Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Beijing University of Technology》 2006-08
Add to Favorite Get Latest Update

Analysis and Modeling About Milling Force in Plunge Milling for Ti-6AI-4V Based on Regression

QIN Xu-da~1 ZHAO Jian-bo~1 ZHANG Jian-gang~1 LIU Huan-ling~1 Tom O Muller~2 Ni Wang-yang~2 Liu Yi-xiong~2 1.School of Mechanical Engineering,Tianjin university Tianjin 300072,China; 2.Kennametal Inc.Latrobe,PA 15650,USA  
In view of the characteristic of machinability of Ti alloy,the process of plunge milling Titanium al- loy with(Ti-6Al-4V)is researched on.In this paper,an experiment platform for the testing and analysis of cutting force is established,and the changing law of cutting force is studied.The model of milling force in plunge milling Ti-6Al-4V is built by Taguchi orthogonal method and fitting of multivariable linear regression on the basis of experiment.Through the verification of experiment data,the model is valid,and the error of cutting force is within 10%,which supplies important reference to research on the plunge milling of Ti-6Al- 4V.
【Fund】: 北京市先进制造技术重点实验室开放项目(10200531);; Kennametal(USA)-天津大学联合研究项目.
【CateGory Index】: TG54
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 4 Hits
1 Zhai Yuansheng;Zhang Jijun;Hu Jingshu;Li Yufu;;Prediction of Cutting Force in Plunge Milling using Genetic Algorithm Toolbox[J];Tool Engineering;2014-04
2 ;Analysis and Modeling of Plunge Milling Force on PH13-8Mo[J];Aeronautical Manufacturing Technology;2010-05
3 ;Research Status of Plunge Milling Technology In NC Machining[J];Aeronautical Manufacturing Technology;2014-08
4 LUO Han-bing,ZHAO Jun,LI An-hai,CUI Xiao-bin(Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE,School of Mechanical Engineering,Shandong University,Jinan 250061,China);An Experiment Study on Milling Forces in High Speed Milling Titanium Alloy[J];Modular Machine Tool & Automatic Manufacturing Technique;2011-05
Chinese Journal Full-text Database 2 Hits
1 Chang Hao, He Ning, Man Zhonglei (College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016);Study on the cutting force and tool wear of milling TC4[J];Aviation Precision Manufacturing Technology;2003-03
2 Li Yancong1,Niu Wentie2,Zhang Weiyu1(1.Tianjin Agricultural College;2.Tianjin University);Experimental Study on Milling Force of Stainless Steel Round Head[J];Automobile Technology;2004-05
Chinese Journal Full-text Database 10 Hits
1 WANG Li-xin LI Guo-wei CHEN Yan (Anyang lnstitute of Technology,Anyang 455000,China);Research on Tool Path of the Glass Bulb Panels Surface of Ball-end Milling Cutting Tool[J];Journal of Anyang Institute of Technology;2006-04
2 LIU Zhong-he,HE Jing-liang (Department of Mechanical Engineering,Beijing Institute of Machinery,Beijing 100 085,China);Research on Web-based cutting database and expert system[J];Journal of Beijing Institute of Machinery;2006-03
3 WU Wen-ge~(1,2),PANG Si-qin~1,CHANG Xing~2 (1.School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing100081, China; 2.Department of Mechanical Engineering,North China Institute of Technology, Taiyuan, Shanxi030051, China);Mechanical Analysis of Machining Error in Turning Slender Shafts by Reversible Turning Technique[J];Journal of Beijing Institute of Technology;2004-02
4 HU Di-chuan(Depantment of Mechanical and Electric Engineering,Inner Mongolia Technical College of Machinry and Electricity Occupation,Hohhot 010000,China);Establishment of numerical control processing cutting parameter model and optimization algorithm[J];Journal of Inner Mongolia University of Science and Technology;2007-03
5 Cong Bin; Liu Heng; Yan Shuren (Harbin Electric Machinery Company Limited);Analysis of Deformation Trend for High Speed Milling[J];LARGE ELECTRIC MACHINE AND HYDRAULIC TURBINE;1999-04
6 Zhang Genbao,Zhang Bo,Wei Hongjun(School of Mechanical Engineering,Chongqing University,Chongqing 400044,China);Research on application of cryogenic cold air in hobbing process[J];Cryogenics and Superconductivity;2009-12
7 Liu Zhanqiang et al;Investigation of Wear Lifespan of Cutting Tools in High-speed Machining[J];Tool Engineering;2001-12
8 Liu Zhanqiang Huang Cuanzhen Wan Yi et al;Summary of Cutting Temperature Measurement Methods[J];Tool Engineering;2002-03
9 Bi Lei Yang Chi Luo Peng;Application of Virtual Manufacturing Technique in Machining[J];Tool Engineering;2005-02
10 Pan Minqiang Tang Yong Liu Yajun;Lexicographically Stratified Programming Model for Optimization of Cutting Parameters in Turning[J];Tool Engineering;2005-08
Chinese Journal Full-text Database 10 Hits
1 Li Shuhu, Chen Yiwei (Institute 53 of China's Ordnance Industry, Jinan 250031, China);DETERMINATION OF THE LONGITUDINAL-TRANSVERSE SHEAR PROPERTIES OF CARBON COMPOSITE[J];Engineering Plastics Application;2002-11
2 WEI Baoli,XIA Xianming (Anhui Agricultural Teachers College,Anhui Fengyang 233100);Form Mechanism Analysis of Crudeness and Reduction Measures[J];Journal of Anhui Agrotechnical;2000-01
3 LIU Ying,QU Zhou-de, WANG Ben-xian(The School of Mechanical Engineering, Northeastern University, Shenyang 110004, China; Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China);Research development and application of Ti6A14V alloy[J];Ordnance Material Science and Engineering;2005-01
4 YU Ai-bing1,2,WANG Min2,TIAN Xin-li3(1.Faculty of Engineering,Ningbo University,Ningbo 315211,Zhejiang,China;2.The State Education Ministry Key Laboratory of Advanced Ceramics and Machining Technology,Tianjin University,Tianjin 300072,China;3.Institute of Armored Force,Beijing 100072,China);Grindability Evaluation of Ceramics via Grey Clustering Approach[J];Acta Armamentarii;2007-02
5 LI Hong~1, HUANG Lang-huan~1, RAN Jun-guo~2 , GOU Li~2 (1.Department of Chemistry, Jinan University, Guangzhou 510632, P.R.China; 2.Department of Inorganic Materials, Sichuan University, Chengdu 610065, P.R.China);Properties and Microstructure of Machinable Glass-Ceramic in CaO-MgO- Al_2O_3-SiO_2-F System[J];Glass & Enamel;2005-02
6 YU Kai-zhi (Department of Mathematics and Computer, Chongqing Teacher's University, Chongqing 400047,China);A Case Study on Carrying out Regression Analysis by Means of SPSS[J];Journal of Chongqing Institute of Technology Management;2002-02
7 ZHAO Yongqing WEI Jianfeng GAO Zhanjun LI Yuelu WU Huan LIU Caili FENG Liang CHANG Hui ( Northwest Institute For Nonferrous Metal Research,Xi'an 710016; School of Environmental and Chemical Engineering,Xi'an Jiaotong University,Xi'an 710049; Chinese Academy of Engineering,Beijing 100038);Titanium Alloys:Current status of Application and Low Cost Manufacturing Technologies[J];Materials Review;2003-04
8 SUN De-ming~(1,2),LU Xiao-yang~(1,2),LI Cheng-mei~1,XUE Zhong-shun~3,CHEN Huai-ming~1,YUE Xue-tao~1,SUN Sheng~2(1 Shandong Institute of Architecture and Engineering,Jinan 250014,China;2 School of Materials Science & Engineering,Shandong University,Jinan 250061,China;3 Xinlai Real Estate Corp.,Laigang Group,Jinan 250021,China);Effect of Cr_3C_2 and(W,Ti)C on the Vickers Hardness of Al_2O_3/Cr_3C_2/(W,Ti)C Ceramic Composites[J];Journal of Materials Engineering;2005-11
9 Peng Yanping Zeng Fanchang Wang Junjie Zhang Yining Xia Shaoyu (Aviation Industry of China);Development,Application and Feature of Titanium Alloys in Foreign Aviation Industry[J];JOURNAL OF MATERIALS ENGINEERING;1997-10
10 Guo Shaoyi Li Jian Mao Dongsheng Mao Zhiyuan (Dept of Mat Sci & Eng ,Zhejiang University);Mechanical Properties and Fracture Behavior of Al 2O 3 TiC Co Advanced Composites[J];JOURNAL OF MATERIALS ENGINEERING;1997-11
【Secondary References】
Chinese Journal Full-text Database 9 Hits
1 CHEN Man-long(School of Mechanical Engineering,Shanxi University of Technology,Hanzhong 723003,China);New female thread machining method of titanium alloy[J];Forging & Stamping Technology;2011-04
2 HUANG Chun-bo;XUE Chun;FU Yi-Fang;ZHANG Zhan;WANG Ling-qi;ZHOU Yi-ming;Shanghai Research Institute of Materials;Hefei Tongyong Special Material Equipment Co.,Ltd.;Shanghai Bearing Technology Research Institute;;Corrosion Resistance of PH13-8Mo Stainless Steel in 3.5% NaCl Solution[J];Corrosion & Protection;2013-09
3 Wang Qingping;Sun Jianfei;Chen Wuyi;;Overview on Geometry Design of End Mills[J];Tool Engineering;2014-04
4 Zhai Yuansheng;Zhang Jijun;Hu Jingshu;Li Yufu;;Prediction of Cutting Force in Plunge Milling using Genetic Algorithm Toolbox[J];Tool Engineering;2014-04
5 ;Research Status of Plunge Milling Technology In NC Machining[J];Aeronautical Manufacturing Technology;2014-08
6 LI Tie-gang1,2,FAN Zhi-guang2,WANG Wan-shan1(1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China;2.Mechanical Department,Shenyang Institute of Engineering,Shenyang 110136,China);Machining Parameter Optimization based on Data Mining[J];Modular Machine Tool & Automatic Manufacturing Technique;2012-01
7 LIU Shi;CUI Yawen;PENG Yu;NC Machining Factory,Chengdu Aircraft Industrial (Group) Co. ,Ltd.;;Research on NC milling processing and programming of corner feature in aircraft structural parts[J];Manufacturing Technology & Machine Tool;2013-11
8 Chen Jianling;Sun Jie;Li Jianfeng;Shandong Jiaotong University;Shandong University;;Multi-objective Optimization of Cutting Parameters during Milling of Titanium Alloys[J];China Mechanical Engineering;2014-02
9 CHEN Qing-liang;HE Ning;LI Liang;ZHAO Wei;SHI Qi;Colloege of Mechanical and Electrical Engineering,Nanjing University of Aeronautics & Astronautics;Chengdu Aircraft Industrial ( Group) Company Manufacturing Engineering;;NC Program Optimization and Application in High Feed Milling Titanium Alloys[J];Machine Building & Automation;2014-01
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 Ren Bingyin Liu Huaming;Research on the Key Problems of 5-axis NC Machining of Free Curved Surfaces[J];MODULAR MACHINE TOOL & AUTOMATIC MANUFACTURING TECHNIQUE;1998-08
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved