Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Surface Engineering》 2006-02
Add to Favorite Get Latest Update

Principal and Technology of Metal Ion Implantation at Elevated Temperatures

LEI Ming-kai, LI Peng, CHANG Hai-wei, CHEN Tao (School of Materials Science and Engineering, Dalian University of Technology, Dalian Liaoning 116024 China)  
A mass transfer model is built up for metal ion implantation at elevated temperatures based on the transport of ions in solid and the radiation enhanced diffusion theory, and the effective formation heat model is built to predict the intermetallics formation during the ion implantation by introducing. The surface modification of AZ31 magnesium alloy by Al ion implanting at elevated temperature is carried out in a MEVVA 80-10 ion implantation system. The concentration-depth profiles of implanted Al and the microstructure of implanted samples are analyzed by Rutherford backscattering spectrometry and x-ray diffraction, respectively. The calculated concentration-depth profiles and the predicted formation of Mg17Al12 intermetalics are consistent with the measurement results. The AZ31 magnesium alloy samples implanted with an implantation dose of 6×1016 ions·cm-2 have the highest corrosion potential of -1 180 mV (SCE)and pitting corrosion breakdown potential of -480 mV (SCE). Their passive current density is reduced correspondently by about one order that of the original sample. The worn grooves observed on the Al ion implanted samples at elevated temperature is narrow with a reduced wear rate of about 20 % that of the original sample. The Al ion implantation into AZ31 magnesium alloys at elevated temperature improves significantly performance of anti-corrosion and wear-resistance.
【Fund】: 教育部高校优秀青年教师教学科研奖励计划项目
【CateGory Index】: TG174.44
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 5 Hits
1 WANG Ying,ZHANG Jin,MA Yan-long,WU Chao-yun (College of Materials Science and Engineering,Chongqing Institute of Technology, Chongqing 400050,China);New Development of Surface Treatment for Magnesium Alloys[J];Surface Technology;2006-06
2 YANG Xiao-wei,WANG Gui-xiang,DONG Guo-jun,GONG Fan(Harbin Engineering University,College of Materials Science and Chemical Engineering,Key Laboratory of Superlight Materials and Surface Technology,Harbin 150001,China);Advance in the Research of Surface Treatment for Magnesium-Lithium Alloy[J];Electroplating & Pollution Control;2009-04
3 HOU Bin(Nanjing Research Institute of Electronics Technology,Nanjing 210013,China);Research Development of Anti-corrosion Surface Treatment for Magnesium Alloys[J];Electro-Mechanical Engineering;2008-04
4 ZHOU Hai,YANG Ying-ge,CHENG Fei,WAN Han-cheng,CAI Shuo (Dept.of Mech.and Eng.,Beijing Institute of Petro-chemical Technology,Beijing 102617,China);Study on Ti Ion Implantation on Surface of Pure Magnesium[J];Hot Working Technology;2007-20
5 LIU Chao-feng WANG Li-zhen GU Shu-hua (Zhengzhou University of Light Industry Henan Provincial Key Laboratory of Surface & Interface Science, Zhengzhou 450002 China);New surface modification technology of wrought magnesium alloy[J];Journal of Plasticity Engineering;2007-06
【Citations】
Chinese Journal Full-text Database 2 Hits
1 CHANG Haiwei;CHEN Tao;LEI Mingkai Department of Materials Engineering, Dalian University of Technology, Dalian 116024;MASS TRANSFER MODELLING OF Cr ION IMPLANTATION INTO Al TARGET AT ELEVATED TEMPERATURE[J];Acta Metallrugica Sinica;2004-06
2 CHEN Tao, CHANG Haiwei, LEI Mingkai Department of Materials Engineering, Dalian University of Technology, Dalian 116024;SURFACE ALLOYING OF Al ION IMPLANTATION INTO Fe TARGET AT ELEVATED TEMPERATURE[J];Acta Metallrugica Sinica;2005-04
【Co-citations】
Chinese Journal Full-text Database 1 Hits
1 CHEN Tao, CHANG Haiwei, LEI Mingkai Department of Materials Engineering, Dalian University of Technology, Dalian 116024;SURFACE ALLOYING OF Al ION IMPLANTATION INTO Fe TARGET AT ELEVATED TEMPERATURE[J];Acta Metallrugica Sinica;2005-04
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Liu Meihua~1, Wang Jing~2, Wang Dongai~1 (1. School of Mechanical Engineering, Tianjin Commence University, Tianjin 300134, China; 2.Military Traffic Institute, Tianjin 300161, China);ANALYSIS OF TEST METHODS FOR INDENTATION HARDNESS[J];Engineering Plastics Application;2005-07
2 ZHANG Jing 1, PAN Fu-sheng 1, GUO Zheng-xiao 2, DING Pei-dao 1, WANG Ling-yun 1 (1.College of Materials Science & Engineering, Chongqing University, Chongqing 400044, China; 2.Department of Materials, Queen Mary, University of London, Mile End Road, London E1 4NS, UK);Phase research of magnesium alloys containing zirconium[J];Ordnance Material Science and Engineering;2002-06
3 ZHANG Ping-ze, LI Zhong-hou, HE Zhi-yong, XU Zhong, ZHANG Gao-hui, (Surface Engineering Institute, Taiyuan University of Technology, Taiyuan 030024, China);Surface chromizing of Ti-6Al-4V by double glow plasma surface alloying technology[J];Ordnance Material Science and Engineering;2005-01
4 SUN Hua, FENG Li-ming (Dep. of Materials, Shandong Institute of Architecture and Engineering, Jinan 250014, China);Study of lactic acid electroless system Ni-P alloy complex stabilizers[J];Ordnance Material Science and Engineering;2005-01
5 QIAN Yun peng, HE Qing fu, YAN Guo chen, GAO Yi gang (College of Mechanical Engineering, Northern Jiaotong University, Beijing 100044,China);Vacancy-Solute Atom Complexes Diffusion and Non-Equilibrium Segregation in Alloy Steels[J];Journal of Northern Jiaotong University;2001-01
6 Huai Kaiwen,Yu Shichang,Hu Jincheng(Stainless Steel Div.,Baosteel Research Institute,Shanghai 201900,China);Nitrogen Alloying of Austenitic Stainless Steel 316L[J];Baosteel Technology;2007-04
7 He Zhiyong;Gao Yuan;Zhao Jinxiang;Gu Fengying;Xu Zhong(Taiyuan University of Technolagy);SURFACE ALLOYING OF CAST IRON BY THE XU-TEC PROCESS[J];Acta Armamentarii;1995-03
8 Kong Zhigang Liu Hongbo Zhang Hu (School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Effects of Zr addition on structure and properties of Mg-Zr alloy[J];Journal of Beijing University of Aeronautics and Astronautics;2004-10
9 Li Yihong Zhu Liqun Liu Huicong Chen Yichi(School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Behavior of silica sol during the anodizing process of magnesium alloy[J];Journal of Beijing University of Aeronautics and Astronautics;2008-02
10 LIN Cui, LI Xiaogang Corrosion and Protection Center, Key Laboratory for Corrosion, University of Science and Technology Beijing, Beijing 100083, China State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China;Atmospheric Corrosion Initial Stages of Magnesium Alloy in the Presence of NaCl and SO_2[J];Journal of University of Science and Technology Beijing;2004-05
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 DING Pei-pei,YE Cong-wang,LING Guo-ping(Institute of Metallic Materials,Zhejiang University,Hangzhou 310027,China);Investigation on Surface Defects Produced in Pretreatment of Die-casting AM60B Magnesium Alloy[J];Surface Technology;2008-01
2 XU Zhou1,WANG Hai-qing1,DING Yi1,MA Li-qun1,WU Xian-zhi2(1.Nangjing University of Techenology,Nanjing 210009,China;2.Suzhou Pegatron Corp.,Suzhou 215011,China);Study on Anodizing Process for AZ31 Magnesium Alloy[J];Surface Technology;2008-03
3 YANG Zu-bin1,ZENG Li-hong2(1.School of Mechanical Engineering,Chongqing Technology and Business University,Chongqing 400067,China;2.Jiangbei Campus Management Committee,Chongqing Technology and Business University,Chongqing 400020,China);Corrosion Prevention Techniques of Metal Package Coating Materials[J];Surface Technology;2009-04
4 CUI Hong-zhi1,ZHANG Hai-bo1,SUN Jin-quan1,2,CAO Li-li1,XIAO Cheng-zhu1 (1 College of Material Science and Technology,Shandong University of Science and Technology,Qingdao 266510,Shandong,China;2 College of Mechanical and Electronic Engineering,China University of Petroleum,Qingdao 266555,Shandong,China);Study on the Surface Melting Treatment and the Corrosion Resistance of Magnesium Alloy AZ91 by Plasma Surface Treatment[J];Journal of Materials Engineering;2009-S1
5 ZHOU Lin,YANG Suyuan(School of Material Science and Engineering,Beijing Institute of Technology,Beijing 100081,China);Research development of surface anticorrosion treatment on magnesium alloy[J];Ordnance Material Science and Engineering;2009-05
6 FANG Xin-xin CAO Yue-bin LIANG Wei LI Qing WAN Hong CAO Xian-long (Chongqing University of Science and Technology,Chongqing 401331);Conventional Treatment Technology and Silanization Technology for the Surface of Magnesium Alloy[J];Journal of Chongqing University of Science and Technology(Natural Sciences Edition);2010-02
7 CHENG Yongqi~1,ZHANG Peng~1,LIU Wei~1,CHEN Zhenhua~2 (1 Faculty of Material and Energy,Guangdong University of Technology,Guangzhou 510006;2 School of Material Science and Engineering,Hunan University,Changsha 410082);Research Progress in Continuous Shear Deformation Process[J];Materials Review;2008-S3
8 YU Min,LI Jinglong,LI Wenya (Shaanxi Key Laboratory of Friction Welding Technologies,Northwestern Polytechnical University,Xi'an 710072);Potential Applications of Cold Spray Technology in Surface Treatment and Forming of Magnesium Alloys[J];Materials Review;2008-S3
9 LI Hai-yan1,LI Zhi-sheng2,ZHANG Shi-zhen1,SUN Chun-long1,WANG Hong1(1.Marine Chemical Research Institute,Qingdao 266071,China;2.Navy 92323 Unit,Qingdao 266003,China);Corrosion and Protection Research of Magnesium Alloys[J];Corrosion & Protection;2010-11
10 LI Liang-liang1,YAO Zhong-ping1,2,LIU Xin-rong1,ZHANG Xiao-lei1,JIANG Zhao-hua1(1.College of Chemical Engineering and Technology,Harbin Institute of Technology,Harbin Heilongjiang 150001,China;2.Postdoctoral Station of Chemical Engineering and Technology,Harbin Institute of Technology,Harbin Heilongjiang 150001,China);Preparation and corrosion resistance of micro-arc oxidation ceramic coating on magnesium alloy[J];Heat Treatment of Metals;2009-08
【Secondary Citations】
Chinese Journal Full-text Database 3 Hits
1 LEI Mingkai; ZHU Xuemei; YUAN Lijiang; ZHANG Zhonglin(Department of Materials Engineering, Dalian University of Technology, Dalian 116024)(Department of Materials Science and Engineering, Dalian Railway Institute, Dalian 116028);MASS TRANSFER MECHANISM FOR PLASMA-BASED LOW-ENERGY ION IMPLANTION OF STEEL[J];ACTA METALLRUGICA SINICA;1999-07
2 CHANG Haiwei;CHEN Tao;LEI Mingkai Department of Materials Engineering, Dalian University of Technology, Dalian 116024;MASS TRANSFER MODELLING OF Cr ION IMPLANTATION INTO Al TARGET AT ELEVATED TEMPERATURE[J];Acta Metallrugica Sinica;2004-06
3 YU Kun, LI Wenxian, WANG Richu, MA Zhengqing (School of Materials Science and Engineering, Central South University, Changsha 410083, China);Research, development and application of wrought magnesium alloys[J];The Chinese Journal of Nonferrous Metals;2003-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved