Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of University of Science and Technology Beijing》 2005-02
Add to Favorite Get Latest Update

Dynamical microstructure evolution of Q235 low carbon steel during high temperature deformation

ZHANG Maicang, DONG Jianxin, ZENG Yanping, SUN Ying, YANG Zhongmin Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China Division of Structure Materials, Central Iron and Steel Research Institute, Beijing 100081, China  
The dynamical microstructure evolution behavior of Q235 low carbon steel at high temperature was systematically investigated through physical simulated tests carried out on a Gleeble 2000 machine. The experimental results showed that hot working parameters such as forming temperature and strain rate affected the dynamical micro-structure evolution behavior of Q235 steel to a great extent. At a given temperature, dynamical recrystalization could be postponed with the increasing of strain rate; meanwhile, at a lower strain rate, this phenomenon could occur with the decreasing of temperature. The quantitative metallurgical technique and the linear/non-linear regression analysis were used to construct an Arrhenius-type phenomenological constitutive relationship and a Yada-type kinetically microstructure equation of Q235 steel at high temperature, which were coupled into the finite element software of Autoforge 3.1. The results of numerical simulation showed that the phenomenological constitutive relationship and microstructure evolution equation depicted the dynamical microstructure evolution behavior of Q235 low carbon steel at high temperature very well.
【Fund】: 国家"973"项目(No.G1998061501)
【CateGory Index】: TG115
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 6 Hits
1 CAO Jie1,YAN Jun1,LIU Ya-zheng2,ZHANG Jing1,SUN Wei3(1.School of Materials Science and Engineering,Anhui University of Technology,Ma′anshan 243002,Anhui, China;2.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;3.Ma′anshan Iron and Steel Co Ltd,Technology Center,Ma′anshan 243000,Anhui,China);Analysis on Dynamic Recrystallization Behavior of Bainitic Non-Quenched and Tempered Steel for Fasteners[J];Journal of Iron and Steel Research;2012-10
2 LI JianFeng 1 , SONG MaoShuang 1 , SHAO TongBin 1,2 , XIA Ying 1,2 , ZHANG GuiNan 1,2 , ZHOW Wei 1,2 , CHEN Xue Fei 1,2 & WANG Qian 1 1 State Key Laboratory of Isotope Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640, China; 2 University of Chinese Academy of Sciences, Beijing 100049, China;Experimental study and prediction of deformation behavior of low carbon steel at low strain rate and high temperature[J];Chinese Science Bulletin;2013-10
3 LIAO Shu-lun1,2 ZHANG Li-wen1,2 YUE Chong-xiang1,2 PEI Ji-bin1,2(1.State Key Laboratory for Materials Modification by Laser,Ion and Electronic Beam,Dalian University of Technology,Dalian 116023 China)(2.School of Materials Science and Engineering,Dalian University of Technology,Dalian 116023 China) GAO Hui-ju3 GUO Shu-qi3(3.Northeast Special Steel Group,Dalian 116031 China);Experimental research and numerical simulation of dynamic microstructure evolution of GCr15 steel[J];Journal of Plasticity Engineering;2008-04
4 GAN Xiaolong;YUE Jiangbo;DU Tao;WEN Zhen;CHEN Zihong;ZHANG Qing;Research and Development Center of Wuhan Iron and Steel (Group) Corp;;Study on Strengthening and Toughening Mechanism of Ti and Nb Micro-alloyed Steel[J];Hot Working Technology;2013-22
5 HUANG Li-ying(Xingtai Polytechnic College,Xingtai,Hebei 054035,China);Effect of Hot-deformation Processes and Cooling Rateon Grain Size of Q235 Steel[J];Journal of Xingtai Polytechnic College;2010-05
6 WANG Xiao-dong 1 , 2 , LI Fei 1 , JIANG Zheng-yi 2 ( 1.Shougang Research Institute of Technology , Shougang Group , Beijing 100043 , China ; 2.Faculty of Engineering , University of Wollongong , Wollongong NSW 2522 , Australia );Thermal , Microstructural and Mechanical Coupling Analysis Model for Flatness Change Prediction During Run-Out Table Cooling in Hot Strip Rolling[J];钢铁研究学报(英文版);2012-09
【Citations】
Chinese Journal Full-text Database 2 Hits
1 QI Junjie, YANG Wangyue, SUN Zuqing Material Science and Engineering of School , UST Beijing, Beijing 100083, China The State Key Laboratory for Advanced Metals and Materials 2, Beijing, 100083, China;Mechanisms of Microstructure Evolution during Deformation of Undercooled Austenite in a Low Carbon Steel[J];Journal of University of Science and Technology Beijing;2002-02
2 ZHAO Lei, ZHENG Weiwei YANG Wangyue,SUN Zuqing Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China The State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China;Microstructure Evolution and Properties of Q235 Plain Carbon Steel in Multi-pass Hot Deformation[J];Journal of University of Science and Technology Beijing;2004-05
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LEI Kai gui,DENG Zi chen (Department of Engineering Mechanics,Northwestern Polytechnical University,Xi'an 710072,China);Finite element static analysis for multi-layer steel-sticked reinforced concrete beam[J];Building Science Research of Sichuan;2003-01
2 LEI Kaigui1,DENG Zichen1,CHEN Shunxiang2(1.Department of Engineering Mechanics,Northwestern Polytechnical University,Xi'an710072,China;2.The Second Artillery Engineering College,Xi'an710025,China);Dynamic finite element model and analysis for steel-sticked reinforced concrete beam[J];Building Science Research of Sichuan;2003-03
3 GONG Ni-na~1,LIU Xi-la~2(1.Department of Civil Engineering,Tsinghua University,Beijing 100084,China;2.Department of Civil Engineering,Shanghai Jiaotong University,Shanghai 200030,China);Concrete failure criterion under freeze-thaw condition in structural engineering[J];Building Science Research of Sichuan;2005-06
4 WANG Li-yan,YUAN Xin-ming(College of Hydraulic Science and Engineering,Yangzhou University,Yangzhou 225009,China);The elastic and plastic analysis of static and dynamic characters of steel silo with stored materials acting on its wall[J];Sichuan Building Science;2006-03
5 Wu Yiping;Shi Zhanhua;Li Xizhang;Xiao Zhongyi Huazhong University of Science and Technology;THE ANALYSIS AND MEASUREMENT OF TEMPERATURE OF THERMAL WEAR SURFACE[J];;1988-02
6 LI Chuan-Rui,WANG Li-tao,GE Ren-Yu,YU Xiao-Lu,CHEN Zhi-Hao(Dept.of Mech.Engn.,Anhui University of Technology and Science,Wuhu 241000,China);Finite element analysis of deformation during continuous rolling on CSP[J];Journal of Anhui University of Technology and Science(Natural Science);2008-04
7 CHEN Yan,LIU Ning(College of Civil Engineering,Hehai Univ., Nanjing,210098,China);THE COMPARISON OF THE SCHEMES IN RUNYANG BRIDGE’S NORTH ANCHOR[J];Journal of Anhui Institute of Architecture;2004-01
8 XIE Yu-fang(Baosteel Engineering & Technology Group Co.,Ltd,Shanghai,201900);Research on moment transfer mechanism of ring-beam joint connecting CFT column and RC beam[J];Journal of Anhui Institute of Architecture & Industry(Natural Science);2012-02
9 LI Yuan-peng1,SONG Lian-hao2(1.School of Civil and Hydraulic Engineering,Hefei University of Technology,Hefei 230009,China; 2.China's Automobie Industry Engineering Company,Tianjin 300190,China);The study of model similarity relation based on MSC.Marc[J];Journal of Anhui Technical College of Water Resources and Hydroelectric Power;2011-04
10 (XIANG An-tian,ZHU He-hua,DING Wen-qi,JIA Ming-hui(Geotechnic Engineering Institute of Tongji University,Shanghai 200092,China);Mouth Slope Failure Mechanism of Shallow Embedded and Double-arch Tunnel with Partial-pressure[J];Chinese Journal of Underground Space and Engineering;2008-01
China Proceedings of conference Full-text Database 10 Hits
1 XU CHUNTING,LI PING,XUE KEMINAND ZHOU MINGZHI(School of Materials Science and Engineering,HeFei University of Technology,230009);SIMULATION ANALYZE ON TUBE BALL SPINNING[A];[C];2004
2 MA Fei~1,ZHANG Dong-sheng~2,ZHANG Xiao-chun~1 (1.Transportation College,Southeast University,Nanjing 210096,China:2.School of Mineral & Safety Engineering,China University of Mining and Technology,Xuzhou 221008,China);Research on properties of the filled body based on the deformation control[A];[C];2007
3 BIAN Lin,LI Shao-peng,GE Rui,YANG Huan (Institute of High Energy Physics,Chinese Academy of Sciences,Beijing 100049,China );Static thermal load analysis for EXFEL cryostat[A];[C];2009
4 CHEN Yong~1 FANG Liang~(1,2) ZHANG Shu-fang~1 DONG Jian-xin~1 GAO Ling~1 (1.Department of Applied Physics,Chongqing University,Chongqing 400044,China;2.Key Laboratory of Optoelectronic Technology and Systems of the Education Ministry of China,Chongqing University,Chongqing 400044,China);Study on effect of AIN thin films on thermolysis property of LED[A];[C];2007
5 Sidong LIU1,Xinfeng LI1,Xuemin CUI1,Haifeng LIU2,Qi CHAO2 1 School of Chemistry and Chemical Engineering,Guangxi University,Nanning,China,530004 2 Qi-li New Materials Science and Technology Limited Company of Guangxi,Beihai,China,536000;Research on Preparation and Properties of Reflective and Heat Insulation Coatings Based on Geopolymer[A];[C];2011
6 Hu Chengliang, Liu QuanKun, Wang Qiang, Sun Zhengmao (Hefei University of Technology 230009);Three-dimensional simulation and experiment of the cold forging of spur gear[A];[C];2005
7 Lin Bing1,Jin Xiaofei1,Sun Pengcheng1,Wu Julong2,Feng Guojun2(1.China State Construction Engineering Corporation Ltd. Technical Center, Beijing 101300, China;2. China Construction Industrial Equipment Installation Co., Ltd.,Nanjing,Jiangsu 210046,China);Study on the Solar Temperature Field of the Grid Roof Structure of Nanjing Railway South Station Under Open-air Construction[A];[C];2012
8 Zou Ming~1 Li Longfei~1 Sun Zuqing~1 Yang Wangyue~2 (1.The State Key Laboratory for Advanced Metals and Materials University of Science and Technology Beijing,Beijing,100083;2.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing,100083);Deformation Behaviors of Austenite in a Low Carbon Steel under Various Conditions[A];[C];2009
9 WANG Ming-wei~(1,2) ZHANG Li-wen~(1,2) PEI Ji-bin~(1,2) LI Chen-hui~3 ZHANG Fan-yun~3 (1.State Key Laboratory for Materials Modification by Laser,Ion and Electron Beams,Dalian 116085,China; 2.School of Material Science and Engineering,Dalian University of Technology,Dalian 116085,China; 3.Shenyang Liming Aero-Engine Group Corporation,Shenyang 110043,China);FE simulation of vacuum hot bulge forming of titanium alloy and model optimization[A];[C];2007
10 ZHANG Jinfeng~1,XIAO Henglin~2 (1.Hubei institute of Survey and Design for Water Resources and Waterpower Engineering,Wuhan,Hubei 430064,China; 2.Institute of Geotechnical Engineering and Underground Construction,School of Civil Engineering and Architecture,Hubei University of technology,Wuhan,Hubei 430068,China);NUMERICAL SIMULATION OF FRP SCREW PLATE ANCHOR IN-SITU TEST[A];[C];2010
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Wang Jinwen (Anhui Institute of Mechanical and Electrical Engineering Wuhu 241000) Wang Xiongwen (Wuhu Vocational Institute of Technology Wuhu 241000) Ma Benji (Hefei Switch Gear Factory HeFei 230001);Effect of Medium Temperature Deformation on Refinement of Carbon Steel Structure[J];JOURNAL OF ANHUI INSTITUTE OF MECHANICAL AND ELECTRICAL ENGINEERING;1999-04
2 ZHENG Fang SONG Hong-mei (Baosteel Technology Center,Shanghai China,201900);Typical Applications and Functional Development of Gleeble 3800 at Baosteel[J];Bao Steel Technology;2003-05
3 SONG Hong-wei SHI Bi WANG Cong ZHANG Jun-bao LI Jian JI Si-kai CAO Han-qing (Baosteel Technology Center,Shanghai 201900,China);Microstructural Characteristics of Submicro-Steel with Nano-Precipitates[J];Bao Steel Technology;2005-01
4 Zhang Yan; Dang Zijiu(State Key Laboratory For Advanced Metals and Materials,UST Beijing, Bejing 100083,China);Influence Factors of Measuring Stress-Strain Curves[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1997-01
5 FU Yunyi; YANG Ping; YAng Wangyue; SUNZuqing (Material Science and Engineering School, UST Beijing, Beijing 100083,China SUNZuqing State Key Laboratory for Advanced Metals and Materials, UST Beijing, Beijing 100083, China);Characterization of Strain Induced Ferrite Formed in Coarse Austenite Grained Q235 Steel[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;2000-02
6 LI Longfei, YANG Wangyue, SUN Zuqing,WANG Qingfeng (Material Science and Engineeing SchooL UST Beijing, Beijing 100083, China ;The State Key Laboratory for Advanced Metals and Materials, Beijing 100083, China ;Steel research institute, Wuhan steel & i;Deformation Characteristics of a Plain Carbon Steel in Ferrite Phase Range[J];Journal of University of Science and Technology Beijing;2001-03
7 ZHAO Lei, ZHENG Weiwei YANG Wangyue,SUN Zuqing Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China The State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China;Microstructure Evolution and Properties of Q235 Plain Carbon Steel in Multi-pass Hot Deformation[J];Journal of University of Science and Technology Beijing;2004-05
8 DU Zhongze,CAO Xiaofang,FU Hanguang,WANG Jingtao,ZHAO Xicheng Metallurgical Engineering School, Xi'an University of Architecture and Technology, Xi'an 710055, China Key Laboratory for Advanced Manufacturing by Materials Processing Technology, Ministry of Education, Tsinghua University, Beijing 100084, China;Structure transformation rule of ECAP-deformed low carbon steel[J];Journal of University of Science and Technology Beijing;2006-05
9 WANG Danmin 1), LI Huade 1), ZHOU Jianlong 2), MEI Bing 2)1) Information Engineering School, University of Science and Technology Beijing, Beijing 100083, China 2) Handan Iron and Steel Group Corporation, Handan 056015, China;Quality prediction model of the mechanical properties of hot-rolled steel strips and its application[J];Journal of University of Science and Technology Beijing;2006-07
10 TAN Hongfeng1),YANG Wangyue1),CHEN Guoan2)1)School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China 2)State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China;Effect of initial microstructure on the microstructure evolution of medium carbon steel during warm deformation[J];Journal of University of Science and Technology Beijing;2008-04
【Secondary References】
Chinese Journal Full-text Database 6 Hits
1 WANG Pei-qi1,2,ZHANG Qin-he1,2,MA Ru-po1,2,DONG Bao-tian1,2(1.School of Mechanical Engineering,Shandong University,Jinan 250061,China;2.Research Center of Metallurgical Equipment and Process Digitalization System of Shandong Province,Jinan 250061,China);Development of simulation system for large H-beam hot rolling based on ABAQUS[J];Forging & Stamping Technology;2012-06
2 ZHAO Ze-bo,ZANG Yong,WANG Ting-ting,ZHOU Hao(School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China);High Temperature Flow Stress Model of Carbon Steel[J];Journal of Beijing University of Technology;2013-08
3 CAO Jie~1,TANG Guang-bo~2,YAN Jun~1,ZHANG Jing~1 (1.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083, China;2.School of Materials Science and Engineering,Anhui University of Technology,Ma'anshan 243002, China;3.Institute of Structural Materials,Central Iron and Steel Research Institute,Beijing 100081,China);Experimental Research and Numerical Simulation of Dynamic Recrystallization of C-Mn Steel during Single Compression Test[J];Journal of Anhui University of Technology(Natural Science);2010-03
4 Ao Ying;Wang Hongbin;School of Materials Science and Engineering,Shanghai University;Shanghai Engineering Technology Research Center of Special Casting;;Influence of warm-forming parameters on grain size and uniformity of hot heading GCr15 steel ball-billet[J];Heat Treatment of Metals;2014-12
5 XIAO Zhiling;LIU Baixuan;LIU Hua;WANG Jinbao;Metal Plasticity Forming Division, Zhengzhou Research Institute of Mechanical Engineering;School of Mechanical Engineering, Zhengzhou University;;Numerical Simulation and Microstructure Evolution on Multi-station Cold Heading of Pin[J];Hot Working Technology;2014-17
6 GUO Fei1,ZHAO Xian-ming1,WANG Li-na1,WU Di1,WANG Guo-dong1,NING Zhong-liang2 (1.State Key Laboratory of Rolling and Automation,Northeastern University,Shenyang 110819,Liaoning,China; 2.Fushun New Iron and Steel Company Ltd.,Fushun 100044,Liaoning,China);Effect of Controlled Cooling on Microstructure and Mechanical Properties of H-Beam[J];钢铁研究学报(英文版);2013-08
【Secondary Citations】
Chinese Journal Full-text Database 5 Hits
1 QI Junjie, YANG Wangyue, SUN Zuqing Material Science and Engineering of School , UST Beijing, Beijing 100083, China The State Key Laboratory for Advanced Metals and Materials 2, Beijing, 100083, China;Mechanisms of Microstructure Evolution during Deformation of Undercooled Austenite in a Low Carbon Steel[J];Journal of University of Science and Technology Beijing;2002-02
2 YANG Wangyue, HU Anmin, QI Junjie, SUN Zuqing (School of Materials Science & Engineering; The State Key Laboratory for Advanced Metals and Materials, University of Science & Technology Beijing, 100083 Beijing);MICROSTRUCTURE REFINEMENT OF DEFORMATION-ENHANCED TRANSFORMATION IN LOW CARBON STEEL[J];Chinese Journal of Material Research;2001-02
3 YANG Wangyue; HU Anmin; SUN Zuqing (State Key Laboratory for Advanced Metals and Materials, University of Science & Technology Beijing, Beijing 100083);EFFECT OF AUSTENITE GRAIN SIZE ON STRAIN ENHANCED TRANSFORMATION IN A LOW CARBON STEEL[J];ACTA METALLRUGICA SINICA;2000-10
4 YANG Ping, FU Yunyi, CUI Feng'e, SUN Zuqing (School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 ;State Key Laboratory for Advanced Metallic Materials, University of Science and Technology Beijing, Bei;HARACTERISTICS OF STRAIN ENHANCED TRANSFORMATION AND ITS INFLUENCING FACTORS IN Q235 PLAIN CARBON STEEL[J];Acta Metallrugica Sinica;2001-06
5 QI Junjie, YANG WangyueSchool of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083SUN ZuqingThe State Key Laboratory for Advanced Metals and Materials, University of Science and Technology, Beijing 100083;ULTRA-FINE FERRITE FORMATION DURING DEFORMATION OF UNDERCOOLED AUSTENITE IN A LOW CARBON STEEL[J];Acta Metallrugica Sinica;2002-09
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved