Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of University of Science and Technology Beijing》 2007-12
Add to Favorite Get Latest Update

Modeling and torsional vibration simulation of involute spur gears with asymmetric teeth

WANG Xiaoqun,SUN Ping,LI Wei Mechanical Engineering School,University of Science and Technology Beijing,Beijing 100083,China  
In order to research the dynamics characteristics of involute spur gears with asymmetric teeth,a dynamic model based on virtual prototyping was proposed by setting up an equivalent kinetic model for torsional vibration of asymmetric gears.With this model,the time and frequency domains of vibration characteristic were analyzed taking account of the influence of time-variant mesh stiffness and mesh damping in the course of meshing.These results were compared with numerical simulation and experimental results.It is shown that this simulation method consists with the numerical simulation and experimental method.
【Fund】: 国家自然科学基金资助项目(No.50575021)
【CateGory Index】: TH132.41
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 WANG Chao,SHAO Pengli (Dept. of Whole Tech. ,China North Vehicle Research Institute,Beijing 100072,China);Finite element dynamics analysis and simulation on gear transmission based on LS_DYNA[J];Computer Aided Engineering;2010-02
2 ZHU Xu-hui;Hangzhou Applied Acoustics Research Institute;;Dynamic Simulation of Asymmetric Involute Spur Gear Transmission with ADAMS[J];Mechanical & Electrical Engineering Technology;2014-08
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Hong Qingquan Cheng Ying (Beijing Institute of Technology, Beijing, 100081);A GEAR PAIR MODEL AND ITS APPLICATION IN THE SOFTWARE ADAMS[J];Acta Armamentarii;2003-04
2 LOU Yizhi, WANG Xiaoqun, LI Wei Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Dynamics analysis of involute gears with asymmetric teeth[J];Journal of University of Science and Technology Beijing;2005-03
3 FAN Zhi min 1,ZHANG Guang hui 2 ( 1Qingdao Institute of Chemical Technology,Qingdao 266042; 2Chongqing University,Chongqing 400044);Experimental Research on the Vibration Characteristics of Double Involute Gears[J];Mechanical Science and Technology;2002-05
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 YU Zhen1, SHEN Chen-lin2,CHEN Xue-hui1(1.College of Mechanical & Electric Engineering,Anhui Institute of Architecture and Industry,Hefei 230601,China;2.Intelligent Manufacturing & Controlling Institute,Wuhan University of Technology,Wuhan 430063,China);Research of kinematics simulation for planetary gear reducer based on ADAMS[J];Journal of Anhui Institute of Architecture & Industry(Natural Science);2009-05
2 Zhang Haiyun et al.(College of Mechanical and Electrical Engineering,Shihezi University,Shihezi 832003,China);Hopper's Modeling and Simulation of Rubber-bar Roller of Cotton harvester[J];Anhui Agricultural Science Bulletin;2011-21
3 WANG Yu et al (Department of Mechanical Engineering,Hebei institute of Mechanical and Electronic Technology,Xingtai,Hebei 054048);Research On Application of Binding Machine Of Wheat Straw In Virtual Prototyping Technology[J];Journal of Anhui Agricultural Sciences;2009-24
4 FAN Ai-qiong(College of Preparatory Education,Guangxi University for Nationalities,Nanning,Guangxi 530006);Phantom Study on Physical Amortization of Agricultural Vehicle Based on the Air Spring[J];Journal of Anhui Agricultural Sciences;2010-15
5 WANG Yu(Department of Mechanical Engineering,Hebei Institute of Mechanical and Electronic Technology,Xingtai,Hebei 054048);Trajectory Planning and Motion Simulation of Rice Transplanter Transplanting Mechanism[J];Journal of Anhui Agricultural Sciences;2011-15
6 GE You-gang,JIA Zhi-xuan,LI Jie,DONG Yong-fu (Mechanical & Engineering College,Taiyuan University of Science & Technology,Taiyuan 030024,China);Simulation and analysis of vehicle frequency response based on ADAMS/Car[J];Journal of University of Science and Technology Liaoning;2012-01
7 Cao Mo Jing Zuojun Sun Dehui(Col.of Mechanical and Electronical Engineering,North China Univ.of Tech.,100144,Beijing,China);Kinematics and Dynamics Simulation Analysis of Explosion-proof Pan/Tilt Based-on ADAMS[J];Journal of North China University of Technology;2010-01
8 Zhao Yuxia Gao Dewen He Guangping(Col.of Mechanical and Electronical Engineering,North China Univ.of Tech.,100041,Beijing,China);Simulation Analysis and Kinematics Modeling of Wheeled Mobile Robot in Round Pipe[J];Journal of North China University of Technology;2010-03
9 WU Zhong1,PANG Xiao-hong2(1.Seamless Tube Plant of Steel Union Co.Ltd.of Baotou Steel(Group)Corp.,Baotou 014010,Nei Monggol,China;2.Design and Research Institute of Baotou Steel(Group) Corp.,Baotou 014010,Nei Monggol,China);Calculation and Research on Contact Stress of Unsymmetric Tooth Profile and Gear with Double Pressure Angles[J];Science & Technology of Baotou Steel;2010-05
10 LI Jun,ZHANG Hongkang,MENG Hong,TANG Rui(China North System Engineering Institute, Beijing 100089,China);Research of Tracked Vehicle Compliance Simulation[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2003-04
China Proceedings of conference Full-text Database 10 Hits
1 ZHAO Jingyi ZHANG Jianfu CHENG Fei YANG Fan (Mechanical Engineering College,Yanshan University,Qinhuangdao,Hebei,066004);Optimization Design of self-propelled Pallet Transporter' Steering Mechanisms Based on ADAMS[A];[C];2011
2 ;精密空气静压导轨组件传动系统的设计与分析[A];[C];2011
3 Hu Ying,Wu Defeng Automation Research Center,Dalian Maritime University,Dalian 116026,P.R.China;On Kinematics of a Flexible Inspection Robot[A];[C];2008
4 Yuan Chi1,Jia Yu1,2,Enchen Jiang1,3(1.Northeast Agricultural University College of Engineering,Harbin 150030;2.China National Heavy Machinery Research Institute Co,Ltd,Xian 710032 3.South China Agricultural University College of Engineering,Guangzhou 510642);Kinematic simulation of the differential steering mechanism based on ADAMS[A];Chinese Society of Agricultural Engineering[C];2011
5 He Jiannan,Wang Jinwu ,Wang Jinfeng(School of Engineering,Northeast Agricultural University,Harbin 150030,China);Mechanism analysis and design of planetary pricking hole mechanism with congruent elliptic gears[A];Chinese Society of Agricultural Engineering[C];2011
6 XU Pei-Min1,SHI Zhen-Qiang1,BAO Jia-Han1 WANG Hong-Guang2 (1.School of Mechanical Engineering, Anhui University of Technology, Maanshan, 243002, China; 2.Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, 110016, China);Rigid-Flexible Coupling Modeling and Analysis of Rocker-Bogie Rover[A];[C];2007
7 PENG Xu–yang,ZHANG Zhi–fei,WANG Yuan,ZHAO Wei (The College Of Mechanical Engineering, Chongqing University, Chongqing 400030, China);The Design of Motorcycle Engine Mounting System Based on ADAMS[A];[C];2007
8 Hu Wengang1,Sun Beibei 1,Gao Ye 2Zhang Xiaowei 2 (1.School of Mechanical Engineering,Southeast University,Nanjing 210096,China; 2 Xuzhou Construction Machinery Group.Co.Ltd.,Xuzhou 221004,China);Multi-body Dynamics Simulation and Optimization on Working Device of Skid Steer Loader[A];[C];2009
9 Xia Tangzhong,Wang Pingping,Yu Xianxiang,Zhu Xinliang;Gas Spring of Engine Hood Optimization Based on MSC.ADAMS/Insight[A];[C];2009
10 QIAN Guang,HUANG Mei-fa,LUO Wei-zhao (School of Mechanical and Electrical Engineering,Guilin University of Electronic Technology,Guilin 541004,China);Design and Kinematics Analysis of a MSW Sorting Mechanism[A];[C];2011
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Hao Ruixian1,Li Wei2,Li Yuanzong1(1.School of Mechanical Engineering,Taiyuan University of Technology,Taiyuan 030024,China;2.School of Mechanical Engineering,Beijing University of Science and Technology,Beijing 100083,China);APPLICATION OF ASYMMETRICAL PROFILE IN INVOLUTE PLASTIC GEAR[J];Engineering Plastics Application;2008-01
2 Chai Chang (Department of Machinery Engineering);ABOUT INFLUENCE OF TRANSFER RATE ON GEAR TRANSFER FORCE, RELATIVE SLIDE AND WEAR[J];;1996-01
3 WU Zhong1,PANG Xiao-hong2(1.Seamless Tube Plant of Steel Union Co.Ltd.of Baotou Steel(Group)Corp.,Baotou 014010,Nei Monggol,China;2.Design and Research Institute of Baotou Steel(Group) Corp.,Baotou 014010,Nei Monggol,China);Calculation and Research on Contact Stress of Unsymmetric Tooth Profile and Gear with Double Pressure Angles[J];Science & Technology of Baotou Steel;2010-05
4 LI Xiu-lian1,2 (1.School of Automobile and Traffic Engineering,Jiangsu University,Zhenjiang 212013,Jiangsu,China;2.School of Mechanical Engineering,Jiangsu Teachers University of Technology,Changzhou 213001,Jiangsu,China);Calculation of Bending Fatigue Strength of Helical Gear Tooth Root Based on Ship Hull Deformation and Interteeth Friction[J];Acta Armamentarii;2008-08
5 WU Zhi-fei,WANG Tie,ZHANG Rui-liang(College of Mechanical Engineering,Taiyuan University of Technology,Taiyuan 030024,Shanxi,China);Experimental Study of Contact Fatigue Property for 18Cr2Ni4WA Gears[J];Acta Armamentarii;2010-05
6 LOU Yizhi, WANG Xiaoqun, LI Wei Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Dynamics analysis of involute gears with asymmetric teeth[J];Journal of University of Science and Technology Beijing;2005-03
7 XIAO Wangqiang, LI Wei, Han Jianyou, Duan MingnanMechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Transmission contact analysis of the unsymmetric gear with double pressure angles[J];Journal of University of Science and Technology Beijing;2006-12
8 LI Wei, LIU Yanjun, QIU Lifang, WANG XiaoqunMechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Theory and method of hob design for a new-style asymmetric gear[J];Journal of University of Science and Technology Beijing;2007-08
9 WU Zhong (Seamless Tube Plant,Baotou Iron and Steel (Group)Co.,Baotou 014010,China);A calculation research on the tooth root bending stress ofasymmetrical involute gear[J];Journal of Baotou University of Iron and Steel Technology;2004-01
10 WU Zhong(Seamless tube Plant,Baotou Iron and Steel (Group)Corporation,Baotou 014010,China);The investigation for the profile of asymmetrical involute gear[J];Journal of Baotou University of Iron and Steel Technology;2004-02
【Secondary References】
Chinese Journal Full-text Database 8 Hits
1 LI Xiu-lian,ZHAO Jing-bo,HE Qing,LIU Wei,WANG Yi-xin,WANG Jiang-tao,TANG Hao(School of Mechanical and Automobile Engineering,Jiangsu Teachers University of Technology,Changzhou 213001,China);Analysis of Sliding Coefficient on Asymmetric Gear Teeth Outline With Double Pressure Angles[J];Journal of Jiangsu Teachers University of Technology;2012-04
2 LIU Yang,WEI Xin,WEI Liang(Faculty of Mechanical and Electric Engineering,Guangdong University of Technology,Guangzhou510006,China);Finite Element Dynamics Analysis and Simulation on Procedure of Mounting of E Type Circlip Based on LS_DYNA[J];Mechanical & Electrical Engineering Technology;2012-09
3 Zhao Xianfeng1,2 Shi Hongyan1 He lin1,2(1 School of Mechanical Engineering,Guizhou University,Guiyang 550025,China)(2 National Precision Micro &Special Motor Engineering Technology Research Center,Guiyang 550008,China);Research on Dynamic Contact of Micro Gear Meshing Process[J];Journal of Mechanical Transmission;2012-12
4 HUANG Xiu-jin;HE Li-dong;XIA Xue-ran;Beijing Key Laboratory of Health Monitoring and Self-recovery for High end Mechanical Equipment,Beijing University of Chemical Technology;;Experimental study on vibration reduction for gear shafting with viscous damper mounted on the driven shaft[J];Journal of Mechanical & Electrical Engineering;2014-12
5 Huang Xiujin;He Lidong;Xia Xueran;Liu Ming;Beijing Key Laboratory of Health Monitoring and Self-recovery for High end Mechanical Equipment,Beijing University of Chemical Technology;China Petroleum Planning and Engineering Institute;;Experimental Study of Viscous Damper Vibration Reduction Technology of Gear Shafting[J];Journal of Mechanical Transmission;2015-02
6 CHENG Jian-qun;Department of Mechanical and Electrical Engineering, Suzhou Chien-shiung Institute of Technology;;Research on the Mathematical Model of Involute Tooth Profile Curve[J];Mechanical & Electrical Engineering Technology;2015-07
7 LIU Yong-can,WU Feng-lin,LAN Ming,REN Jie ( College of Mechanical Engineering,Taiyuan University of Technology,Taiyuan 030024,China);Dynamic Contact Simulation Analysis of Involute Gear with ANSYS/LS-DYNA[J];Mechanical Engineering & Automation;2011-05
8 Feng Liyan;Huang Jingwei;Liu Yingjuan;Du Yuhao;Xie Wenzhi;;Ansys /LS-DYNA-based dynamic contact simulation analysis for curve-tooth bevel gear[J];Hoisting and Conveying Machinery;2014-10
China Proceedings of conference Full-text Database 1 Hits
1 Huang Xiujin;He Lidong;Xia Xueran;Beijing Key Laboratory of Health Monitoring and Self-recovery for High end Mechanical Equipment,Beijing University of Chemical Technology;;Experimental Study on Vibration Reduction for Gear Shafting with Viscous Damper Mounted on the Driven Shaft[A];[C];2014
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 FAN Zhi min 1,ZHANG Guang hui 2 ( 1Qingdao Institute of Chemical Technology,Qingdao 266042; 2Chongqing University,Chongqing 400044);Experimental Research on the Vibration Characteristics of Double Involute Gears[J];Mechanical Science and Technology;2002-05
2 LIUXiao -xuetal (SichuanInstituteofLightIndustryand ChemicalTechnology);An approximate method for calculating the dynamic load of gears[J];MACHINE DESIGN;2000-09
3 Zhang Guangliui; Xu Hongbin; Long Hui(Chongqing University);DOUBLE INVOLUTE GEAR WITH LADDER SHAPE OF TOOTH[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;1995-06
4 Wang Lihua(Chongqing University,Chongqing,China) Li Runfang Lin Tengjiao Yang Chengyun p 1143 1146;Research on Nonlinear Vibration Characteristics due to Time-varying Mesh Stiffness and Gear Backlash in Gear System[J];China Mechanical Engineering;2003-13
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved