Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of University of Science and Technology Beijing》 2007-S2
Add to Favorite Get Latest Update

Effects of annealing temperature on microstructures and properties of the 25Mn-3Si-3Al-TWIP steel

MI Zhenli,TANG Di,DAI Yongjuan,WANG Haiquan National Engineering Research Center for Advanced Rolling technology,University of Science and Technology Beijing,Beijing 100083  
The influence of annealing temperature on microstructures and mechanical properties of the 25Mn-3Si-3Al-TWIP steel was studied in this paper.The results showed that the steel had better comprehensive mechanical properties when the annealing temperature was 1 000 ℃.The tensile strength of the steel is about 640 MPa and the yield strength is higher than 255 MPa,while the elongation is above 82%.The microstructure is composed austenitic matrix and annealed twins at room temperature,at the same time,a significant amount of annealed twins and stacking faults are observed by TEM.Mechanical twins play a dominant role during deformation and result in excellent mechanical properties.
【Fund】: 国家自然科学基金项目(No50575022)
【CateGory Index】: TG161
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 DAI Yong-juan1,MI Zhen-li2,TANG Di2,L Jian-chong2(1.School of Materials Science and Engineering,Hebei University of Science and Technology,Shijiazhuang 050018 China;2.National Engineering Research Center for Advanced Rolling Technology,University of Science and Technology Beijing,Beijing 100083,China);Effect of annealing temperature on microstructure of a Fe-Mn-TWIP steel[J];Transactions of Materials and Heat Treatment;2011-03
2 BAO Wei-ping1,ZHAO Yan-jun1,2,XU Li-wei3,XIONG Zhi-ping1,REN Xue-ping1(1.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;2.College of Materials Science and Engineering,Guangxi University,Nanning Guangxi 530004,China;3.Taiyuan Iron & Steel(Group) Co.,Ltd.,Taiyuan Shanxi 030003,China);Effect of solution treatment on microstructure and mechanical properties of TWIP steel[J];Heat Treatment of Metals;2010-04
3 SHEN Wenzhu,LI Chunfu,SONG Kaihong,HU Zhiqiang(State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu Sichuan 610500,China);Research status and prospection of twinning induced plasticity steels[J];Heat Treatment of Metals;2012-04
4 LI Hai-zhao1,2,WANG Rui-zhen2,DAI Jian-qing1,CUI Yan1,2(1.Institute of Materials and Metallurgical Engineering,Kunming University of Science and Technology,Kunming 650091,Yunnan,China;2.Institute of Structural Materials,Central Iron and Steel Research Institute,Beijing 100081,China);Research Progress of Twinning Induced Plasticity(TWIP) Steel[J];Physics Examination and Testing;2010-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Yan Ling,Liu Rendong,Yan Pingyuan,Zhou Jing(Technology Center of Angang Steel Co.,Ltd.,Anshan 114009,Liaoning,China);Study on Regularity of Microstructures Evolution of Lightweight TWIP Steels Applied in Automobile[J];Angang Technology;2010-01
2 LIU Jian - tao, CHEN Huan - ming, HU Ben-fu, LIU Guo - quan, ZHANG Yi - wen (1. School of Material Science and Engineering, University of science&Technology Beijing, Beijing 100083, China; 2. High Temperature Material Institute, Central Iron Steel Research Institute, Beijing 100081, China);High temperature deformation and dynamic recrystallization of a new type of P/M superalloy[J];Ordnance Material Science and Engineering;2004-04
3 ZHANG Zhonghua,YANG Jianqiang,ZHANG Chunxia,SHAO Weidong and OU Xinzhe (Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China);Precipitated phase of nickel-based OCTG and its effect on corrosion performance[J];Baosteel Technology;2011-06
4 YU Leiyun1 and LU Jun2 (1.Special Steel Business Unit,Baoshan Iron & Steel Co.,Ltd.,Shanghai 200940,China; 2.Research Institute,Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China);Effect of the upsetting process on the as-cast microstructure of φ508mm superalloy GH4169 ingot[J];Baosteel Technology;2012-01
5 GAO Ling,ZHANG Yong-le,MA Jin-yuan(Mechanical Equipment Manufacture Co.Ltd.ofBaotou Steel(Group) Corp.,Baotou 014010,Nei Monggol,China);Research on Improving the High Manganese Steel Lining Board(ZGMn13) Abrasion Resistant[J];Science & Technology of Baotou Steel(Group) Corporation;2008-01
6 CHEN Guoan, YANG Wangyue, GUO Shouzhen, SUN Zuqing Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China The State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China;Carbonitride precipitates during deformation of undercooled austenite in Nb-microalloyed steel[J];Journal of University of Science and Technology Beijing;2005-03
7 GUO Fajun LU Qiaotong LI Lingzhen ZONG Yanbing CANG Daqiang Metallurgical and Ecological Engineering School,University of Science and Technology Beijing,Beijing China,100083;Effect of AC field on directional solidification and interface solute coefficient of distribution[J];Journal of University of Science and Technology Beijing;2006-02
8 YAN Ling 1,2) ,TANG Di 1) , MI Zhenli 1) , GUO Jin 1) 1) National Engineering Research Center for Advanced Rolling Technology,University of Science and Technology Beijing,Beijing 100083,China 2) Technology Center, Anshan Iron and Steel Group Company,Anshan 114001,China;Properties and microstructure of TWIP steel used in automobiles[J];Journal of University of Science and Technology Beijing;2006-08
9 MI Zhenli,TANG Di,JIANG Haitao,DAI Yongjuan,WANG Haiquan,LI Shensheng National Engineering Research Center for Advanced Rolling technology,University of Science and Technology Beijing,Beijing 100083,China;Deformed microstructure characteristics of Fe-28Mn-3Si-3Al TWIP steel[J];Journal of University of Science and Technology Beijing;2007-12
10 SUN Qisong1),WANG Xinhua1),XU Xiaodong2),JIANG Dongcai2),BAI Xuejun2) 1)School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China2)Shouqin Metal Materials Co.Ltd.,Qinhuangdao 066001,China;Effect of the heating furnace time of casting slabs on the ultrasonic testing quality of medium plates[J];Journal of University of Science and Technology Beijing;2008-05
China Proceedings of conference Full-text Database 10 Hits
1 ;过共晶铝硅镁合金的研究现状及发展趋势[A];[C];2012
2 LIU Jian-tao,ZHANG Guo-Xing,ZHANG Yi-wen,TAO Yu,ZHANG Ying,CHI Yue,CHEN Kun(High Temperature Material Research Institute,Central Iron & Steel Research Institute,Beijing 100081,China);Effect of Aging Treatment on Microstructure and Tensile Property of FGH4096 PM Super Alloy[A];[C];2011
3 MA Yong-lin FAN Zhen-hai XING Shu-qing JIN Zi-li ZHAO Li-ping LI Zhong-yuan ZHANG Xiao-yan Material and Metallurgy School,UST Inner Mongolia,Baotou 014010 China;The Effects of Magnetic Annealing on Microstructure of Non-oriented Silicon Steel[A];[C];2007
4 SANG Jin-peng~1,CHAO Yong-jun~2,YUAN Chu~1,LIU Shao-guang~(1,3), YAO Ji-peng~3,LUO Lai-ma~4,XU Yu-song~1,LI Jian~4 (1.College of Material Science and Engineering,Jiangsu University of Science and Technology, Zhenjiang 212003,China;2.Wenzhou Vocational and Technical College,Wenzhou 325035,China; 3.Zhejiang Cadre New Material CO.LTD,Wenzhou 325029,China; 4.Department of Materials Science and Engineering,Zhejiang University,Hangzhou 310027,China);Microstructure and properties research of RE-containing FeMnCrNiAlBSi/Cr_3C_2 coatings[A];[C];2010
5 Fang Liang~(1,2) Yan Weilin~1 Sun Kun~1 Xu Yunhua~3 1.State Key Laboratory for Mechanical Behavior of Materials,Xian Jiaotong University,Xian,710049. 2.School of Materials Science and Engineering,China University of Mining and Technology,Xu Zhou,221116. 3.Institute of Wear Resistance Materials,Xian University of Architecture and Techonology,Xian,710055;Abrasive Wear of Sub-Surface Nanocrystalization for Hadfield Steel by Shot Peening[A];[C];2007
6 Yan Ling Mi Zhenli Tang Di Guo Jin Dai Yongjuan (Beijing University of Science and Technology National Engineering Research Center for Advanced Rolling Technology, Beijing 100083);RESEARCH ON DEFORMATION TWINS FORMATION AND ITS MECHANICAL PROPERTIES OF TWIP STEEL[A];[C];2005
7 Guo Jin Tang Di Mi Zhenli Yan Ling Dai Yongjuan (National Engineering Research Center for Advanced Rolling Technology University of Science and Technology Beijing, Beijing 100083);THE INFLUENCE FOR THE STRUCTURES AND PROPERTIES OF THE TWIP STEEL AFFECTED BY THE HEAT TREATMENT PROCESS[A];[C];2005
8 Li Fenghua, Wang Jue, Chen Shanshan, Huo Zimei, Fan Zhanguo (School of Materials and Metallurgy, Northeastern University, Shenyang 110006, China);Preparation of High Melting Temperature Silver Materials[A];[C];2006
9 ZHAO Zhong-li HAN Jing-tao LIU Jing LIU Zi-wei (Material Science and Engineering School,University of Science Technology Beijing,Beijing 100083,China);Metallurgical Analysis and Experimental Study on Inner Crack Healing by Intercritical Heat Treatment of Q235 Steel[A];[C];2007
10 YAN Ling,YAN Pingyuan,ZHOU Jing Technology Center of Angang Steel Co.,Ltd.,Anshan 114009,Liaoning,China;Researchered on Laws of the Microstructures Evolution of Light Quality TWIP Steels Used in Automobile[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Tao Changyin(AISC Technology Institute);Investigation of Controlled Rolling and Controlled Cooling Technology[J];;1997-09
2 Tang Di Xiong Ziliu Jiang Haitao(Beijin Science and Technology University);Present Study Situation of TRIP Steel and Its Development Direction[J];Angang Technology;2008-02
3 Li Shitong,Lu Yupeng,Zhu Ruifu,Chao Zhiqiang;WORK HARDENING NECHANISM ASPECTS OF HIGH MANGANESE STEEL[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1999-05
4 WANG Chao1,YUAN Shouqian1,ZHANG Xifeng2,WEI Yingjuan2,YANG Ladao2,LV Ranchao1,GU Kunwen1 (1.School of Metallurgical Engineering,Xi’an University of Architecture & Technology,Xi’an 710055,China;2.Xi’an Heavy Machinery Research Institute,Xi’an 710032,China);Influence of electrical pulse on the solidification structure and the mechanical property of 335HRB screw steel[J];Ordnance Material Science and Engineering;2009-02
5 WANG Li ZHU Xiao-dong ZHANG Pi-jun LU Jiang-xin (Baosteel Technology Center,Shanghai China,201900);Lightweighting of Automobiles and Advanced High Strength Steel[J];Bao Steel Technology;2003-05
6 Ma Fengcang1,2,Feng Weijun1,Wang Li1,Zhang Di2(1.Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China;2.Shanghai Jiaotong University,Shanghai 200030,China);The TWIP Steel Research Work at Present[J];Baosteel Technology;2008-06
7 XU Chun-chun 1 ZHANG Xin-sheng 1 HU Gang 1,2 (1. College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China; (2. Department of Chemistry, Huanggang Normal University, Hubei Huanggang 438000, China);Microstructure change of AISI304 stainless steel in the course of cold working[J];Journal of Beijing University of Chemical Technology;2002-06
8 FU Yunyi; YANG Ping; YAng Wangyue; SUNZuqing (Material Science and Engineering School, UST Beijing, Beijing 100083,China SUNZuqing State Key Laboratory for Advanced Metals and Materials, UST Beijing, Beijing 100083, China);Characterization of Strain Induced Ferrite Formed in Coarse Austenite Grained Q235 Steel[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;2000-02
9 MI Zhenli,TANG Di,JIANG Haitao,DAI Yongjuan,WANG Haiquan,LI Shensheng National Engineering Research Center for Advanced Rolling technology,University of Science and Technology Beijing,Beijing 100083,China;Deformed microstructure characteristics of Fe-28Mn-3Si-3Al TWIP steel[J];Journal of University of Science and Technology Beijing;2007-12
10 WANG Jingsong1, 2), YU Wentao3), TANG Peixin1), LIU Bo1), CAO Lijun1) , XUE Qingguo1) 1) Metallurgical and Ecological Engineering School, University of Sciences and Technology Beijing, Beijing 100083, China 2) Post-doctoral Station of USTB, Post-doctoral Work Station of Laigang Group, Shandong 271104, China 3) Qian’an ShouGang Co. Ltd., Hebei 064404, China;Experimental study on time correlation of treating time and electric pulse modifying effects on Sn-15%Pb alloy[J];Journal of University of Science and Technology Beijing;2007-S1
China Proceedings of conference Full-text Database 1 Hits
1 CHEN Ke JIN Xue-jun (School of Material Science and Engineering,Shanghai Jiaotong University,Shanghai 200240,China);Effect of C and N interstitial elements on stacking fault energy in Fe-Mn-Si based alloys[A];[C];2007
【Secondary References】
Chinese Journal Full-text Database 9 Hits
1 CAI Zhi-an,LI Chun-fu(School of Materials and Engineering,Southwest Petroleum University,Chengdu 610500,China);Finite element analysis of the expansion of the twinning induced plasticity steel solid expandable tube[J];Chinese Journal of Engineering Design;2013-03
2 LIU Jia-bin1,SHU Kang-ying1,LIU Xiang-hai1,LIU Wei1,ZENG Yue-wu2,ZHANG Sheng-cai2(1.Department of Materials Science and Engineering,Jiliang University,Hangzhou 310018,China; 2.Department of Materials Science and Engineering,Zhejiang University,Hangzhou 310027,China);Influence of recrystallization annealing on microstructure and hardness of Fe-24Mn-0.7Si-1.0Al TWIP steel[J];Transactions of Materials and Heat Treatment;2011-08
3 SHEN Wenzhu,LI Chunfu,SONG Kaihong,HU Zhiqiang(State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu Sichuan 610500,China);Research status and prospection of twinning induced plasticity steels[J];Heat Treatment of Metals;2012-04
4 CHEN Qingyong,LI Chunfu,SONG Kaihong,YANG Lihui,HU Zhiqiang,SHEN Wenzhu(State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu Sichuan 610500,China);Temperature dependence of strain hardening behavior of TWIP steel[J];Heat Treatment of Metals;2012-07
5 Yang Jie,Li Chunfu,Shen Wenzhu(State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu Sichuan 610500,China);Research status and application prospect of formation of acicular ferrite[J];Heat Treatment of Metals;2013-02
6 Yuan Jing,Li Chunfu,Xiao Qi,Shen Wenzhu,Jiang Xinlei,Sun Yan'an(School of Materials and Engineering,Southwest Petroleum University,Chendu Sichuan 610500,China);Microstructure and properties of 16MnMoVA steel after subcritical quenching[J];Heat Treatment of Metals;2013-03
7 JIN Yun-xue;SONG Yan-ping;College of Material Science and Engineering,Jiangsu University of Science and Technology;;Precipitation behavior of carbides in a high manganese austenitic steel for magnetic liner[J];Transactions of Materials and Heat Treatment;2013-12
8 Zeng Jingshan1 Liu Rendong2 Guo Jinyu2 Shi Wen1 Li lin1(1.School of Materials Science and Engineering,Shanghai University,Shanghai 200072,China; 2.Anshan Iron and Steel Group Corporation Technology Center,Anshan 114009,China);HOT DUCTILITY OF 18% Mn TWIP STEEL[J];Shanghai Metals;2012-05
9 YANG Yi,LI Chunfu,HU Zhiqiang,CHEN Qingyong(Key Laboratory of Oil and Gas Reservoir Geology and Development,Southwest Petroleum University,Chengdu 610500,China);Strain Hardening Microscopic Mechanism of TWIP Steel 30Mn25Cr10Ni2MoNbRe for Expansion Pipe[J];Hot Working Technology;2012-20
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved