongnian,WU Liangsheng,XIAO Yichuan,ZHANG Shihai (College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,CHN);Summary of guideway technology research on machine tools[J];Manufacturing Technology & Machine Tool;2012-01
Chinese Journal Full-text Database 10 Hits
1 Liu Shi′an(刘世安), Lin Shiming(林世鸣), Kang Xuejun(康学军), Cheng Peng(程 澎), Lu Jianzu(陆建祖), Wang Qiming(王启明)(National Key Laboratory of Integration Opto\|electronic Technology, Institute of Semiconductors, The Chinese Academy of Sciences, B;Numerical Analysis of Steady Current and Temperature Distributions and Characteristics of Transverse Mode in VCSEL[J];CHINESE JOURNAL OF SEMICONDUCTORS;1999-11
2 Ren Qilong; Zhang Ying(College of Eng., North China Univ. of Tech., 100041, Beijing, China);Analysis of Modality and Starting-Braking Process of Rectlinear Vibrating Screen[J];Journal of North China University of Technology;1996-01
3 Yin Jiying (College of Eng., North China Univ. of Tech., 100041, Beijing, China);A Fuzzy Optimization Technique for Defining Mass of Vibrating Body of Vibra Feeder or Vibrosieve[J];JOURNAL OF NORTH CHINA UNIVERSITY OF TECHNOLOGY;1998-01
4 Xu Xiangyang;Fang Lipin;Wu Hong(Harbin Institute of Technology,Harbin 150001)(Harbin First Machinery Plant Harbin 150056)(Heilongjiang Province Water Conservancy and Hydro Electricity Design,Survey and Research Institute);Static And Dynamic FEM Analysis Of The Integral Hoisting Stand For A Tracked Vehicle Powertrain Cabin[J];;1996-04
5 Zhong Zaimin; Xiang Changle (School of Vechicular Engineering, Beijing Institute of Technology. Beijing 100081 )Wu Yingshi (Henan Qinghua Machinery Works, Xuchang 461101 );Application of Symbolic Method on the Calculation of Vehicular Torsion Vibration Problem[J];;1998-04
6 WANG Zhao-lu, WANG Zhi-gang, GUO Shu-biao China North Vehicle Research Institute, Beijing 100072, China;The Project of Static and Dynamic Torque—calibration Laboratory Construction Technology[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2004-01
7 YANG Jia-hua, GUAN Hua, GUO Ning-jun (College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China;College of Mechanical Engineering, Beijing University of Science and Technology, Beijing 100083, China;Beiren Printing Machinery Holdings Limited Co., Beijing 100022, China);The Finite Element Analysis About the Vibration of Printing Presses[J];Journal of Beijing University of Technology;2006-06
8 ZHANG Hou-jiang;WANG Chao-zhi;SU Juan.School of Technology,Beijing Forestry University,100083,P.R.China.;Influences of support styles on MOE determination of lumber with transverse vibration.[J];Journal of Beijing Forestry University;2009-03
9 LIU Zhen-gang(Maintenance Center,Benxi Steel,Benxi,Liaoning,117000,China);The Vibration of Unit B15—90/39 FOR Bengang Power Plant and Its Diagnosis[J];Journal of Liaoning Institute of Science and Technology;2009-01
10 PENG Chang-xian(Northwest Institute of Nuclear Technology,Xi'an 710024,Shaanxi,China);Application of sound-vibration coupling analysis in shock wave measurement[J];Explosion and Shock Waves;2008-05
China Proceedings of conference Full-text Database 3 Hits
1 Ye Rong-xue~1,Sun Wei~1,Zhang Ai-ping~1,Xu Yong-sheng~2,Sun Zhen-tao~3 (1、Northeast China Electric University,Jilin 132012;2.CDT-HLJ corporation,Harbin 150001,3.CDT-Qitaihe power, Qitaihe 154600);Variation of Sliding Support Oil Layer Produce an Effect on Stability of Rotor[A];[C];2011
2 ;1TY-690/5.3压缩机振动故障分析[A];[C];2011
3 HUANG Gao-wen (Nanjing Research Institute of Electronics Technology, Nanjing 210013, China);Optimization and Digitally Integrated Design of Some High-Mobility Radar Structures[A];[C];2008
Chinese Journal Full-text Database 10 Hits
1 CHEN Ya-ying , ZHU Yu (Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084,China);Research and Prospect on Ultra Precision Table System Equipped with Electrorheological Fluid Units[J];Semiconductor Technology;2005-03
2 DONG Xiao-rui,YANG Shi-wen(School of Mechatronic Engineering,North University of China,Taiyuan 030051, Shanxi,China);Research on Modal Measurement Method of Complicated Structure[J];Acta Armamentarii;2008-04
3 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
4 Chen Weifu;Sun Jianguang; Fan Jinwei; Song Guorong; Wu Liangsheng (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing, 100022 );Research on the Application of "Modal Force Method" Technique in Analyzing Dynamics Behavior of Machine Tools Structure System[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;2000-01
5 PENG Zhaoyang,LIU Xiaoping(Automation School, Beijing University of Posts and Telecommunications, Beijing 100876, China);A Fuzzy Method of Identifying Joint Parameters of Mechanical Structure[J];Journal of Beijing University of Posts and Telecommunications;2003-03
6 Xi Zhengping, Tang Huiping, Zhu Jilei, Zhang Jian (Northwest Institute for Nonferrous Metal Research, Xi'an 710016, China);Application of Porous Metal in Fields of Energy Source and Environment Protection[J];Rare Metal Materials and Engineering;2006-S2
7 Li Songsheng,Yang Liuxin,Wang Binghua;Dynamics Characteristic Analysis of High Speed Electric Spindle Shaft Rotors[J];Bearing;2002-02
8 ZHANG Yao-man1,LIU Chun-shi2,XIE Zhi-kun1,LIU Yong-xian1 (1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China;2.Shenyang Machine Tool(Group) Co.Ltd.,Shenyang 110041,China.);Dynamic Performances Analysis of NC Machine Tool Considering Linear Rolling Guideway[J];Journal of Northeastern University(Natural Science);2007-11
9 Tang Xiujin, Yuan Jingxia (Dept. of Engineering Mechanics. D. I. T.) (Dept. of Mechanical Engineering, D.I.T.);The Application of Time Series Analysis and Computer Simulation for Parameter Identification of Structural System[J];;1984-02
10 Guo Ce~1 Sun Qinghong~2(~1College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China)(~2Department of Mechanical Engineering, Southeast University, Nanjing 210096, China);Analysis of thermal characteristics and thermal deformation of high-speed spindle system in NC precision lathe[J];Journal of Southeast University (Natural Science Edition);2005-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 GUO Tie-neng,YU Xue-li,LI Fu-ping,CAI Li-gang,GUO Dong-liang(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,China);Modeling Study of the CNC Heavy-duty Gantry Machine Coupling With the Characteristics of the Joint Surfaces[J];Journal of Beijing University of Technology;2013-03
2 QU Chong-nian,WU Liang-sheng,MA Jian-feng,ZHANG Shi-hai,XIAO Yi-chuan,XIA Qun(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,China);Research on Dynamic Stiffness of Porous Oily Media Interfaces Based on Fractal Theory[J];Journal of Beijing University of Technology;2013-07
3 Guo Haiyang;Guo Zhongda;Jiao Lulu;Optoelectronic Engineering College,Xi'an Technological University;;Based on the aspheric testing magnetic micro gap control technology research[J];Foreign Electronic Measurement Technology;2014-01
4 WANG Bao-yuan,DONG Wen-xiang,SHAO Xiao-jun(Northwest Institute of Mechanical and Electrical Engineering,Xianyang 712099,Shaanxi,China);Review and Prospect of the Research on the Gun Structure Joint Surfaces in Mechanical Model(Ⅰ)[J];Journal of Gun Launch & Control;2011-01
5 HU Yujin LI Jun LI Li(School of Mechanical Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074);A Technique for the Dynamic Modeling of Plane Joint[J];Computer & Digital Engineering;2012-06
6 Zhao Houji,Liu Hougen,Wang Yuqi,Zhu Xiaodong;Dynamic Analysis of a Supercharger Drive Spindle based on ANSYS[J];Journal of Mechanical Transmission;2009-03
7 MA Jun,SHEN Yang,CHEN Yong-jie(Huazhong University of Science And Technology,Hubei Wuhan,430074,China);The Modal Analysis of The Slotting Cutter Based on Equivalent Models wth Virtual Materials[J];Manufacture Information Engineering of China;2011-21
8 JI Xian-yu;SONG Xuan-min;ZHANG Jing;Institute of Mining Technology,Taiyuan University of Technology;;Jincheng Mining Area 15~# Coal Stent Type Selection[J];Coal Technology;2014-09
9 ZHENG Fu-xiang;FAN Guo-yong;GUO La-feng;;Structure optimal design for guideway of special shape internal surface processing device based on iSight[J];Manufacturing Automation;2014-24
10 Mi Jie;Yang Qingdong;Zheng Xiao;Mechanical & Electrical Engineering school,Beijing Information Science & Technology University;;Research on Dynamics Characteristics of High- precision Vertical Grinder Based on Joints[J];Machine Design & Research;2015-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved