Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of University of Science and Technology Beijing》 2008-07
Add to Favorite Get Latest Update

Rotor position self-sensing of a sensorless permanent synchronous motor based on fluctuating high-frequency voltage signal injection and Kalman filter

ZHOU Xiaomin,WANG Changsong,ZHONG Liping School of Mechanical and Engineering,University of Science and Technology Beijing,Beijing 100083,China  
The traditional linear control theory can not meet the system requirement of a permanent synchronous motor(PMSM) for its motion control is a coupling and nonlinear control system and measurement noise also exists in the control system.A method to estimate the rotor position of PMSM was presented based on fluctuating high-frequency voltage signal injection and Kalman rotor-position-estimator.When a fluctuating high-frequency voltage signal was injected into stator winding,the corresponding current signal containing the information of rotor position was demodulated and delivered into the Kalman rotor-position-estimator.Then the rotor position would be detected accurately.Simulation results verified the method can track the rotor position accurately,even though system noise and measurement noise exist in the control system.
【CateGory Index】: TM341
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 3 Hits
1 ZHOU Xiaomin1),ZHANG Qingdong1),WANG Changsong1),WU Ping2)1)Mechanical Engineering School,University of Science and Technology Beijing,Beijing 100083,China2)Cold Rolling Plant,Baoshan Iron & Steel Ltd.Co.,Shanghai 200940,China;Edge drop control performance and influence factor analysis of a UCMW cold mill[J];Journal of University of Science and Technology Beijing;2007-04
2 ZOU Ji-bin, XU Yong-xiang, YU Cheng-long (Department of Electrical Engineering, Harbin Institute of Technology, Harbin 150001, China);A NOVEL DETECTING METHOD OF THE ROTOR POSITION OF PMSM[J];Proceedings of the Csee;2002-12
3 QIN Feng,HE Yi-kang,LIU Yi,ZHANG Wei (College of Electrical Engineering,Zhejiang University,Hangzhou 310027,Zhejiang Province,China);COMPARATIVE INVESTIGATION OF SENSORLESS CONTROL WITH TWO HIGH-FREQUENCY SIGNAL INJECTION SCHEMES[J];Proceedings of the Csee;2005-05
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 QIN Zhi-sheng,BAI Lian-ping(School of Automation,Beijing Information Science and Technology University,Beijing 100192,China);Application of angular fine division in permanent magnet synchronous motor control system[J];Journal of Beijing Institute of Machinery;2008-04
2 ZHONG Liping,ZHOU Xiaomin,WANG Changsong,GONG Xianfeng Mechanical Engineering School,University of Science and Technology Beijing,Beijing 100083,China;Voltage inputting for the rotor position estimation of a permanent magnet motor based on high-frequency signal injection[J];Journal of University of Science and Technology Beijing;2007-12
3 CAO Xiao1,DING Rong-jun1,2,WANG Jian1 (1. School of Information Science and Engineering, Central South University, Changsha, Hunan 410075,China; 2. Zhuzhou CSR Times Electric Co., Ltd., Zhuzhou, Hunan 412001,China);High-frequency Signal Injection for Speed Identification in Speed Sensorless Control System of Asynchronous Motor[J];Converter Technology & Electric Traction;2007-01
4 QI Ji-long~a,TIAN Yan-tao~a,GONG Yi-min~b,ZHU Cheng~b(a.College of Communication Engineering,Jilin University,Changchun 130025,China;b.College of Physics,Jilin University,Changchun 130023,China);Algorithms of Sensorless PMSM Control System Based on Direct Computation and Model Reference Adaptive System[J];Journal of Jilin University(Information Science Edition);2009-01
5 Wang Zhiguo,Rong Jun,Huang Hai(Wuhan Institute of Marine Electric Propulsion,CSIC,Wuhan 430064,China);Research on Permanent Magnet Synchronous Motor Control Strategies Based on Simple Position Probe[J];Marine Electric & Electronic Engineering;2008-03
6 ZHONG Li-ping,WANG Chang-song,ZHOU Xiao-min,QI Xin(Mechanical Eng.School,University of Science and Technology Beijing,Beijing 100083,China);Influence of static negative sequence current in method of high-frequency signal injection and the strategy to cope with[J];Advanced Technology of Electrical Engineering and Energy;2008-03
7 Qi Fang Deng Zhiquan Qiu Zhijian Wang Xiaolin (Nanjing University of Aeronautics and Astronautics Nanjing 210016 China);Sensorless Technology of Permanent Magnet Synchronous Motors Based on MRAS[J];Transactions of China Electrotechnical Society;2007-04
8 ZHANG Chun-xi, SUN Li-jun, ZHU Jian-liang, LI Guo-hui, LU Zong-feng (Harbin University of Science and Technology, Harbin 150040, China);Control technology of permanent magnet motor[J];Electric Machines and Control;2005-01
9 DONG Ya-juan,JING Zhan-rong,JING Zhi-lin,XUE Feng(Northwestern Ploytechnical University,Xi′an 710072,China);Sensorless Control of Salient-pole PMSM based on High-frequency Voltage Signal Injection[J];Power Electronics;2006-05
10 Miao Xuejin Li Yongdong Xiao Xi;Speed Sensorless of PMSM with High-frequency Signal Injection[J];Electric Drive;2007-03
China Proceedings of conference Full-text Database 1 Hits
1 HUANG Lei, ZHAO Guang-zhou (College of Electrical Engineering, University, Hangzhou 310027,China.;Speed Sensorless Nonlinear Control of PMSM Drives[A];[C];2006
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 HE Anrui, ZHANG Qingdong, XU Jianyong, JIANG Zhenglian. WANG Chen 1) National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing 100083, China 2) Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China 3) Baoshan Iron & Steel Co Ltd, Shanghai 200941, China;Shape Control Performance of 1 800 mm Virtual Mills[J];Journal of University of Science and Technology Beijing;2004-01
2 SHI Xu 1, LI Shanqing 2, LIU Xianghua 1, WANG Guodong 1, XU Jianyong 2 (1.State Key Lab of Rolling and Automation, Northeastern University, Shenyang 110004; 2.Technical Center, Baoshan Iron and Steel Co., Ltd.,Shanghai 201900);FEM Analysis for Steel Strip Deformation in Cold Rolling Process[J];Iron and Steel;2004-11
3 WAN Xu-dong; WANG Yan; WAN Xi-lian; LI Zhe-sheng ( Harbin Institute of Technology , Harbin 150001, China; 2. Harbin University of Science & Technology, Harbin 150040, China);A novel position sensor of switched reluctance motor[J];JOURNAL OF HARBIN INSTITUTE OF TECHNOLOGY;1999-04
4 CHI Wenmao,GAO Wei,WU Bin,CHEN Li (Handan Iron & Steel Group CoLtd,Handan,Hebei 056015,China);NEW TECHNIQUE FOR COLD ROLLING-EDGE DROP CONTROL[J];Mining and Metallurgy;2003-02
5 Zhu Jianru 1 Lin Xiuzhen 1 Wu Ping 1 Wang Wenguang 2 (1:Cold Rolling Plant, Baoshan Iron & Steel Co., Ltd.;2:Mechanical Engineering School, UST Beijing);Development of Unified Simulation Model of Rolling for 6-Hi UCMW Wide Strip Cold Mill[J];Metallurgical Equipment;2005-04
6 QIN Feng, HE Yi-kang, LIU Yi, ZHANG Wei (College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China);Rotor position sensorless estimation for permanent magnet synchronous motors[J];Journal of Zhejiang University(Engineering Science);2004-04
7 LI Hong-ru, GU Shu-sheng (Northeastern University, Shenyang 110006,China);NEURAL-NETWORK-BASED ADAPTIVE OBSERVER OF POSITION AND SPEED OF PMSM[J];Proceedings of the Csee;2002-12
8 ZOU Ji-bin, XU Yong-xiang, YU Cheng-long (Department of Electrical Engineering, Harbin Institute of Technology, Harbin 150001, China);A NOVEL DETECTING METHOD OF THE ROTOR POSITION OF PMSM[J];Proceedings of the Csee;2002-12
9 CHEN Shuo, TSUJI Mineo, YAMADA Eiji (1. Dept. of Mech. Eng., Fuzhou University, Fuzhou 350002, China; 2. Dept. of Elec. & Elec. Eng., Nagasaki University, Nagasaki 852-8521, Japan);ON-LINE IDENTIFICATION OF STATOR RESISTANCE FOR SENSORLESS VECTOR CONTROL SYSTEM OF INDUCTION MOTORS[J];Proceedings of the Csee;2003-02
10 LIN Ping, HU Chang-sheng, LI Ming-feng, ZHANG Zhong-chao (College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China);THE IMPLEMENT OF SPEED ESTIMATION CORE BASED ON MRAS ALGORITHM[J];Proceedings of the Csee;2004-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved