Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Beijing University of Aeronautics and Astronautics》 2008-02
Add to Favorite Get Latest Update

Parametric design and analysis of front independent suspension of 6×6 off-road vehicle with ADAMS/View

Jiang Libiao Ni Qiang (Dept.of Automotive Engineering,Harbin Institute of Technology,Weihai 264209,China)  
Methods of parametric modeling and analysis supplied by ADAMS/View were used to design and analyze front independent suspension of 6×6 off-road vehicle,and better results were received.The whole process is that firstly dimension parameters of suspension were designed according to design conditions,and then virtual prototype model was built in ADAMS/View,design study and design of experiments.DOE(Desidgn of Expeximents) on suspension model were done at last.It can be obtained by analysis that sideways displacement of wheel has a dereasing tendency when length of lower sway arm is growing and assembly angle of lower sway arm is decreasing. So the length and assembly angle of lower sway arm were chosen to be design variables,and sideway displacement is taken as design objective,parametric optimization was done in ADAMS/Insight.The final test results meet demands of design.This method can improve advances design speed and quality of suspension,and can supply reference for designing high performance suspension in the future.
【Fund】: 山东省自然科学基金资助项目(Y2005F07)
【CateGory Index】: U463.33;U469.3
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 PANG Si-hong (Department of Mechanical and Electronical Engineering, Hebei Chemical and Pharmaceutical College, Shijiazhuang 050026, China);Structure Parameter Optimization and Simulation Analysis of Front Independent Suspension for Automobile[J];Journal of Hebei University of Technology;2008-05
2 YAN Chunli (Northeast Forestry University,Heilongjiang Harbin 150040);Research of Handling Stability for Forest Fire Patrolling Vehicle[J];Forestry Science & Technology;2009-04
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Hu Ning Shanghai University of Engineering Science Zheng Dongli Hubei Instute of Automotive Industry;The Kinematic Analysis of Dual Wishbone Independent Suspension[J];Automotive Engineering;1998-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 TENG Hong-zhi, LV Jian-gang, LIU Yun, SONG Bin (Dept. of Artillery Engineering, Ordnance Engineering College, Shijiazhuang 050003, China);Simulation of New Type Bio-Mimetic Propulsion Unit[J];Ordnance Industry Automation;2007-09
2 REN Zhi-min(Navy Military Deputy Office of Electromechanical Equipment in Chengdu Region,Chengdu 610110,China);Analysis of Artillery Virtual Prototype Technologies and its Laboratories[J];Ordnance Industry Automation;2009-05
3 WANG Xiaoqun,SUN Ping,LI Wei Mechanical Engineering School,University of Science and Technology Beijing,Beijing 100083,China;Modeling and torsional vibration simulation of involute spur gears with asymmetric teeth[J];Journal of University of Science and Technology Beijing;2007-12
4 LUO Jinliang1,2),HUANG Maolin1),WEN Qun2),HE Zhen1)1)School of Mechanical Engineering,Chongqing University,Chongqing 400044,China 2)School of Mechanical Engineering,Nanhua University,Hengyang 421001,China;Structure analysis and optimum design of a blast furnace stopper[J];Journal of University of Science and Technology Beijing;2008-04
5 SHI Xiang-dong,LU Neng-cai(Beijing Institute of Graphic Communication,Beijing 102600,China);Optimization Design of the 16K Folders Based on ADAMS[J];Packaging Engineering;2006-06
6 HE Pan,YAN Hong-zhi(Central South University,Changsha 410083,China);Dynamic Characteristics Analysis of Pneumatic Marking System[J];Packaging Engineering;2007-12
7 CHEN Guo-ping,JIANG De-yun,LI Zhao-xia,WANG Hai-tao(Anhui Agricultural University,Hefei 230036,China);Optimization and Analysis of the DCS-50 Auto-packing Machine[J];Packaging and Food Machinery;2008-05
8 ;虚拟样机技术及其在ADAMS中的应用[J];Journal of Chengdu Electro-mechaical College;2005-04
9 ZHU Yan-fang1 ZHAI Yan1 GUO Xiao-bo2(1.Anyang Institute of Technology,Henan Anyang 455000,China;2.Southeast University,Jiangsu Nanjing 210096,China);Simulation of Running System of Tracked Vehicle's Performances Based on ADAMS[J];Drive System Technique;2008-02
10 Yuan Weiguang Huang Hongcheng(Shanghai Jiaotong University,Shanghai 200240);Dynamic Simulation and Optismization of the Air Mix Door Control Mechanism in Automotive Air Conditioner[J];Drive System Technique;2008-04
China Proceedings of conference Full-text Database 10 Hits
1 SHEN Chen-lin~1,CHEN Ding-fang~1,LU Zhong-hua~1,DONG Hao-ming~2 (1 The Research Inst.of Intelligent Manu f.and Control,Wuhan Uniy.of Tech,Wuhan 430063,China; 2 Wuhan special equipment supervision and inspection institute.wuhan 430063,China);Dynamic Analysis of Gear Reducer Based on Virtual Prototype Technology[A];[C];2008
2 QIN Wei LIU Su GAO Guang-di (School of Mechanical Engineering,Chongqing University,Chongqing 400044,China);Simulation of 1-PS-3-SPS Parallel Manipulator[A];[C];2006
3 CAO Ju-jiang LIU Yan-song (school of Mechanical & Electrical Engineering,Shaanxi University of Science & Techniligy,xi'an 710021,China);Research on Cam Mechanism Simulation Model Based on Flexible Body Theory[A];[C];2007
4 Liu Guang (The 8th Institute of Shanghai Academy of Spaceflight Technology,Shanghai,200233);The Virtual Experiment Simulation of Rudder System Spread Process[A];[C];2008
5 Luo Haitao,Wang Chunjie,Meng Jinhui,Zong Xiao School of Mechanical Engineering & Automation,Beihang University,Beijing,100083,China;Digital Design Of Mechanism System[A];[C];2005
6 WEI Xiao-hui, NIE Hong, LIU Xiao-min ( Faculty 102, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China) ( Department of Mechanical Engineering, Luoyang College of Technology, Luoyang 471003, China);Drop Analysis of Landing Gear Based on the Virtual Prototyping[A];[C];2006
7 HAN Qingkai CHEN Xihong Yao Hongliang Sun Wei WEN Bangchun (School of Mechanical Engineering and Automation,Northeastern University,Shenyang,China);FREQUENCY CAPTURE SIMULATION AND EXPERIMENT OF A ROTOR SYSTEM WITH ELASTIC SUPPORTS[A];[C];2008
8 Li Qiang Huang Yi-yong Chen Xiao-qian Zhao Yong (College ofAerospace and Material Engineering,National University of Defense Technology.Hunan.Changsha.410073);Modeling and Simulating Analysis of the On-orbit Servicing Satellites' Docking Process[A];[C];2009
9 XU Pei-Min1,SHI Zhen-Qiang1,BAO Jia-Han1 WANG Hong-Guang2 (1.School of Mechanical Engineering, Anhui University of Technology, Maanshan, 243002, China; 2.Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, 110016, China);Rigid-Flexible Coupling Modeling and Analysis of Rocker-Bogie Rover[A];[C];2007
10 PENG Xu–yang,ZHANG Zhi–fei,WANG Yuan,ZHAO Wei (The College Of Mechanical Engineering, Chongqing University, Chongqing 400030, China);The Design of Motorcycle Engine Mounting System Based on ADAMS[A];[C];2007
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 He Daping Liao Zhenqiang Wang Tao Wang Hui (School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, 210094);SIMULATION OF THE EJECTION AND RESTORATION PROCESS OF THE EJECTION DEVICE WITH A BLANK CARTRIDGE[J];Acta Armamentarii;2004-04
2 Wan Tao Liao Zhenqiang Jia Annian He Daping Wang Hui (Mech. Eng. College, NUST, Nanjing, 210094);SIMULATION AND ANALYSIS OF TWO PISTON EJECT DEVICE[J];Journal of Ballistics;2002-04
3 SUNHong\|tu,LIUXue\|shu,SONGZhen\|huan,YUChang\|ji( Dept. of Power Eng., Dalian Univ. of Technol., Dalian 116024, China );Research on computer simulation for deformation of vehicle crash[J];Journal of Dalian University of Technology;2002-06
4 HE Kong-de,HE Yu-lin,DU Jing,DING Jian-fei,YANG Shi(College of Mechanical Engineering,Chongqing University,Chongqing 400030,China);Parameterized Design System of Motorcycle Based on Adams Virtual Prototyping Technology[J];Journal of Chongqing University(Natural Science Edition);2005-10
5 YU Wei-ping,GENG Ke-qin,WANG Xiao-gang,YANG Jian(China Institute of Water Resources and Hydropower Research,Beijing 100044,China);Study on a Water Power Station's Roller Compacted Concrete Dam by Three-dimensional Nonlinear Finite Element Method[J];Journal of Water Resources and Architectural Engineering;2006-02
6 NIE Jian-guo1,2,QIN Kai1,2,XIAO Yan3(1.Department of Civil Engineering,Tsinghua University,Beijing 100084,China;2.Key Laboratory of Structural Engineering and Vibration of China Education Ministry,Tsinghua University,Beijing 100084,China;3.Department of Civil Engineering,University of Southern California,Los Angeles,CA 90089,U.S.);EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS[J];Engineering Mechanics;2006-11
7 LI Shi-yun,TANG Fu-yang(Kunming University of Science and Technology,Kunming 650093,China);Kinematic Simulation and Optimization for Spring Operating Mechanism of Circuit Switch Based on UG and ADAMS[J];High Voltage Apparatus;2008-02
8 LIU Hong,HE Yun-zeng,YANG Li-hong(School of Civil Engineering,Harbin Engineering University,Harbin 150001,China);Nonlinear theory of conical helical spring[J];Journal of Harbin Engineering University;2005-05
9 ZHANG Zhi-lin, YAO Wei-xing (Department of Aircraft Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing210016, China);Research on Dynamic Analysis of Bird Impact on Aircraft Windshield[J];Acta Aeronautica Et Astronautica Sinica;2004-06
10 YANG Ji-kuang~(1,2), XU Wei~1, WAN Xin-ming(1.Key Laboratory of Advanced Technology for Vehicle Body Design & Manufacture of the Ministry of Education in Hunan Univ, Changsha,Hunan 410082,China;2.Dept of Mechanical and Vehicle System Engineering, Chalmers Univ of Technology, Sweden);Development and Validation of a Head-Neck Finite Element Model for the Study of Neck Dynamic Responses in Car Impacts[J];Journal of Hunan University (Natural Science);2005-02
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 Mao Ming;Cheng Ruiting;Zhang Xianglin;The Kinematic Analysis of an Automotive Dual Wishbone Independent Suspension[J];Automotive Engineering;1989-04
2 Zuo Wenyi;A Method for Studying the Motion of An Independent Suspension with Double Transverse Rocker Arms and Torsion Bars[J];Automobile Technology;1994-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved