Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《矿物冶金与材料学报(英文版)》 2009-05
Add to Favorite Get Latest Update

Decoration of activated carbon nanotubes by assembling nano-silver

Chen-sha Li1,2),Bin-song Wang3),Ying-jie Qiao1),Wei-zhe Lu2),and Ji Liang2) 1) Department of Materials Science,Harbin Engineering University,Harbin 150001,China 2) Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China 3) School of Chemistry and Materials Science,Heilongjiang University,Harbin 150080,China  
A facile solution processed strategy of synthesizing nano silver assembled on carbon nanotubes(CNTs) at room temperature was put forward.Activated carbon nanotubes were used as precursors for preparing silver-decorated nanotubes.The nature of the decorated nanotubes was studied using transmission electron microscopy(TEM),scanning electron microscopy(SEM),and energy-dispersive X-ray spectroscopy(EDX).The inert surfaces of carbon nanotubes were activated by introducing catalytic nuclei via an oxidation-sensitization-activation approach.Activated carbon nanotubes catalyzed the metal deposition specifically onto their surfaces upon immersion in electroless plating baths.The method produced nanotubes decorated with silver.The extent of silver decoration was found to be dependent on fabrication conditions.Dense nano silver assembled on nanotube surfaces could be obtained by keeping a low reaction rate in the solution phase.The results here show that this method is an efficient and simple means of achieving carbon nanotubes being assembled by nano metal.
【Fund】: supported by the Major State Basic Research Development Program of China (No.10332020)
【CateGory Index】: TB383.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 5 Hits
1 Shu-Huei Hsieh1) and Jao-Jia Horng2) 1) Department of Materials Science and Engineering, Formosa University, Yunlin, China Taipei 2) Department of Safety, Health and Environmental Engineering, Yunlin University of Science and Technology, Yunlin, China Taipei;Adsorption behavior of heavy metal ions by carbon nanotubes grown on microsized Al_2O_3 particles[J];北京科技大学学报(英文版);2007-01
2 Jinzhang Gao, Fei Guan, Yongjun Ma, and Jingwan Kang Institute of Chemistry, Northwest Normal University, Lanzhou 730070, China.;Preparation and characterization of Ni/Co bimetallic nano-clusters[J];北京科技大学学报(英文版);2003-04
3 Quanshui Chen, Houxiu Gao, Shuangyi Liu, Guijie Zhang, and Yuqin Yang School of Material Science and Engineering, Tianjin University, Tianjin 300072, China Department of Material Science and Engineering, East China Technology Institute, Fuzhou 344000, China;One-dimensional nano-structure of Cu-Zn-Al alloy[J];北京科技大学学报(英文版);2004-05
4 Chensha Li, Baoyou Zhang, Xingjuan Chen, Xiaoqing Hu, and Ji Liang Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China Center for Analysis and Measurement, Harbin Institute of Technology, Harbin 150001, China Chemistry Engineering Department, Harbin engineering university, Harbin 150001, China; The State key Lab of New Ceramics and Fine Processing of Tsinghua University, Beijing, 100084, China;Enhancing the crystalline degree of carbon nanotubes by acid treatment, air oxidization and heat treatment[J];北京科技大学学报(英文版);2005-01
5 Xiaofeng Wang, Dianbo Ruan, Zheng You, Yiqiang Lu, and Qiqian Sha Department of Precision Instruments and Mechanics, Tsinghua University, Beijing 100084, China Department of chemistry, University of science and technology Beijing, Beijing 100084, China;Performance of a 60 F carbon nanotubes-based supercapacitor for hybrid power sources[J];北京科技大学学报(英文版);2005-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved