Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Beijing Polytechnic University》 2001-04
Add to Favorite Get Latest Update

Analysis of the Dynamical Characteristics of Machine Tool's Small Pillar Model

HE Yin-zhi, CHEN Wei-fu, FAN Yin-long, MA Chun-min ( College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022, China )  
The dynamic characteristics of machine tool's small pillar model are analyzed by the experimental modal analysis method and finite element analysis method. The innate frequency of every period and its corresponding vibration mode of the model are calculated accurately through the combination of the two methods. The modeling error of the finite element analysis method of the model is successfully controlled less than 1.7%, so it can offer a kind of effective analysis means for the finite element modeling of the whole machine including the characteristics of complicated faying face.
【CateGory Index】: TG502.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 6 Hits
1 WANG Xue-lin,XU Min,HU Yu-jin (School of Mechanical Science & Engineering,Huazhong University of Science & Technology,Wuhan 430074,China);Finite Element Analysis of the Modal of Machine Tool[J];Machine Tool & Hydraulics;2005-02
2 XU Hongyu,HOU Zhonghua,XIAO Qidan(Architechtural Engineering College,Henan University of Science and Technology,Luoyang Henan 471003,China);Modal Analysis of CNC Mill Machine[J];Machine Tool & Hydraulics;2009-07
3 YANG RuPing et al.;Analysis to the Test Mode of the Telescopic Boom of the Rock Drilling Rig[J];Mining & Processing Equipment;2006-02
4 LIU Gang-Tian~a,CAO Hui-Min~b,CUI Feng-Kui~b(a.Art & Design School;b.Mechatronics Engineering School,Henan University of Science & Technology,Luoyang 471003,China);Modal Analysis and Optimization of Small Vehicle Cab[J];Journal of Henan University of Science & Technology(Natural Science);2012-01
5 NING Huai-ming,YUAN Dong(Department of Architecture Engineering,Luoyang College of Technology,Luoyang 471023,China);Modal Testing Analysis of Telescopic Arm of a Rock Drill[J];Oil Field Equipment;2007-08
6 Li Jie,Jian Xing-dong,Shi Qing-chun(College of Engineering,Nanjing Agricultural University,Nanjing 210031,CHN);Structural dynamic behaviors analysis and optimization-design of a machine tool's vertical pole[J];Modern Manufacturing Engineering;2007-09
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Chen Weifu;Sun Jianguang; Fan Jinwei; Song Guorong; Wu Liangsheng (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing, 100022 );Research on the Application of "Modal Force Method" Technique in Analyzing Dynamics Behavior of Machine Tools Structure System[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;2000-01
2 Chen Weifu, et al(5);Optimum Identification Method to Predicate Interface Characteristic of Mechanical Structure System[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1998-09
【Co-citations】
Chinese Journal Full-text Database 8 Hits
1 Chen Weifu;Sun Jianguang; Fan Jinwei; Song Guorong; Wu Liangsheng (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing, 100022 );Research on the Application of "Modal Force Method" Technique in Analyzing Dynamics Behavior of Machine Tools Structure System[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;2000-01
2 Xing Tongkun; Ma Chunmin; Chen Weifu (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022 );On the Solution of Complex Linear Equations in the Modal Force Analysis on the Main Structure of Speed Machine Tool[J];Journal of Beijing Polytechnic University;2000-S1
3 HUANG Hong-wu, ZHAO Xiao-qing, MI Hai-qing,HE Bing (State Engineering Research Center for High Efficiency Grinding and Sharpening Technology, Hunan Univ, Changsha, Hunan 410082, China);The Whole Machine Modeling and Mode Analysis of Super-high Speed Surface Grinder Based on FEM[J];Journal of Hunan University (Natural Science);2005-04
4 WANG Lielong1,2,WU Xiuhai2(1.Dep.of Mechanical and Electrical Engineering,Chizhou Teachers College,Chizhou Anhui 247000,China;2.Dep.of Mechanical Engineering,Southeast University,Nanjing 210096,China);The Influence Additional Mass on Dynamic Characteristic of Machine Tool Structure[J];Machine Tool & Hydraulics;2007-03
5 CHEN Xin(Southeast University,Nanjing,China) SUN Qinghong MAO Haijun CHEN Nan;Modeling and Correcting FEM with Contact Element for the Combined Surfaces of Grinder Bolts[J];China Mechanical Engineering;2001-05
6 Yie Weiqiang Yu Xianhai Yu Jianxiang(21);Research for contact rigidity of marine ME's base gasket[J];CHINA SHIPREPAIR;2000-04
7 ;Study on the Dynamic-displacement Display Technology in Complex Mode Space by Solid Model of Machine Tool[J];Manufacturing Technology & Machine Tool;2003-09
8 XIONG Wanli,ZHONG Guofu,JI Zonghui (National Research Center for High Efficiency Grinding,Hunan University,Changsha 410082,CHN);Review on the Development of High Speed Precision Machine Tool Dynamics[J];Manufacturing Technology & Machine Tool;2009-09
China Proceedings of conference Full-text Database 1 Hits
1 Zhu Pingyu Jiang Lingli Bin Guangfu (Hunan Province Key Lab of Health Maintenance for Mechanical Equipment,Hunan University of Science and Technology,Xiangtan Hunan 411201,China;Experimental Research on the Dynamic Characteristic of Super-high Speed Plane Grinder[A];[C];2007
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 WANG Dan,LI Qiang (College of Mechanical, Electronic and Control Engineering, Northern Jiaotong University, Beijing 100044,China);Study on Modal Analysis of Steel Structure of High-Speed Passenger Car Body[J];Journal of Northern Jiaotong University;2001-04
2 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
3 Huang Xudong; Fei Renyuan; Yang Jiahua (Department of Mechanical Engineering, Beijing Polytechnic University, 100022);Experimental Research of the Dynamic Behavior of Spindle Assembly[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1994-03
4 LI Ming,YANG Qing-dong(Department of Mechanical Engineering,Beijing Institute of Machinery,Beijing 100085,China);High-speed dynamic analysis of the five-axis CNC milling machine SKY12160[J];Journal of Beijing Institute of Machinery;2007-04
5 LIU Jianhe,YANG Jiandong (Development Center of Science and Technology of Changchun University of Science and Technology,Changchun 130022);The Study of Lapping Trace by Graphic Transform on Double-side Lapping through a Planet mechanism[J];Journal of Changchun Institute of Optics and Fine Mechanics;2002-02
6 TONG Zhi-yi ( The 45th Institute of Electronics, Ministry of II, Pingliang Gansu 744000, China);The Present Situation of CMP Equipment Market and Technology[J];Equipment For Electronic Products Manufacturing;2000-04
7 Di Shichun;Overseas' newly research and development of WEDM[J];Electromachining & Mould;2003-03
8 Lin Jiahao;Optimum Design of Structures with Specified Non-Frequency-Band[J];;1981-01
9 CHENG Geng dong ( State Key Lab. of Struct. Anal. for Ind. Equip., Dalian Univ. of Technol., Dalian 116024, China );On singular optima of structural topology optimization of trusses[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;2000-04
10 Cheng Gengdong;Zhang Dongxu(Research Institute of Engineering Mechanics,DUT);Topological optimization of plane elastic continuum with stress constraints[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;1995-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 LI Jian-feng FEI Ren-yuan LIU De-zhong WU Guang-zhong GUAN Chang-le YANG Xiao-yong (Advanced Manufacturing Technology-The Key Laboratory of Beijing Municipality,College of Mechanical Engineering and Applied Electronical Technology,Beijing University of Technology,Beijing 100022,China);Development of High-Frequency and Micro-Amplitude Vibration Based Micro-operation Manipulator Experimental System[J];Journal of Beijing University of Technology;2008-03
2 WU Liang-sheng~1 LIU Qing-long~1 ZHOU Da-shuai~(1,2) LUO Ji-cheng~1 1.College of Mechanical Engineering and Applied Electronics Technology,Beijing Univeristy of Technology,Beijing 100022,China; 2.Mechanical Engineering College,Jiamusi University,Jiamusi 154007,Heilongjiang,China;Structure Modified and Force Optimized Under the Dynamic Analysis of Tablet-machine[J];Journal of Beijing University of Technology;2008-03
3 LI Ming,YANG Qing-dong(Department of Mechanical Engineering,Beijing Institute of Machinery,Beijing 100085,China);High-speed dynamic analysis of the five-axis CNC milling machine SKY12160[J];Journal of Beijing Institute of Machinery;2007-04
4 ZHANG Yong-jian1,PAN Yi1,MAO Zhong-wu2,DONG Qiang2,BAO Xuan-ting1(1.Changshu Institute of Technology,Changshu 215500,China;2.Changshu Great Wall Bearing Co.,Ltd.,Changshu 215500,China);Digital Design of Inverted Vertical NC Lathe for Bearing Rings[J];Bearing;2010-04
5 Yang Lei, Zhang Tianli, Jiang Chengbao(School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191);Calculation and Experimental Research of Axial Resonant Frequency of Giant Magnetostrictive Actuator[J];Acta Aeronautica Et Astronautica Sinica;2008-05
6 YUAN Songmei,LIN Jijie,LIU Qiang(School of Mechanical Engineering & Automation,Beihang University,Beijing 100083,China);Finite Element Analysis of Machine Tool as a Whole[J];Machine Tool & Hydraulics;2008-04
7 HUANG Jianjian,MA Ping,CHEN Aimin,ZHANG Bo(Guangdong University of Technology,Guangzhou Guangdong 510006,China);The Comparative Analysis of Computational Mode and Experimental Mode of the CNC Table Based on PolyMAX Method[J];Machine Tool & Hydraulics;2010-23
8 WANG Yanzhong1,LV Xiaoyu1,SUN Hongmei1,LIU Qiang1,GAO Qi2,SHEN Huahong2,WANG Shihui2(1.School of Mechanical Engineering & Automation,Beihang University,Beijing 100191,China;2.BMEI Co.,Ltd,Beijing 100027,China);Optimal Design for the Bed of High-speed Vertical Machining Center Based on ABAQUS[J];Machine Tool & Hydraulics;2011-05
9 FANG Ruixiang,HUANG Xiaodiao,HONG Rongjing(College of Mechanical and Power Engineering,Nanjing University of Technology,Nanjing Jiangsu 210009,China);Dynamic Performance Analysis of High-precision Forming CNC Milling Machine Tool[J];Machine Tool & Hydraulics;2011-11
10 FANG Mingjie1,ZHANG Ningning2,ZHANG Gongxue2,LI Ning1(1.Ningxia Zhongwei Dahe Machine Tool Co.,Ltd.,Zhongwei Ningxia 755000,China; 2.Institute of Electrical and Mechanical Engineering,Shaanxi University of Science and Technology,Xi'an Shaanxi 710021,China);Dynamic Analysis for DVG 850 High-speed Machining Center[J];Machine Tool & Hydraulics;2011-23
China Proceedings of conference Full-text Database 1 Hits
1 Li Yan~1,Wang Shufeng~2,Liu Jianyong~1,Cai Yanhua~2 (1.Beijing Institute of Electro-Machining,Beijing 100191,China; 2.Dimon Beijing CNC Technology Co.,Ltd,Beijing 100191,China);Modal Analysis for EDM Machine Tool[A];[C];2013
【Secondary Citations】
Chinese Journal Full-text Database 3 Hits
1 Yu Dejie Song Jianwei Peng Zemin(Dept. of Mech. Engr., Tianjin University);IDENTIFICATION OF DYNAMIC PARAMETERS FOR COMPLEX STRUCTURE JOINTS[J];Journal of Mechanical Strength;1988-01
2 Tong Zhongfang Zhang Jie (Zhejiang University);RESEARCH ON THE DYNAMIC CHARACTERISTIC AND ITS IDENTIFICATION OF THE JOINT BETWEEN COLUMN AND BED OF A MACHINING CENTER[J];Journal of Vibration and Shock;1992-03
3 Chen Weifu, et al(5);Optimum Identification Method to Predicate Interface Characteristic of Mechanical Structure System[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1998-09
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved