Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Beijing University of Technology》 2010-12
Add to Favorite Get Latest Update

Wear Patterns and Mechanism of Coated Cemented Carbide Tool in High Speed Milling Superalloy GH2132

LIU Chao,AI Xing,LIU Zhan-qiang,WAN Yi(Key Laboratory of High Efficiency and Clean Mechanical Manufacture,Ministry of Education,Shandong University,Jinan 250061,China)  
Two kinds of coated Cemented carbide tools were used to mill Iron-based superalloy GH2132 at high-speed under dry cutting condition.Wear patterns wear observed by SEM,the main mechanism of tools were analysed,Results show that flank wear is the main wear pattern;the coating of KC725 is made from TiN and TiAlN,so it is more easy to flake;the coating of KC525M is made from only TiAlN,it is not easy to flake,but groove wear was find at cutting edge because of Mechanical impact,the formation of stress concentration leads to more bigger wear at cutting edge.No matter KC525M or KC725M the felting phase is intenerated for the instantaneous heat collection in the cutting section,which leads to the falling of the rigid phase grains and serious abrasion of the base body.The results might be helpful to guiding the design and selection of tool materials and control of tool wear in high speed machining processes.
【Fund】: 国家重点基础研究发展计划资助项目(2009CB724402)
【CateGory Index】: TG54
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 10 Hits
1 Liu Chao,Ai Xing,Liu Zhanqiang,Wan Yi;Modeling and Analysis on Cutting Force and Surface Roughness in Turning of High Temperature Alloy GH2132[J];Tool Engineering;2009-10
2 HAN Rong-di,YIN Bao-lin,CUI Yong-peng(School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,China);Investigation of small-hole vibration tapping in difficult-to-cut materials[J];Journal of Harbin Institute of Technology;2008-01
3 HUANG Shu-tao1,JIA Chun-de1,JIANG Zeng-hui1,YU Jun-yi2(1.School of Mechanical Engineering,Shenyang Ligong University,Shenyang 110168,China;2.Institute of Mechanical Science and Engineering,Jilin University,Changchun 130025,China);Cutting performance and wear mechanism of TiN coat cutter in high speed turn-milling[J];Journal of Harbin Institute of Technology;2008-09
4 ;Tool Wear of Cubic Boron Nitride Bite for Turning Powder Superalloy[J];Aeronautical Manufacturing Technology;2001-01
5 Wang Dianlong Xun Zhifeng (Dalian University of Technology) Pang Jiyou Sun Anyou Zhang Chuan (Shenyang Liming Aero-engine Group Corporation);AN INVESTIGATION OF THE MACHINABILITY OF K24 NICKEL-BASED SUPER ALLOY[J];Chinese Journal of Mechanical Engineering;2002-S1
6 HAN Rong-di, TANG Yan-li(School of Mechanical and Electronic Engineering, Harbin Institute of Technology, Harbin 150001, China);Study on the Friction and Wear Behavior of a High-Speed Steel Tap in Tapping of Nickel-Based High-Temperature Alloy[J];Tribology;2005-01
7 ;Turning of Powder Metallurgy Superalloy for Aviation Industry[J];Aeronautical Manufacturing Technology;2010-15
8 Han Rongdi Wang Hui Liu Junyan Wang Yang(School of Mechatronics Engineering,Harbin Institute of Technology,Harbin Heilongjiang 150001,China);Study on Tool Wear of Green Cutting Nickel-based Superalloy GH4169[J];Lubrication Engineering;2008-08
9 AI Xing(College of Mechanical Engineering,Shandong University,Jinan250061,China);Encouraging independent innovation,speeding up the development and application of advanced machining technology,improving the level of manufacturing technologyies[J];World Manufacturing Engineering & Market;2006-01
10 Xiao Maohua He Ning Li Liang Liu Haibin Nanjing University of Aeronautics and Astronautics,Nanjing,210016;Experimental Studies on Notch Wear for High Speed Machining of Nickel-based Superalloy with Ceramic Tools[J];China Mechanical Engineering;2008-10
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Wu Yuming (The Building Material Industrial School of Gansu Province,Lanzhou 730079,China);The Effection of the Thermic Distortion in the Machining Accuracy and the Action Taked[J];Journal of Changchun University of Science and Technology(Higher Education Edition);2008-03
2 ZHAO Shilu1,2 ,ZHANG Jun1,2 ,LIU Changsheng1(1 Key Laboratory of Materials Anisotropy and Texture Engineering,Northeastern University,Shenyang 110004;2 School of Mechanism Engineering,Shenyang University,Shenyang 110044);Cutting Performance and Application of Coated Cutting Tools[J];Materials Review;2008-11
3 LIU Lei1,TIAN Xiu-bo1,ZHANG Chun-guang1,YANG Shi-qin1,2(1.State Key Laboratory of Advanced Welding Production Technology,Harbin Institute of Technology,Harbin 150001,China;2.Shenzhen Key Lab. of Composite Materials,Shenzhen Tech-innovation International Institute,Shenzhen 518057,China);Influence of loading parameters on tribological behavior of TiN coating[J];Materials Science and Technology;2009-01
4 YANG Fa-zhan1,2,ZHAO Jun1,AI Xing1,JIANG Zhi-quan3 (1.School of Mechanical Engineering,Shandong University,Jinan 250061,China;2.School of Mechanical Engineering,Qingdao Technological University,Qingdao 266033,China;3.School of Farming Mechanization,Laiyang 265200,China);Effects of sintering temperature on mechanical properties and microstructure of WZV material[J];Materials Science and Technology;2009-03
5 ZHANG Chong,YIN Dong-ping(CETC NO.38 Research Institute,Hefei 230031,China);Manufacturing Technics of Thin-wall Parts[J];Electronics Process Technology;2008-01
6 WU Zi-hao (Nanjing Research Institute of Electronics Technology, Nanjing 210013, China);Selection of Tools for High-speed Milling of Aluminum Alloy and Comprehesive Ambiguity Judgment[J];Electro-mechanical Engineering;2005-02
7 XU Chun-ting,ZHANG Chong(The 38th Research Institute of CETC,Hefei 230031,China);A Study on Milling Forces in High Speed Milling[J];Electro-Mechanical Engineering;2009-01
8 Guo Xuhong Zeng Tingwei Liu Kaiqiang et al;Study on Wear Mechanism of PCBN Cutting Tools in Dry-Cutting Hardened GCr15 Bearing Steel[J];Tool Engineering;2004-06
9 Qin Zhe Wang Chengyong Wu Xueqi et al;Research of Extended Length of High-Speed Milling Tool[J];Tool Engineering;2004-09
10 Zhao Jun Meng Hui Wang Suyü et al;Finite Element Simulating Analysis of Serrated Chip Formation in High Speed Cutting[J];Tool Engineering;2005-01
China Proceedings of conference Full-text Database 1 Hits
1 Xu Feng1,2 Zhu Jian Jun1 Zang Xiao Jun1 Wu Xin1 Zuo Dun Wen2 (1 Nanjing Research Institute of Electronics and Technology, Nanjing, 210013, China, 2 Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China);Key Technologies of the Optimal Milling Parameters Database for Radar Key Parts[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Hv Huanan;Xu Dayuan;Zhang Chonggao South China University of Technology Anhui Institute of Technology;A REVIEW ON TECHNOLOGY FOR MACHINING SUPERALLOYS[J];;1990-04
2 Han Rongdi;Experimental Investigation on Small-hole Tapping Torque of Deformable Ni-base High-temperature Alloy[J];Tool Engineering;2003-05
3 Xu Jin Ye Bang-yan(College of Mechanical Engineering, South China Univ. of Tech., Guangzhou 510640, Guangdong, China);Microtopography and Microstructure Characteristics of the Carbon Steel Surface Machined with High-speed Turning[J];Journal of South China University of Technology(Natural Science);2004-10
4 CHEN Hai gang 1, WU Xue dong 1, WANG Da pu 1, YANG Sheng rong 2 (1.School of Chemistry and Chemical Engineering, Shanghai Jiaotong University, Shanghai 200240, China; 2.State Key laboratory of Solid Lubrication, Lanzhou Institute of Chemical Phy;Lubrication Mechanism of Various Water-based Metallic-Cation Additives in Machining of Titanium Alloys[J];Tribology;2001-01
5 LONG Zhen-hai, WANG Xi-bin, LIU Zhi-bing(School of Mechanical and Vehicle Engineering, Beijing Institute of Technology, Beijing 100081, China);Research on Wear Modes and Mechanism of Carbide Tools in High-Speed Milling of Difficult-to-Cut Materials[J];Tribology;2005-01
6 He Ning; Xu Hongchang; Pan Liangxian; Wang Min(Department of Mechanical Engineering, NUAA Nanjing, 210016);High Speed Cutting of Difficult-to-Machining Materials[J];TRANSACTIONS OF NANJING UNIVERSITY OF AERONAUTICS & ASTRONAUTICS;1996-02
7 Jia Xiaoming Wang Baozhong(Hebei Institute of Technology,Tangshan 063009) Feng Xijing(Power Generating Plant, Hebei Xuanhua Iron & Steel Co , Zhangjiakou 075105);Analysis of Green Machining Technology[J];Lubrication Engineering;2002-06
8 Han Rongdi Liu Junyan (Dept.of Mechanical Manufacture and Automation,Harbin Institute of Technology,Harbin 150001,China);The Kinetic Modeling of Cutting Fluid Penetrated Capillary During Machining[J];Lubrication Engineering;2005-01
9 Liu Guoqiang;Analysis of research result about machining center utilization rate[J];Machinery Manufacturing Engineer;2004-07
10 Huang Chuanzhen and Ai Xing (Institute of Mechanical Engineering,Shandong University of Technology,Jinan 250014);ASTUDY ON THE CUTTING PERFORMANCE OF ADVANCED CERAMIC TOOL JX-2-ⅠIN MACHINING Inconel718[J];Cemented Carbide;1995-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved