Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Beijing University of Technology》 2008-01
Add to Favorite Get Latest Update

Improvement and Application on Response Surface Methodology in Shape Optimization

SUI Yun-kang ZHANG Xuan YU Hui-ping (Numerical Simulation Center for Engineering,College of Mechanical Engineering and Applied Electronics Technology Beijing University of Technology,Beijing 100022,China)  
Based on Response Surface Methodology(RSM),the objective function and constraint conditions are approximately explicit to overcome difficulty of sensitivity analysis,the Sequential Quadratic Programming (SQP)model was formed to find optimal shape under displacement and stress constraints.An improved re- sponse surface with exact value on the design point is constructed,which eliminates the intrinsic inaccuracy of response surface.The constraint response surface,combined with improved experiment design method,was constructed through few times structure analysis.A second-order evaluation function was set up for each con- straint condition.Rational move limits for each design variable were calculated in terms of the relative errors between constraint response surfaces and evaluation functions.The optimization strategy formed with less computation and higher precision.Examples are given to show the efficiency and stability of this optimization strategy.
【Fund】: 国家自然科学基金(10472003);; 北京市自然科学基金(3042002)
【CateGory Index】: TB114.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Zhang Chuanli; Zhang Xibin(Jianghan Petroleum Institute, Jingsha 434102 )Song Tianxia(Huazhong University of Science and Technology, Wuhan 430074, China );Sensitivity Analysis in Dynamic Structure Optimization[J];JOURNAL OF JIANGHAN PETROLEUM INSTITUTE;1994-04
2 SUI Yun-kang,ZHANG Xuan,YU Hui-ping(Numerical Simulation Center for Engineering,Beijing University of Technology,Beijing 100022,China);Computation for move-limits with approximate function and its application in structure shape optimization[J];Chinese Journal of Computational Mechanics;2007-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LI Shan-po, SUI Yun-kang, YU Hui-ping (The Centre of Numerical Simulation for Engineering, College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China);Response Surface Method With Basis Function Approximation[J];Journal of Beijing University of Technology;2006-S1
2 CHEN Gang,ZHAO Guo-zhong,GU Yuan-xian(State Key Lab.of Struct.Anal.for Ind.Equip.,Dalian Univ.of Technol.,Dalian 116024,China);Sensitivity analysis and design optimization of acoustic eigenfrequency for lightly damped cavities[J];Journal of Dalian University of Technology;2007-04
3 SUI Yun-kang , LI Shan-po (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100022, China);THE APPLICATION OF IMPROVED RSM IN SHAPE OPTIMIZATION OF TWO-DIMENSION CONTINUUM[J];Engineering Mechanics;2006-10
4 Zhang Chuanli Dept. of Mechanics, HUST, Wuhan 430074, China. Shu Gan Peng Xingqian;A Sensitivity Analysis Using the Dynamic Substructure Technique[J];JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY;1997-S1
5 Zhang Chuanli Xiong Caihua Xu Yihong Jianghan Petroleum Institute,Jingzhou 434102Song Tianxia Huazhong University of Science and Technology,Wuhan 430074;An Analysis of Sensitivity to the Dynamic Response of a Nonlinear Structure[J];Journal of Jianghan Petroleum Institute;1997-02
6 LI Shanpo, Sui Yunkang, YU Huiping (Numerical Simulation Center, Eng. for Beijing Univ. of Tech., Beijing 100022, China);Structural Shape Optimization of Two-dimension Continuum and Second Development on MSC Nastran[J];Computer Aided Engineering;2006-S1
7 SUI Yun-kang,ZHANG Xuan,YU Hui-ping(Numerical Simulation Center for Engineering,Beijing University of Technology,Beijing 100022,China);Computation for move-limits with approximate function and its application in structure shape optimization[J];Chinese Journal of Computational Mechanics;2007-04
8 ZHANG Hong-wei~1,ZHANG Yi-du~1,WANG Xi-ping~2,ZHAO Xiao-ci~1(1.School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100083,China;2.School of Civil and Hydraulic Engineering,Shandong University,Jinan 250061,China);Dynamic modification on the frame of certain agricultural vehicle based on sensitivity analysis[J];Journal of Machine Design;2006-06
9 LI Shanpo SUI Yunkang (The Centre of Numerical Simulation for Engineering, Beijing University of Technology, Beijing 100022, China);THE APPLICATION OF RSM IN SHAPE OPTIMIZATION OF TWO-DIMENSIONAL CONTINUUM[J];Mechanics in Engineering;2006-02
10 Wu Jianguo Chen Xin Mao Haijun Sun Qinghong (Department of Mechanical Engineering, Southeast University Nanjing 210096,P.R.China);Sensitivity Analysis and Dynamic Design of Design Parameters for Internal Grinder Bed[J];Journal of Nanjing University of Aeronautics & Astronautics;2002-06
【Co-references】
Chinese Journal Full-text Database 4 Hits
1 Li Zaixian;Liu Ying;Li Qingshan;Gao Minkun;Wang Xiaoping;Study on Spot Welding Properties of Cold-Rolled Dual-Phase Steel SX55[J];JOURNAL OF NORTHEASTERN UNIVERSITY;1995-02
2 ZHANG Xiao-yun, ZHANG Yan-song, CHEN Guan-long(School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200030, China);On-line weld quality inspection based on weld indentation by using servo gun[J];Transactions of the China Welding Institution;2006-10
3 Zhu Zhibin~(1,2) Zhang Kecun~1 1 (Faculty of Science,Xi'an Jiaotong University, Xi'an,710049) 2 (Department of Computational Science and Mathematics, Guilin Institute of Electronic Technology, Guilin, 541004);A NEW SQP ALGORITHM FOR INEQUALITY CONSTRAINED OPTIMIZATION[J];Mathematica Numerica Sinica;2004-04
4 T. Y. Hsn(Shanghai Jiao Tong University);METALLOGRAPHIC INSPECTION,PHASE TRANSFORMA-TION AND THEIR APPLICATIONS[J];Physical Testing and Chemical Analysis Parta Physical Testing;1994-05
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 Lin Shuzhi(China Construction Northeast Design Institute)Cheng Gengdong(Dalian University of Technology);MODE SPACE METHOD FOR SENSITIVITY ANALYSIS OF DYNAMIC RESPONSE[J];Earthquake Engineering and Engineering Vibration;1990-03
2 WANG Xiao-Feng XI Guang WANG Shang-Jin (Xi'an Jiaotong University, Xi'an 710049, China);APPLICATION OF RESPONSE SURFACE METHODOLOGY IN THE OPTIMIZATION DESIGN OF VANED DIFFUSER[J];Journal of Engineering Thermophysics;2003-03
3 Liu Hongqui, Xia Renwei(Institute of Mechanics, Academia Sinica, Beijing, 100080) (Beijing University of Aeronautics and Astronautics, 100083);Sensitivity Analysis on Shape Optimization Based on Adjoint System Equations with Two-Class Variables[J];;1993-01
4 Lin Jiahao(Dalian Institute of Technology);SENSITIVITY ANALYSIS IN STRUCTURAL DYNAMIC OPTIMIZATION[J];Journal of Vibration and Shock;1985-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved