Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Surface Engineering》 2009-03
Add to Favorite Get Latest Update

Microstructure and Wear Resistance of in-situ Synthesis ZrC Particulate Reinforced Metal Matrix Composite Coating by Argon Arc Cladding

DING Yuan–zhu, ZHAO Guo–gang, WANG Zhen–ting (College of Materials Science and Engineering, Heilongjiang Institute of Science and Technology, Harbin 150027)  
Composite coating reinforced by TiC particle was produced on the surface of Q235 steel by means of a[rgon arc cladding technique with the powder of Ni, Zr and B4C. The microstructure and properties of the coating were investigated and analyzed with the help of scanning electron microscope, X–ray diffraction meter, microhardness tester, friction and wear testing machine. The results indicate that there is a good metallurgical bonding between the composite wating and the substrate.The coating is uniform and almost defect free, it has high hardness which was gradually increased from the bottom to the surface, and has excellent wear resistance under dry sliding wear test condition.
【Fund】: 黑龙江省教育厅科学技术研究项目(11511353)
【CateGory Index】: TG174.441
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 SUN Fang-honga,MA Zhuangb,DONG Shi-zhib,SHI Feng-lib(a.College of Innovation and Practice,b.College of Materials Science and Engineering,Liaoning Technical University,Fuxin 123000,China).;Progress in Research on Cladding Cermet Coatings for Q235 Steel[J];Materials Protection;2012-01
Chinese Journal Full-text Database 5 Hits
1 W. Tillmann,E. Vogli,B. Krebs,A. Ferreira da Cunha (Institute of Materials Engineering, Dortmund University of Technology, Leonhard-Euler Strasse 2, 44227 Dortmund, Germany);Tungsten Carbide and Chromium Carbide Based Coatings Manufactured by Atmospheric Plasma Spraying[J];China Surface Engineering;2008-02
2 ZHANG Si-wei (China University of Petroleum, Beijing 102249, China);Enormous Economy Potential of Tribology application in Industry in China——On the Survey of Present Status of Tribology Application in Industry[J];China Surface Engineering;2008-02
3 Wang Zhenting,Meng Junsheng,Zhao Guogang(Department of Materials Science and Engineering,Heilongjiang Institute of Science and Technology,Harbin 150027,China);Sliding wear behaviors of in-situ synthesis TiC/Ni60A composite coatings by argon arc cladding[J];Powder Metallurgy Technology;2008-03
4 Xiao Daihong,Huang Boyun(State Key Laboratory for Powder Metallurgy,Central South University,Changsha 410083,China);New progress on in situ titanium matrix composites[J];Powder Metallurgy Technology;2008-03
5 ZHANG Xian sheng 1,RAN Guang 2 (1 Panzhihua Iron and Steel (Group) Corporation Office,Panzhihua Sichuan 617067,China; 2 School of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an Shanxi 710049,China);Review of the Reactive Mechanism in Mechanical Alloying[J];Heat Treatment of Metals;2003-06
Chinese Journal Full-text Database 10 Hits
1 ZHANG Bo, XU Bin-shi, XU Yi, WANG Xiao-li (National Key Laboratory for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072 China);Research on the Tribological Performance of Micro- and Nano-phyllosilicate Mineral Lubricating Material[J];China Surface Engineering;2009-01
2 WANG Bao-yang, WANG Yin-zhen, CHENG Guo-dong,FENG Tao (China University of Petroleum (East China ), Dongying Shandong province 257061);Microstructure and Erosive-corrosive Wear Characteristics of Induction Cladded Ni/Cr_3C_2-NiCr Coating[J];China Surface Engineering;2009-01
3 XU Yi1,XU Bin-shi1,SHI Pei-jing1,ZHANG Bao-sen1,2(1.National Key Laboratory for Remanufacturing,Academy of Armored Forces Engineering,Beijing 100072;2.Shanghai Key Laboratory for Materials Laser Processing and Modification,Shanghai Jiaotong University,Shanghai 200240 China);Progress and key Issues of Micro-and Nanoscale Anti-friction Self-repairing Technology[J];China Surface Engineering;2009-02
4 XU Yi, Yu He–long, Zhao Yang, SHI Pei–jing, XU Bin–shi (National Key Laboratory for Remanufacturing, Academy of Armored Force Engineering, Beijing 100072);Study on Tribological Properties of Stratified Silicate Self-repair Materials[J];China Surface Engineering;2009-03
5 LIU-Jun 1,LU Sheng-yong2,Li Fang-fang2(1.College of Materials Science and Engineering,Heilongjiang Institute of Science and Technology,Harbin 150027;2.Nanjing julong steel pipe co.ltd,Nanjing 210061);Microstructure and Wear Resistance of In-situ Synthesis TiC Particulate Reinforced Metal Matrix Composite Coating by Argon Arc Cladding[J];China Surface Engineering;2010-05
6 WANG Zhen-Ting,Zhou Li-Wen(Department of Materials Science and Engineering,Heilongjiang Institute of Science and Technology,Harbin 150027);Microstructure and Wear Resistance of In-situ Synthesis ZrC-ZrB_2 Particulate Reinforced Metal Matrix Composite Coating by Argon Arc Cladding[J];China Surface Engineering;2011-03
7 LEI Qiang 1,2,LI Wen-ya 1,YUAN Jian-hui 2,ZHAN Qing 2,LI Hua 2(1.State Key Laboratory of Solidification Processing,Shaanxi Key Laboratory of Friction Welding Technologies,Northwestern Polytechnical University,Xi'an 710072;2.Division of Surface Engineering,Ningbo Institute of Materials Technology and Engineering,Chinese Academy of Sciences,Ningbo Zhejiang 315201);Effects of Submicron WC Particles Addition on Wear Performances of HVOF Sprayed WC-Co Coatings[J];China Surface Engineering;2012-02
8 WANG Li-min1a,2,XU Yi2,GAO Fei2,YU He-long2,ZHANG Bo2,XU Bin-shi2,QIAO Ying-jie1b(1a.Engineering Training Center,1b.College of Materials Science and Chemical Engineering,Harbin Engineering University,Harbin 150001;2.Science and Technology on Remanufacturing Laboratory,Academy of Armored Force Engineering,Beijing 100072);Tribological Properties of Attapulgite Clay as Lubricant Additive[J];China Surface Engineering;2012-03
9 ZHANG Guan-nan1,WANG Xiao-li1,YIN Yan-li1,CHEN Jiang1,ZHAO Yi-qi2(1.Science and Technology on Remanufacturing Laboratory,Academy of Armored Forces Engineering,Beijing 100072;2.The PLA 66916 Troops,Gaobeidian 074000,Hebei);Tribological Properties of Lubricant for Different Periods Effected by Wear Particles[J];China Surface Engineering;2012-03
10 LEI Ruoshan,WANG Mingpu,GUO Mingxing,LI Zhou,CAO Lingfei,TANG Ning(School of Materials Science and Engineering,Central South University,Changsha 410083);Studies on Cu-Nb Nano-particle Dispersion Strengthened Copper Alloys Prepared by Mechanical Alloying[J];Materials Review;2007-S1
China Proceedings of conference Full-text Database 1 Hits
1 ;Investigation on GTAW of In-Situ Titanium Matrix Composites[A];[C];2012
Chinese Journal Full-text Database 10 Hits
1 XU Xin-jie1,HE Yi1,MA Dong-lin1,LIU Yuan-zhong2(1.Xihua University,Chengdu 610039,China;2.Chengdu Steel & Vanadium Co.,Ltd of Pangang Group,Chengdu 610300,China);Study on the Structure and Thermal Oxidization Properties of Plasma-sprayed Al_2O_3-13%TiO_2 Composite Ceramic Coatings[J];Surface Technology;2010-01
2 Fu Yingqing Zhou Feng Gao Yang Zhang Lizhi (Dalian Maritime University, Dalian 116026, China);Microstructure and Hardness Properties of Low Power Plasma Sprayed WC-Co Cermet Coatings[J];Rare Metal Materials and Engineering;2007-S2
3 Wang Zhenting1,2,Zhou Xiaohui2 (1. Harbin University of Science and Technology,Harbin 150080,China) (2. Heilongjiang Institute of Science and Technology,Harbin 150027,China);Microstructure and Properties of TiC-TiB_2/Fe Composite Coating by Argon Arc Cladding[J];Rare Metal Materials and Engineering;2009-S1
4 Wang Yongdong1),2),Wang Zhenting2),Chen Lili2),Liu Ruitang1)1)(College of Material Science and Chemistry Harbin Engineering University,Harbin 150001,China) 2)(Department of Material Science and Technology,Heilongjiang Institute of Science and Technology,Harbin 150022,China);Property and microstructure of the argon shielded arc clad MoNiSi/Ni_3Si metal silieide alloys composite coating on Q235 steel surface[J];Powder Metallurgy Technology;2009-02
5 Liu Ximing 1,2 Lian Jianshe 2 Zhao Yu 1 (1—Jilin Institute of Technology Changchun Jilin 130012) (2—Jilin University of Technology Changchun Jilin 130025);The Strengthening and Wear Resistance of Argon Arc Cladding Layer[J];MATERIALS FOR MECHANICAL ENGINEERING;2000-03
6 Fu Ruidoug(Yanshan University) Ma Lixin(Hei Longjiang Commercial College);INDUCTION REMELTING PROCESS OF FREE - SPRAYING ALLOY COAT[J];Welding & Joining;2000-11
7 ZHAO Min-hai, LIU Ai-guo, GUO Mian-huan, LIU De-Jian, ( National Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China);Influnce of process parameters on appearance of plasma-melt-sprayed WC-17%Co coatings[J];Transactions of the China Welding Institution;2005-11
8 DU Baoshuai,LI Qingming,WANG Xinhong,ZOU Zengda (School of Materials Science and Engineering,Shandong University,Jinan 250061, China);In situ synthesis of TiC-VC particles reinforced Fe-based metal matrix composite coating by laser cladding[J];Transactions of the China Welding Institution;2007-04
9 ZHANG Zeng-zhi,NIU Jun-jie,FU Yue-wen(Department of Material Science and Engineering, China University of Mining & Technology, Beijing 10083,China);Process and Performance of Nickel-base Alloy Coating by Induction Cladding[J];Transactions of Materids and Heat Treatment;2004-02
10 GONG Wen-biao 1,2,ZHAO He2,SUN Da-qian1(1.School of Materials Science and Engineering, Jilin University, Changchun 130061,China; 2.School of Materials Science and Engingeering, Changchun University of Technology, Changchun 130012,China);Study on microstructure and erosion resistance of Al_2O_3 reinforced Ni-base alloy coating[J];Transactions of Materials and Heat Treatment;2006-01
【Secondary References】
Chinese Journal Full-text Database 3 Hits
1 SUN Fang-hong1a, MA Zhuang1b, SHI Guang-si1c, SONG Xiao-long1c, LI Fu-yong2(1a. College of Innovation and Practise, 1b. College of Materials Science and Engineering, 1c. College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000, China; 2.Zhengzhou Coal Mining Machinery (Group) Company Ltd., Zhengzhou 450016, China).;Effect of Cerium Dioxide on Wear Resistance of Alumina Coating[J];Materials Protection;2012-07
2 SUN Fanghong1,MA Zhuang2,SONG Xiaolong3,SHI Guangsi3,LIU Yingrui2(1.College of Innovation and Practive,Liaoning Technical University,Fuxin Liaoning 123000,China; 2.College of Materials Science and Engineering,Liaoning Technical University,Fuxin Liaoning 123000,China; 3.College of Mechanical Engineering,Liaoning Technical University,Fuxin Liaoning 123000,China);Effect of CeO_2 on corrosion resistance of Al_2O_3 ceramic coating[J];Heat Treatment of Metals;2012-07
3 SUN Fanghong1,SONG Xiaolong2,WANG Enjie3,LIU Yingrui3,CHEN Dongshuai2 (1.College of Innovation and Practive,Liaoning Technical University,Fuxin 123000,China;2.Mechanical Engineering College,Liaoning Technical University,Fuxin 123000,China;3.College of Materials Science and Engineering,Liaoning Technical University,Fuxin 123000,China);Research Progress of Properties for Nano Ceramic Coating on Q235 Steel[J];Hot Working Technology;2013-08
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Lifang Cai, Yongzhong Zhang, Likai Shi, Haoqiang Yang, and Mingzhe Xi National Engineering Research Center for Nonferrous Metal Composites, General Research Institute for Nonferrous Metals, Beijing 100088, China;Research on development of in situ titanium matrix composites and in situ reaction thermodynamics of the reaction systems[J];北京科技大学学报(英文版);2006-06
2 Zhu Xinkun;Lin Qiushi;Chen Tieli;Cheng Baochang;Cao Jianchun(Kunming University of Science and Technology, Department of Materials Science and Engineering, Kunming 650093);RESEARCH AND PROGRESS IN MECHANICAL ALLOYING[J];POWDER METALLURGY TECHNOLOGY;1999-04
3 Wang Erde, Liu Jinglei, Liu Zuyan (School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001);The Research Progression on the Kinetics of Extension Solid Solubility Induced by Mechanical Alloying[J];Powder Metallurgy Technology;2002-02
4 YANG Zhifeng, Lü Weijie, QIN Yexia, ZHANG Di~*(State Key Laboratory of Metal Matrix Composites, Shanghai Jiaotong University, Shanghai 200030, China);EFFECT OF GRAPHITE ADDITION ON TENSILE PROPERTIES OF IN SITU SYNTHESIZED TITANIUM MATRIX COMPOSITES AT HIGH TEMPERATURE[J];Acta Materiae Compositae Sinica;2004-05
5 YANG Zhi-feng~1, L Wei-jie~1, SHENG Xian-feng~(1,2), QIN Ye-xia~1, ZHANG Di~1 (1. Shanghai Jiaotong University, Shanghai 200030, China; 2. The No.5 Steel Co. Ltd of Baosteel Group, Shanghai 200940, China);Mechanical Properties of in situ Synthesized Titanium Matrix Composites at Elevated Temperatures[J];Materials For Mechanical Engineering;2004-03
6 WU Yu ping(Department of Materials Science and Engineering,Shandong University of Science and Technology ,Tai'an 271019,China).;The Behavaior and Structure of TiC Phase in Fe Matrix Alloy and TiC Ceram Cladded by Arc Plasma[J];Transactions of The China Welding Institution;2001-06
8 by LI Yaguo; ZHANG Shaoqing; LI Chunzhi: ZHANG Tixin (Institute of Aeronautical Materials, Belling) (Manuscript received 2 November, 1982; revised manuscript 17 May, 1983);INVESTIGATION OF MICROSTRUCTURE OF CAST Ti ALLOY CONTAINING RARE EARTH[J];Acta Metallurgica Sinica;1984-02
9 ZHOU Lanzhang;GUO Jianting;QUAN Mingxiu(Institute of Metal Research,The Chinese Academy of Sciences,Shenyang 110015);FORMATION MECHANISM OF NiAl/TiC NANOCOMPOSITE BY MECHANICAL ALLOYING[J];ACTA METALLRUGICA SINICA;1997-11
10 WU Xiaolei; CHEN Guangnan(Institute of Mechanics, The Chinese Academy of Sciences, Beijing 100080)Correspondent: WU Xiaolei, postdoctor Tel: 6B547527, Fax: 6B561284,E-mail: xlwu@ccs5.imech. ac. cnManuscript received 1998-03-05;MICROSTRUCTURAL CHARACTERISTICS AND WEAR PROPERLIES OF IN SITU FORMED TiC PARTICLE REINFORCED COATINGS BY LASER CLADDING[J];ACTA METALLRUGICA SINICA;1998-12
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved