Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Beijing University of Aeronautics and Astronautics》 2004-10
Add to Favorite Get Latest Update

Factors effecting on the wicking of epoxy resin in capillaries of unidirectional fibre bundles

Zhang Zuoguang Li Min Sun Zhijie Chen Liang (School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China)  
Understanding the wetting behavior of resin in fiber assemblies is critical for predicting and improving the fabrication performance of composites. According to capillary rise method, the wicking flow in unidirectional fiber bundles was characterized through measuring the mass gain in fibers at different time. The effects of many factors on the wicking performance of epoxy resin in unidirectional fiber bundles were investigated, such as the volume fraction of fibers, the type of fibers, the temperature of resins and the sizing on fibers. The experimental data suggest that the wicking velocity of resins could be increased with increasing fiber volume fraction, with enhancing temperature and by removing the sizing on S-2 glass fibers.
【Fund】: 国家 8 63基金资助项目 ( 2 0 0 1AA3 3 5 0 2 0 )
【CateGory Index】: TB332
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 8 Hits
1 YU Yu-qiang1,2,ZHANG Zuo-guang1,TANG Bang-ming2,LIANG Zi-qing2(1 School of Materials Science and Engineering,Beijing University ofAeronautics and Astronautics,Beijing 100083,China;2 National Key Laboratoryof Advanced Composites,Beijing Institute of Aeronautical Materials,Beijing 100095,China);Study on Capillary Pressure of Fabric Preforms[J];Journal of Materials Engineering;2006-06
2 JIAN Kangkang,ZHANG Zuoguang~*,GU Yizhuo,SUN Zhijie(School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Experimental research of saturated permeability with different fiber stacking states[J];Acta Materiae Compositae Sinica;2006-01
3 ZHANG Peilin,ZHANG Zuoguang~*,LI Min,SUN Zhijie(School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Experimental study on the capillary impregnation in plane of unidirectional fabrics[J];Acta Materiae Compositae Sinica;2006-04
4 WU Xiaoqing*,LI Jialu (Key Laboratory for Advanced Textile Composites of Ministry of Education,Tianjin Polytechnic University,Tianjin 300160,China);Permeability of the 3D braided preform based on the unidirectional flow measurement[J];Acta Materiae Compositae Sinica;2007-03
5 WU Xiaoqing,LI Jialu,LIU Jinghong(Key Laboratory for Advanced Textile Composite of Ministry of Education,Tianjin Polytechnic University,Tianjin 300160,China);Permeability of stitched preform in RTM[J];Acta Materiae Compositae Sinica;2008-03
6 CHENG Rong,JANG Shichun,AN Lijia (State Key Laboratory of Polymer Physics and Chemistry,Changchun Institute of Applied Chemistry,Chinese Academy of Sciences,Changchun 130022);WETTABILITY OF EPOXY RESIN ON CARBON FIBER[J];Acta Polymerica Sinica;2009-04
7 QIAN Xiusong1,CHEN Meicheng2,LUAN Shilin1,LIU Li3(1.Harbin FRP Institute,Harbin 150036)(2.Jiangsu Tianchan Glass Fiber Composites Co.Ltd 213134)(3.Harbin Institute of Technology,Harbin 150001);Study of Wettability between Glass Fibric and Bisphenol-A Standard Vinyl Ester Resin by Ultrasonic Treating[J];Fiber Composites;2010-04
8 XIAO Hong-bo,WANG Jun,YANG Xiao-li,CAI Hao-peng(School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China);Research on Unsaturated Polyester Resin Wetting Velocity[J];Journal of Wuhan University of Technology;2006-07
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Gong Zhaohe 1,2 , Zhou Wensheng 1 , Wang Xudong 2 , Liang Guozheng 1 , Zhang Mingxi 3 , Xu Jingxiang 4[1.Department of Applied Chemistry, College of Science, North-Western Polytechnic University, Xi’an 710072 China; 2.The Representative’s Office for the Air Force in Jinan Area, Jinan 250023, China; 3.The Institute 637 of Aviation, Jinan 250023, China;4.The Representative’s Office of the Navy Force in Tianjing Area(Jinan), Jinan 250023, China];RESEARCH ON THE SOAKAGE OF RESIN/FIBER IN VARTM FOR HIGH PERFORMANCE RADOME[J];Engineering Plastics Application;2004-08
2 Chen Lijun1,2,Wu Fengqin3,Zhang Xinyu1,2,Yang Jian1,Li Rongxian1,2(1.Research Institute of Tsinghua University in Shenzhen,Shenzhen 518057,China;2.Department of Material Science and Engineering,Tsinghua University,Beijing 100084,China;3.Shenzhen Novel Company,Shenzhen 518054,China);APPLICATIONS AND MOLDING TECHNIQUES OF EP/CF COMPOSITE[J];Engineering Plastics Application;2007-10
3 BI Hong,YUAN De-li,ZHANG Yu-chuan (Department of Chemistry of Anhui University, Hefei, 230039 China)$$$$;Study on a Novel Biodegradable Polyurethane Material from Tea(Ⅰ)[J];Journal of Anhui University(Natural Sciences);2000-04
4 Cheng Xiaoquan (School of Aeronautics Science and Technology, Beijing University of Aeronautics and Astronautics, Beijing 100083, China) Zhao Long (Beijing Aeronautical Manufacture Technology Research Institute, Beijing, 100024, China) Zhang Yining (Shenyang Institute of Aircraft Design and Development, Shenyang, 110035, China);Properties of stitched composite laminates——the principle properties of simple laminates[J];Journal of Beijing University of Aeronautics and Astronautics;2003-11
5 Zhang Gangyi Shen Yukao (China Scientific & Technological lndustrial Group Corporation of Inorganic Materials);INTRODUCTION OF RESIN FLOW CONTROL IN RTM TECHNOLOGY[J];FIBER REINFORCED PLASTICS/COMPOSITE;1999-05
6 Liang Zhiyong Duan Yuexin Lin Yun Zhao Dayong Zhang Zhuoguang (Beijing University of Aero.& Astro.);STUDY OF MIXED RESIN SYSTEMS FOR RESIN TRANSFER MOLDING CHEMICAL REACTIVE CHARACTERIZATION AND PROCESSING PROPERTIES[J];FIBER REINFORCED PLASTICS/COMPOSITE;2000-05
7 Duan Huajun Ma Huiru Wang Jun;RESEARCH STATUS OF RTM PROCESS AT HOME AND ABROAD[J];FIBER REINFORCED PLASTICS/COMPOSITE;2000-05
8 Li Baisong Wang Jihui Deng Jinglan (State Material Synthesis Key Lab., Wuhan University of Technology);STUDY ON VACUUM-ASSISED RESIN TRANSFER MOLDING[J];Fiber Reinforced Plastics/composite;2001-01
9 Qiu Guijie\;(Wuhan University of Technology)\;;INFLUENCE OF PROCESSING AND MATERIAL VARIABLES ON RESIN-FIBER INTERFACE IN LIQUID COMPOSITE MOLDING[J];Fiber Reinforced Plastics/composite;2002-02
10 Duan Huajun Wang Jun Yang Xiaoli (Wuhan University of Technology);STUDY ON LOW VISCOSITY EPOXY RESIN CURING SYSTEM[J];Fiber Reinforced Plastics/composite;2003-01
China Proceedings of conference Full-text Database 1 Hits
1 CHEN Zupan, WU Xiaoqing, LI Jialu (Composites Research Institute of Tianjin Polytechnic University, Tianjin 300160, China);Numerical simulation of 3-D braided preform in RTM[A];[C];2005
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 LI Min,ZHANG Zuo-guang,LI Yan-xia,GU Yi-zhuo (School of Materials Science and Engineering,Beijing University of aeronautics and astronautics,Beijing 100083,China);Analysis of Parameter of Pressure Application for Laminated Composites in Hot Pressing Process[J];Journal of Materials Engineering;2007-S1
2 LIU Qiang1,ZHAO Long1,HUANG Feng1,GAO Yan-qiu1,WU Gang1,ZHAO Pan-feng1,LU Jun-peng2(1 Beijing Aeronautical Manufacturing Technology Research Institute,Beijing 100024,China;2 ESI-ATE Co.Ltd,Beijing 100001,China);The Application of Simulation Software in the Studies of Aeronatural Typical Structure Component[J];Journal of Materials Engineering;2007-S1
3 ZHANG Yang,ZHANG Yao-zhou,TANG Bang-ming,AN Xue-feng,YI Xiao-su(National Key Laboratory of Advanced Composites,Beijing Institute of Aeronautical Materials,Beijing 100095,China);Study on the Permeability of ES-Fabric~(TM)[J];Journal of Materials Engineering;2009-S2
4 YANG Jinjun,ZHANG Zuoguang*,LI Min,SUN Zhijie(School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Effect of fiber distribution uniformity on the mechanical properties of composite laminates[J];Acta Materiae Compositae Sinica;2007-01
5 WU Xiaoqing*,LI Jialu (Key Laboratory for Advanced Textile Composites of Ministry of Education,Tianjin Polytechnic University,Tianjin 300160,China);Permeability of the 3D braided preform based on the unidirectional flow measurement[J];Acta Materiae Compositae Sinica;2007-03
6 NI Aiqing1,2,WANG Jihui2,ZHU Yiwen1(1.School of Civil Engineering,Wuhan University,Wuhan 430072,China;2.School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China);Numerical prediction of saturated permeability tensor of a woven fabric for use in the fluid simulation of liquid composite molding[J];Acta Materiae Compositae Sinica;2007-06
7 LI Yanxia,ZHANG Zuoguang,LI Min,GU Yizhuo(School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing100083,China);Numerical simulation on resin flow of laminated composites in hot pressing process[J];Acta Materiae Compositae Sinica;2008-02
8 LIU Yong,WU Songping(School of Aeronautics Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing100083,China);Multi-physics field numerical model for hot-pressing process of composite[J];Acta Materiae Compositae Sinica;2008-02
9 ZHENG Liang1,LIAO Gongxiong1,2,GU Tiesheng1,QU Minjie3,JIAN Xigao *1,2(1.Department of Polymer Science,Dalian University of Technology,Dalian 116012,China;2.Liaoning High Performance Polymer Engineering Research Center,Dalian 116012,China;3.Department of Material Science and Engineering,Dalian Polytechnic University,Dalian 116034,China);Mechanical properties of continuous carbon fiber reinforced PPESK blends composites[J];Acta Materiae Compositae Sinica;2008-03
10 WU Xiaoqing,LI Jialu,LIU Jinghong(Key Laboratory for Advanced Textile Composite of Ministry of Education,Tianjin Polytechnic University,Tianjin 300160,China);Permeability of stitched preform in RTM[J];Acta Materiae Compositae Sinica;2008-03
China Proceedings of conference Full-text Database 5 Hits
1 Gu Yizhuo,Zhang Zuoguang,Li Min,Li Yanxia (Beijing University of Aeronautics & Astronautics,Beijing 100083);Study on Resin Flow and Fiber Compaction in Composites for Hot-press Processing[A];[C];2006
2 Xiaolin Yang,Shilin Yan,Yunfei Yang (School of Sciences,WHUT,Wuhan 430070);Experimental Study on the Transvers Permeability of Liquid in Glass Fibrous Preforms[A];[C];2008
3 SHENGYI TECHNOLOGY CO.,LTD;Technology of prepreg's low carbon production[A];[C];2011
4 Aiqing Ni, Jihui Wang School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070;Study on Permeability for Liquid Composite Molding[A];[C];2007
5 Yang Shichao,Duan Yuexin,Zhao Yan,Sun Jing ( Beijing University of Aeronautics and Astronautics,Beijing 100191);Study on permeability of preform in different shaping methods[A];[C];2010
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved