Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Fiber Reinforced Plastics/Composite》 2004-02
Add to Favorite Get Latest Update

RESIN FILM INFUSION PROCESS AND NUMERICAL SIMULATION METHOD

YAN Shi lin,YANG Mei,TAN Hua (Dept.of Eng.structure and Mechanics,Wuhan University of Tech.,Wuhan 430070,China)  
A new composite manufacturing method of resin film infusion process is introduced.The paper presents the research progress status,technical principle,material option and main advantages of RFI process.The numerical simulation method is also described especially.It discusses how to estabished mathematical model which can reflect physical chemistry phenomena of RFI process such as resin flow,cure and heat transfer.Because of the vast array of material properties and processing parameters,trial and error procedures only for selecting the processing cycle are time and cost consuming.Mathematical simulation models are a superior alternative for improvement of efficiency and determination of optimal processing cycles.
【Fund】: 国家自然科学基金项目 (1 9972 0 4 9)
【CateGory Index】: TB33
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 5 Hits
1 PEI Zhao-qing,WANG Ru-min (Northwestern Polytechnical University,Xi'an 710072,China);Study on the resin film for bismaleimide by allyl compound modified[J];China Adhesives;2007-12
2 CAO Wei,CHEN Li-xin,DONG Jian-na,WANG Ya-zhou (Key Laboratory of Applied Physics and Chemistry of Ministry of Education,Department of Applied Chemistry,School of Science,Northwestern Polytechnical University,Xi'an 710072,China);Actuality and development of resin film infusion (RFI) process[J];China Adhesives;2008-03
3 Liu Yunfang,Nie Yufeng,Li Duning,Liang Bin(School of Science,Northwestern Polytechnical University,Xi'an 710129);Numerical Simulation of Modified Bismaleimide Resin in the Resin Film Infusion Process[J];Mechanical Science and Technology for Aerospace Engineering;2010-12
4 Chen Shuhua Liu Jun Zeng Jingcheng(Astronautics and Materials Engineering Institute,National University of Defence and Technology,Changsha 410073);Design and Manufacture of FRP Mould in RFI Experiment[J];Aerospace Materials & Technology;2006-01
5 Dai Xiaoqing Xiao Jiayu Zeng Jingcheng Jiang Dazhi Yin Changping (College of Aerospace and Materials Engineering,National University of Defense Technology,Changsha 410073);Flow Actions of Reactive Liquid Resin Within Fiber Preform[J];Aerospace Materials & Technology;2008-06
China Proceedings of conference Full-text Database 1 Hits
1 Tang Bangming,Liang Ziqing,An Xuefeng,Li Yanliang,Zhang Ming,Yi Xiaosu (Beijing Institute of Aeronautical Materials,National Key Laboratory of Advanced Composites,Beijing 100095);Study on Capillary Infiltration Properties of Carbon Fabric for Liquid Composite Molding[A];[C];2006
【Citations】
Chinese Journal Full-text Database 1 Hits
1 WANG Dong, LIANG Guo zheng (Dept. of Chemical Engineering, Northwestern Polytechnical University, Xi′an 710072,China);INVESTIGATION OF HIGH PERFORMANCE RESIN FILM FOR RESIN FILM INFUSION PROCESS[J];Acta Materiae Compositae Sinica;2001-01
China Proceedings of conference Full-text Database 1 Hits
1 Shen Zhen Chen Puhui (Aircraft Structure Research Institute, Xi'an 710065, P.R.China);REVIEW AND PROSPECT OF AERONAUTICAL COMPOSITE TECHNOLOGY DEVELOPMENT[A];[C];2000
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Liu Jianjun, Wang Yanxiang, Chen Hou, Zhu Bo, Wang Chengguo ( Carbon Fiber Center of Shandong University,Jinan 250061);DEVELOPMENT OF CONTINUOUS SUCKER ROD OF CARBON FIBER EPOXY RESIN COMPOSITE[J];Engineering Plastics Application;2002-05
2 Cai Jian (Institute 59 of China's Ordnance Industry, Chongqing 400039, China);MOLDING TECHNOLOGIES OF GLASS FIBRE REINFORCED PLASTICS[J];Engineering Plastics Application;2003-02
3 Cai Haopeng Wang Jun Duan Huajun (Wuhan University of Technology);A REVIEW TO FABRICATION AND FORMING OF THERMOPLASTIC COMPOSITES[J];Fiber Reinforced Plastics/composite;2003-02
4 CHEN Hong-yan, WANG Ji-hui (Wuhan University of Technology, Wuhan of Hubei Prov. 430070, China);CARBON NANOFIBER AND APPLICATION IN POLYMER[J];Fiber Reinforced Plastics/Composite;2005-03
5 HE Jin-rui, NING Rong-chang(Dept. of Applied Chemistry,Northwestern Polytechnical University, Xian 710072,China)Abstct: The rheological characterization and multimelting behavior of PA-6 composites were studied by capillary rheometer and differential scanning calorimetry(DSC). In addition, the relation between the moulding condition and composite properties was studied. And the best moulding condition for PA-6 composites is proved that the mouding temperature is 238℃ and moulding pressure 1MPa with 1hour to keep them.;STUDY OF COMPOSITE MOULDING TECHNOLOGY FOR HIGH CONTENT CONTINUOUS GLASSFIBER REINFORCED NYLON 6[J];Fiber Reinforced Plastics/Composite;2005-05
6 SONG Xiu-gong~1,SUN Wei~2,WANG Ji-hui~1(1.Wuhan University of Technology,Wuhan 430070,China;2.Beijing FRP Auto Part Co.,Beijing 102101,China);INFLUENCE OF SMC MODING PARAMETERS ON PINS IN SURFACE OF LARGE COMPLICATED AUTO PARTS[J];Fiber Reinforced Plastics/Composites;2006-03
7 JU Jian-guo,LI Wen-xiao,XUE Yuan-de(Institute of Composite Material & Structure,School of Aerospace Engineering & Applied Mechanics,Tongji University,Shanghai 200092,China);PROCESS AND PERFORMANCE OF SANDWICH STRUCTURE WITH CELLULAR SOLIDS CORE AND FRP SKINS[J];Fiber Reinforced Plastics/Composites;2006-05
8 ZHANG Na,YAO Shu-yan,MA Ju,ZHANG Heng(College of Material Engineering,Zhengzhou University,Zhengzhou 450052,China);STUDY ON THE SHRINKAGE DEFORMATION OF THIN COMPOSITE LAMINATES DURING CURING PROCESS[J];Fiber Reinforced Plastics/Composites;2009-04
9 LONG Wei GU Aijuan (Institute of Polymer Composites,Zhejiang University ,Hangzhou 310027);Mechanical Properties of Carbon Nanotubes and Polymer/Carbon Nanotube Nanocomposites[J];Materials Review;2002-12
10 ZHANG Jun, SONG Benchao,ZHANG Heng, CAI Hong(School of Materials Engineering, Zhengzhou University,Zhengzhou 450025);Study on the Mechanism of Void Formation in Roto-moulding of Long-fiber Reinforced Resin[J];Materials Review;2006-08
China Proceedings of conference Full-text Database 2 Hits
1 Zheng Xitao Guo Wenxue Sheng Cuozhu Xiao Juan Li Ye (Aircraft Strength Research Institute, P.O. Box No.86, Xian, 710065);AN EXPERIMENTAL INVESTIGATION ON THE MECHANICAL BEHAVIOR OF 3-D BRAIDED COMPOSITES[A];[C];2002
2 HOU Wei-guo,ZHANG Wei-fang,WANG Xiao-liang (Dept of System Engineering of Engineering Technology,Beijing University of Aeronautics and Astronautics,Beijing 100191,China) WANG Yue,ZHANG Feng-ling (Shenyang Aerocraft Corporation,Shenyang 110034,China);Thermal Deplying Technique for Defects in Resin-based Composites[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Deng Yanping Duan Yuexin Gao Jiawu Zhang Mingxi(Beijing Univercity of Aeronautics and Astranautics) (No. 637 Research Institute of AVIC .Jinan);STUDY ON THE CURE KINETICS OF MODIFIED BISMALEIMIDE RESINS 4501A,4501B[J];Engineering Plastics Application;1994-06
2 LU Xiao-chun XIN Chun-ling YANG Xiao-ping YU Ding-sheng (The Key Laboratory of Beijing City on Preparation and Processing of Novel Polymer, Beijing University of Chemical Technology, Beijng 100029, China);Effect of carbon fibers surface characteristics on the cure kinetics of benzoxazine[J];Journal of Beijing University of Chemical Technology;2005-04
3 Zhang Gangyi Shen Yukao (China Scientific & Technological lndustrial Group Corporation of Inorganic Materials);INTRODUCTION OF RESIN FLOW CONTROL IN RTM TECHNOLOGY[J];FIBER REINFORCED PLASTICS/COMPOSITE;1999-05
4 Duan Huajun Ma Huiru Wang Jun;RESEARCH STATUS OF RTM PROCESS AT HOME AND ABROAD[J];FIBER REINFORCED PLASTICS/COMPOSITE;2000-05
5 Wang Xiaojie Xie Qunwei Zhang Wei You Lihong (The 43rd Institute of the Fourth Academy of CASC);STUDY OF CURING REACTION OF EPOXY FORMULA[J];Fiber Reinforced Plastics/composite;2001-02
6 DAI Xiao-qing~1,TAN Yan~2,LIU Jun~1(1.College of Aerospace and Material Engineering,National University of Defense Technology,Changsha 410073,China;2.Widege Co.Ltd.of Zhuzhou Electric Locomotive Works,Zhuzhou 412001,China);INVESTIGATION OF EPOXY RESIN MATRIX FOR RESIN FILM INFUSION PROCESS[J];Fiber Reinforced Plastics/Composites;2006-01
7 ZHANG Ming-long,XIAO Jia-yu,ZENG Jing-cheng,LIU Jun(College of Aerospace and Material Engineering,National Univ.of Defense Technology,Changsha 410073,China);STUDY ON COMPOSITE PLATES FABRICATED BY RFI PROCESS[J];Fiber Reinforced Plastics/Composites;2006-02
8 SHI Feng,DUAN Yue-xin,LIANG Zhi-yong,ZHANG Zuo-guang(School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);RHEOLOGICAL BEHAVIORS OF EPOXY RESIN SYSTEM IN HOT MOLDING PROCESS[J];Fiber Reinforced Plastics/Composites;2006-04
9 ZHANG Yan-fei~1,LIU Ya-qing~1,DU Rui-kui~1,CHEN Chun~2(1.School of Materials Science and Engineering,North University of China,Taiyuan of Shanxi Prov.030051,China;2.Beijing FRP Research & Design Institute,Beijing 102101,China);RESEARCH PROGRESS IN TACKIFIED FIBER PREFORM TECHNOLOGY FOR LCM[J];Fiber Reinforced Plastics/Composites;2006-06
10 Chen Jirog Wang Jinggang Jiao Yangsheng (East China Chemical Uuiversity Science and Technology);STUDY OF CURE TECHNOLOGY OF MODIFIED BISMALEIMIDE RESIN[J];FIBER REINFORCED PLASTICS/COMPOSITE;1998-03
【Secondary References】
Chinese Journal Full-text Database 9 Hits
1 Xie Xiaoqin, Gu Aijuan,Yuan Li, Liang Guozheng(School of Material Engineering, Soochow University, Suzhou 215021, China);STUDY ON FOAMING PROCESS OF MODIFIED BISMALEIMIDE FOAM[J];Engineering Plastics Application;2008-10
2 LIANG Bin1,2(1 Department of Applied Chemistry,School of Science,Northwestern Polytechnical University,Xi'an 710072;2 Beijing Institute of Aeronautical Materials,Beijing 100095);Low Cost Manufacturing Technology of Resin Matrix Composites for Aeronautical Application[J];Materials Review;2009-07
3 ZHANG Guoli,ZHANG Peng,LI Jialu,CHEN Li(Key Laboratory for Advanced Textile Composites of Ministry of Education, Tianjin Polytechnic University,Tianjin 300160,China);Preparation and chemorheology of epoxy resin film used in RFI process[J];Acta Materiae Compositae Sinica;2008-03
4 DAI Xiao-qing,ZENG Jing-cheng,LIU Jun,XIAO Jia-yu(College of Aerospace and Material Engineering,National Univ.of Defense Technology,Changsha 410073,China);Study on the Curing Reaction of Epoxy Resin for RFI Process[J];Journal of National University of Defense Technology;2007-03
5 CAO Wei,CHEN Li-xin,DONG Jian-na,WANG Ya-zhou (Key Laboratory of Applied Physics and Chemistry of Ministry of Education,Department of Applied Chemistry,School of Science,Northwestern Polytechnical University,Xi'an 710072,China);Actuality and development of resin film infusion (RFI) process[J];China Adhesives;2008-03
6 CHENG Lei,WANG Ru-min,WANG Xiao-jian,DANG Jing (Department of Applied Chemistry,College of Science,Northwestern Polytechnical University,Xi’an 710129,China);Research progress of bismaleimide resin modified by allyl compounds[J];China Adhesives;2009-04
7 ZHAO Jing,LI Ling (Institute of Material Science and Technology of North University of China,Taiyuan 030051,China);Research progress of bismaleimide resin modified by toughening[J];China Adhesives;2009-12
8 LI Duning,NIE Yufeng,YAN Hongxia (School of Science,Northwestern Polytechnical University,Xi'an 710129);Research Progress in Numerical Simulation of Resin Film Infusion Process[J];Materials Review;2010-03
9 Dai Xiaoqing Zeng Jingcheng Liu Jun(College of Aerospace and Material Engineering,National University of Defense Technology,Changsha 410073);Curing Kinetics of Epoxy Resin for RFI Process[J];Aerospace Materials & Technology;2007-04
China Proceedings of conference Full-text Database 1 Hits
1 LIAO Ling(School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China);THE CURRENT SITUATION AND DEVELOPMENT TREND OF COMPOSITE MATERIAL MOULD-HEATING SYSTEM[A];[C];2008
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved