Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Beijing University of Aeronautics and Astronautics》 2010-11
Add to Favorite Get Latest Update

Continuous stiffness modeling of 3-RPS parallel kinematic machine with special composite spherical joints

Cui Xueliang Han Xianguo Chen Wuyi(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China)  
A comprehensive continuous modeling methodology of 3-RPS parallel machine under dynamic load condition was developed and presented by considering the stiffness of legs and joints.The variational Jacobian matrix was used through vector differential and equivalent mechanism technique.Based on the screw theory,the force equation between the dynamic load on the mobile platform and its reaction forces on the legs and joints of the 3-RPS parallel machine was investigated and analyzed.The relationship between the pose(position and orientation) distortion of the mobile platform and the elastic deformation behavior of the legs and joints on 3-RPS parallel machine was established and analyzed by vector differential.A comprehensive dynamic stiffness model of the machine was developed by adding the total differential of the residual forces on the machine system.To validate the methodology,a numerical simulation was carried out.The result shows that the stiffness model of the parallel machine is affected by the outside load and the pose of the mobile platform.There is a large difference between the simple stiffness model and the integrate stiffness model near the workspace boundary of the parallel machine.
【Fund】: 航空科学基金资助项目(20081651025);; 北京市重点实验室资助项目
【CateGory Index】: TP242
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 QIU Xuesong;HOU Yulei;ZENG Daxing;YANG Long;ZHOU Yulin;College of Mechanical Engineering,Yanshan University;;Configuration and synthesis of a group of novelty passive-spherical hinges with large workspace[J];Manufacturing Technology & Machine Tool;2014-10
2 Qiu Xuesong;Yang Long;Hou Yulei;Zhou Yulin;Yanshan University;;Configuration and Workspace Analysis of a Novel Bionic Passive Spherical Hinge with Large Workspace[J];China Mechanical Engineering;2015-03
【Citations】
Chinese Journal Full-text Database 3 Hits
1 ZHAO Tieshi ZHAO Yanzhi BIAN Hui LI Na (College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004);Continuous Stiffness Nonlinear Mapping of Spatial Parallel Mechanism[J];Chinese Journal of Mechanical Engineering;2008-08
2 CHEN Ji-qing,LAN Feng-chong(School of Automotive Engineering,South China University of Technology,Guangzhou 510640,China);Instantaneous Stiffness Analysis and Application in Stewart Parallel Machine Tools[J];Journal of Nanjing University of Science and Technology(Natural Science);2007-04
3 WANG Shi-jun, HUANG Yu-mei (Xi'an University of Technology, Xi'an 710048, China);Determination Method of Branch Stiffness and Load for Parallel Machine Tool[J];Journal of Xi'an University of Technology;2004-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Yu-meng et al(School of Technology,Beijing Forestry University,Beijing 100083);Application for the General Kinematics of 5DOF Picking Robot Manipulator[J];Journal of Anhui Agricultural Sciences;2012-03
2 PENG Sheng-xiang;LI Kai Department of Industrial Design and Information Engineering of Beijing Insititute of Clothing Technology, Beijing 100029, China;Behavior Decomposition of Formation Keeping for Multi-Robot System[J];Journal of Beijing Institute of Clothing;2004-01
3 CHEN Zhi1, WANG Xian-bing1, WANG Xun2, LIU Li2, LUO Yuan-fu2 (1. College of Information & Control Engineering, Southwest University of Science & Technology, Mianyang 621010, China; 2. Southwest Research Institute of Automation, Mianyang 621000, China);Solving Kinematical Equation of 3-Degree of Freedom Based on Product of Exponentials Formula[J];Ordnance Industry Automation;2006-05
4 ZHAI Da-qing (Dept. of Automation Engineering, No.58 Research Institute of China Ordnance Industries, Mianyang 621000, China);Robot Automatic Search Technology for Complicated Unknown Curve Surface of Steam Turbine Vane[J];Ordnance Industry Automation;2006-09
5 ZHANG Xin-yu1,KUANG Yi-shun2(1.School of Applied Science,Jiangxi University of Science &Technology,Ganzhou 341000,China;2.School of Mechanical & Electrical Engineering,Jiangxi University of Science & Technology,Ganzhou 341000,China);Mechanism Design of Multi-Degree-of-Freedom Wall Surface Spraying Robot[J];Ordnance Industry Automation;2009-06
6 FU Hong-ya,SHAO Zhong-xi,LU Hua,LIU Yuan (School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,Heilongjiang,China);Comparison and Post-processing Algorithm for 7 DOF Fiber Placement Machine[J];Acta Armamentarii;2010-06
7 CHEN Zhi-xiang, HUANG Yong, LU Zhen-yang, YIN Shu-yan ( College of Material Science and Engineering, Beijing Polytechnic University, Beijing 100022, China );Kinematic Solution of Arc Welding Robot System[J];Journal of Beijing Polytechnic University;2002-03
8 LIU Xiang-shu,YANG Qing-dong(Department of Mechanical Engineering,Beijing Institute of Machinery,Beijing 100085,China);The development of the control software of the mill robot system based on VC[J];Journal of Beijing Institute of Machinery;2006-01
9 NING Meng,HAO Jing-ru,SUN Jiang-hong(School of Electromechanical Engineering,Beijing Information Science and Technology University,Beijing 100192,China);Kinematic analysis and workspace analysis of a new stable platform[J];Journal of Beijing Information Science & Technology University;2011-01
10 Wang Juan Zhuang Damin(School of Aeronautic Science and Technology,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Human modeling and simulation based on Lagrangian method in weightlessness[J];Journal of Beijing University of Aeronautics and Astronautics;2006-03
China Proceedings of conference Full-text Database 10 Hits
1 Cui Bowen Chen jian Chen Xinzhao;Study on the application of industrial robot to noise measurement[A];[C];2004
2 FANG Hao,LI Lu,JIA Rui,DOU Lihua School of Automation,Beijing Institute of Technology,Beijing 100081,P.R.China;Co-Simulation of Trajectory Tracking Control of Wheeled Mobile Robots with Consideration of Ground Condition[A];[C];2010
3 ZHANG Yunan~1,WANG Shuangshuang~1,ZHANG Jian~1,SONG Jie~2 1.Academy of Armored Force Engineering,Beijing 100072,P.R.China 2.Unit 63985,Beijing 100072;Research on Motion Control of Omnidirectional Platform Based on Virtual Prototyping[A];[C];2011
4 ZANG Qing-Kai, LI Chun-gui, YAN Xiang-lei (Department of Computer Engineering, Guangxi University of Technology, Liuzhou 545006, China);Study on the Simulation of PUMA560 Robot Motion Based on MATLAB[A];[C];2010
5 ;机器人技术的应用与发展[A];[C];2006
6 Dong Xiaoqian Huang Junhui Huang Suping (Electronic&Information Engineering Department,Guangdong AIB Polytechnic College,Guangzhou 510507,China);One Static Path Planning of Intellligent Wheelchair[A];[C];2010
7 Huang Ye Zhang Yan(The Mechanical and Electrical Engineering Collegeof HainanUniversity,Danzhou 571737);Structure and Creative Design for Joint-manipulator[A];[C];2010
8 ;星际探测车自主导航与控制技术研究[A];[C];2007
9 LIU Rong-qiang~(1,2),TIAN Da-ke~(1,2),DENG Zong-quan~(1,2),GUO Hong-wei~(1,2) (1.State Key Laboratory for Robotics and System,Harbin Institute of Technology,Harbin 150001,China; 2.School of Mechanical and Electrical Engineering,Haorbin Institute of Technology,Harbin 150001,China);Analysis on natural vibration characteristics of truss structure for Deployable Truss Antenna[A];[C];2010
10 An Hongmei Lan Jinhui Zhang Zhaohui Wang Zhiliang (University of Science and Technology of Beijing, Beijing 100083, China);Research on the Stepless Speed Regulation System for Mobile Robot[A];[C];2005
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Cai Shengli Bai Shixian ( Department of Basic Science, Beijing Polytechnic University, 100022 );Optimization of Actuating Forces of Redundantly Actuated Planar Parallel Manipulators[J];Journal of Beijing Polytechnic University;1997-02
2 Deng Zhicheng Wang Wei Zong Guanghua(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Active spherical joint for modular reconfigurable mobile robot[J];Journal of Beijing University of Aeronautics and Astronautics;2006-12
3 Zhang Tianming Han Xianguo(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Lightweight and optimal design for 3-RPS parallel kinematic machine based on finite element method[J];Journal of Beijing University of Aeronautics and Astronautics;2010-11
4 Chen Pei Wang Xing (School of Astronautics,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Error model analysis of 2-RSSS spatial mechanism[J];Journal of Beijing University of Aeronautics and Astronautics;2011-03
5 Li Xinyou Chen Wuyi Han Xianguo(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Accuracy analysis and synthesis of 3-RPS parallel machine based on orthogonal design[J];Journal of Beijing University of Aeronautics and Astronautics;2011-08
6 CHEN Li,ZHANG Hong-li(Electric Engineering Academy,Xinjiang University,Urmuq 830047,China);Application of Particle Swarm Optimization on Direct Kinematics of 6-SPS Parallel Manipulators[J];Journal of Chongqing University of Technology(Natural Science);2010-08
7 ZOU Hao, WANG Qi yi, YU Xiao liu, ZHAO Ming yang (1.?School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110006,China;?2.?Shenyang Institute of Automation,CAS, Shenyang 110015,China);Pose Error Analyses of the Stewart Platform[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2000-03
8 LI Shu-jun~1,Clement GOSSELIN~2(1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004 China;2.Department of Mechanical Engineering,Laval University,Quebec G1K 7P4,Canada.);Stiffness Analysis and Stiffness Mapping of 3-RRR Planar Parallel Mechanism Based on CCT Stiffness Matrix[J];Journal of Northe Astern University(Natural Science);2007-01
9 HU Ming,TIAN Wen-yuan,CAI Guang-qi(School of Mechanical Engineering & Automation,Northeastern University,Shenyang 11004,China.);Position Error Analysis of Drive Rod Hinges on a Kind of 3-DOF Parallel Machine Tools[J];Journal of Northeastern University(Natural Science);2007-03
10 LI Shu-jun1,2,MENG Qiao-ling1(1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China;2.State Key Laboratory of Robotics,Shenyang 110016,China.);Stiffness Characteristics of 3-PRR Planar Parallel Mechanism Based on CCT Stiffness Matrix[J];Journal of Northeastern University(Natural Science);2009-06
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Yue shigang; Yu Yueqing; Bai Shixian(Department of Basic Science, Beijing Polytechnic University, 100022 );The Study of the Dynamic Equations and Numeral Simulation of Flexible Manipulator with Elastic Joint[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1995-04
2 WU Zhi gang, YIN Li zhong, WANG Ben li (Dept. of Astronautics and Mechanics, Harbin Institute of Technology, Harbin 150001, China);Identification of joint stiffness by inverse of partial differential equations[J];JOURNAL OF HARBIN INSTITUTE OF TECHNOLOGY;2000-02
3 Chen Jiqing Chen Bingchong Ning Sujian Zhang Shujun (College of Automotive Engineering,Jilin University of Technology);Virtual Axis Hexapod Machine Centres and the Method for Stiffness Analysis[J];Journal of Jilin University of Technology;1998-04
4 Yu Jingjun,Bi Shusheng,Zong Guanghua (Beijing University of Aeronautics and Astronautics) Yu Bao (Daqing Petroleum Institute);ANALYSIS FOR THE STATIC STIFFNESS OF A 3DOF PARALLEL COMPLIANT MICROMANIPULATOR[J];Chinese Journal of Mechanical Engineering;2002-04
5 ZhangLong ZhangYouliang WangHuakun (School of Mechanics,NUST,Nanjing 210094);Error Analysis of the Virtual-axis Machine Tool[J];Journal of Nanjing University of Science and Technology;2001-02
6 ZHANG Hua, LI Yuwen, WANG Liping, TANG Xiaoqiang(Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China);Stiffness analysis of gantry hybrid machine tools[J];Journal of Tsinghua University(Science and Technology);2004-02
7 LI Jia, CHEN Ken, DONG Yi, ZHANG Bopeng Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China;Study on the static stiffness of the parallel flexure joint robot[J];JOURNAL OF TSINGHUA UNIVERSITY(SCIENCE AND TECHNOLOGY);1999-08
8 Shen Longji; Fang Minglun; Zhu Chuanbiao; Yang Hongfu (School of Mechanical and Electronic Engineering, Shanghai University);The Influence of the Rigidity of Joints of 5R Robot on Dynamic Performance[J];JOURNAL OF SHANGHAI UNIVERSITY(NATURAL SCIENCE EDITION);1996-06
9 Yang Bingyuan Yang Hua Song Weili (8th Design Department, Shanghai Academy of Spaceflight Technology Shanghai,200233);A Direct Method of Parameter Identification for Joining Stiffness on Substructure Interfaces[J];JOURNAL OF VIBRATION ENGINEERING;1997-03
10 LI Runfang (Chongqing University,Chongqing,China)HAN Xi LIN Tengjiao TAO Zeguang;Joint Structure Dynamic Parameter Identification for Gear Transmission System[J];China Mechanical Engineering;2001-12
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved