Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《北京科技大学学报(英文版)》 2008-03
Add to Favorite Get Latest Update

Static and dynamic finite element analysis of 304 stainless steel rod and wire hot continuous rolling process

Siyu Yuan~(1,2)) Liwen Zhang~(1,2)) Shulun Liao~(1,2)) Mao Li~(1,2)) Min Qi~(1)) Yu Zhen~(3)) Shuqi Guo~(3)) 1)School of Materials Science and Engineering,Dalian University of Technology,Dalian 116023,China 2)State Key Laboratory of Materials Modification by Laser,Ion and Electron Beams,Delian University of Technology,Dalian 116023,China 3)Dongbei Special Steel Group Corporation,Dalian 116031,China  
Three-dimensional finite element models were developed to analyze 304 stainless steel rod and wire hot continuous rolling process with the help of MSC.Marc software.The entire 30-pass deformation process and the actual parameters of production line were taken into account.Static and dynamic procedures were used to study the continuous rolling process with the aid of the thermo-mechanical coupled FEM of elastic-plasticity.The properties of billets,such as deformation,temperature field and rolling force,were mainly discussed.The simulation results of temperature agree well with the measured values.Comparisons of the analy- sis results obtained using static implicit method and dynamic implicit method were presented.It is shown that static implicit proce- dure is more accurate than dynamic implicit procedure and is able to simulate the rolling process with a lower speed,such as a rough- ing mill.Whereas,dynamic analysis shows a higher efficiency than static analysis and is fit for simulating the rolling process with a higher speed,such as a finishing mill.
【CateGory Index】: TG142.71
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 QI Haiqun1,2SHAN Xiaobiao1,and XIE Tao1 1 School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,China 2 Department of Material and Chemical Engineering,Heilongjiang Institute of Technology,Harbin 150050,China;Design and Experiment of the High Speed Wire Drawing with Ultrasound[J];中国机械工程学报(英文版);2009-04
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Jiefeng Cheng, Zhengdong Liu, Han Dong, and Yong GanCentral Iron and Steel Research Institute, Beijing 100081, China;Analysis of the factors affecting thermal evolution of hot rolled steel during coil cooling[J];北京科技大学学报(英文版);2006-02
2 Li Jianchao, Wu Di and Zhao Xianming (State Key Laboratory of Rolling and Automation, Northeast University, Shenyang 110004);Simulation of Square Billet Rolling in Box Pass by Explicit Dynamics Finite Element Method[J];Special Steel;2002-02
【Co-citations】
Chinese Journal Full-text Database 6 Hits
1 ZHANG Li-wen~1,LI Mao~1,LIAO Shu-lun~1,ZHEN Yu~2,GUO Shu-qi~2(1.School of Materials Science and Engineering,Dalian University of Technology,Dalian 116023,Liaoning,China;2.Northeast Special Steel Group,Dalian 116031,Liaoning,China);FE Simulation of Rough Rolling of GCr15 Steel Rod and Wire by Implicit Static Method and Implicit Dynamic Method[J];Iron & Steel;2006-10
2 WANG Yan-min,WU Di,ZHAO Xian-ming,ZHOU Jian-hua(The State Key Lab.of Rolling & Automation,Northeastern University,Shenyang 110004,Cnina);Universal rolling technique for high precision 60kg/m heavy rail and simulation of finite element method[J];Research on Iron and Steel;2006-04
3 WANG Yan-min1,WU Di2,ZHAO Xian-ming2,ZHOU Jian-hua2(1.Department of Mechanical Engineering,Luoyang College of Technology,Luoyang 471003,Henan,China;2.State KeyLaboratory of Rolling Technology and Automation,Northeastern University,Shenyang 110004,Liaoning,China);Semi-Universal and Universal Finish Pass of Rolling High Precision 60 kg/m Heavy Rail[J];Journal of Iron and Steel Research;2007-07
4 DONG An-ping GUAN Xiao-jun TIAN Yong ZHAO Xian-ming ZOU Fei-fei JIAO Xian-you LIU Yun-teng ( College of Material Science and Engineering, Shandong University, Jinan 250061 China) ( Medium section rolling plant, Jinan Iron & Steel Group Company, Jinan 250101 China) ( The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004 China);The fem simulation for the effect of spread on Q345B square billets rolled by adjusting waist obliquity in box pass[J];Journal of Plasticity Engineering;2005-02
5 ZHOU Jian-hua WU Di ZHAO Xian-ming WANG Yan-min (The State Key Lab. of Rolling & Automation, Northeastern University,Shenyang 110004 China);Simulation of finite element method and analysis on rolling 60kg/m heavy rail with two kinds of universal finish pass[J];Journal of Plasticity Engineering;2007-06
6 Zhang Sixun1,Wang Huiyu2,Zhu Guoming3,Kang Yonglin3(1.Technical R & D Center,Laiwu Iron and Steel Group Ltd.,Laiwu 271104,China;2.Bar Plant,Laiwu Iron and Steel Corporation,Laiwu 271106,China;3.University of Science and Technology Beijing,Beijing 100083,China);Finite element simulation analysis of rolling process of oval-box-preslit groove[J];Journal of Wuhan University of Science and Technology(Natural Science Edition);2008-02
China Proceedings of conference Full-text Database 1 Hits
1 ;棒材切分工艺轧制过程仿真分析[A];[C];2008
【Co-references】
Chinese Journal Full-text Database 4 Hits
1 Yu-An Jing1,2), Lin Hu1), Lihui Wang3), and Jingtao Han2) 1) School of Materials Science and Engineering, University of Science and Technology Liaoning, Anshan 114044, China 2) Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China 3) AnGang New Steel Company Limited, Anshan 114003, China;Study on rolling process optimization of high carbon steel wire[J];北京科技大学学报(英文版);2007-05
2 Shulun Liao1,2), Liwen Zhang1,2), Siyu Yuan1,2), Yu Zhen3), and Shuqi Guo3) 1) School of Materials Science and Engineering, Dalian University of Technology, Dalian 116023, China 2) State Key Laboratory of Materials Modification by Laser, Ion, and Electron Beams, Dalian University of Technology, Dalian 116023, China 3) Dongbei Special Steel Group, Dalian 116031, China;Modeling and finite element analysis of rod and wire steel rolling process[J];北京科技大学学报(英文版);2008-04
3 CAI Gaipin~(1,2) WENG Haishan~1 JIANG Zhihong~2 LUO Xiaoyan~2 (1. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083; 2. School of Mechanical and Electronic Engineering Jiangxi University of Science and Technology, Ganzhou 341000);NON-LOCAL FRICTION SURFACE EFFECT AND APPROXIMATE SOLUTION OF DRAWING DEFORMATION WITH VIBRATION[J];Chinese Journal of Mechanical Engineering;2006-08
4 Xie Tao Qi HaiqunZhang Jun Harbin Institute of Technology, Harbin, 150001;Experimental Research on Wire Drawing with Ultrasonic Vibration[J];China Mechanical Engineering;2006-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved