Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Surface Technology》 1994-05
Add to Favorite Get Latest Update

Study of the Fundamental Technology of Laser Quench-hardening

Liu Jianglong (Chongqing University)  
The interaction of laser with metal surface was studied. The two basic rules for laser solid heating were reported from the field of heat transfer. The crystal defects residual austenite, hardened martensite and structural inheritance features under the condiction of laser superheating were discussed from the field of physical metallurgy.
【CateGory Index】: TG156
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 5 Hits
1 WANG Xiuyan,et al;Exploration & experiment on die set and die material laser surface harding[J];Metalforming Machinery;2002-02
2 WANG Xiuyan, et al;Review of application of laser transformation hardening in the surface of die intensifying[J];Metalforming Machinery;2001-02
3 WANG Xiuyan,et al;Application research on laser non-consolidation processing of die surface[J];Metalforming Machinery;2001-06
4 WANG Xiu-yan, AN Guo-ping, LI Dong, LIANG Xiao-bing ( College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022, China );On the Application Research of the Non-melted & Curdled Laser Processing of Die Set Surface[J];Journal of Beijing Polytechnic University;2001-04
5 Cai Zhihun, Tian Hongtao, Chen Chao. Zhou Haiguang, Sun Shunong( Department of Physics, Xiamen University, Xiamen 361005 China )Pavel K. Kashkarov( Department of Physics, Moscow University, R.ussia 119899 China);Doping of Zn into InP Induced by YAG Continuous Wave Laser[J];Chinese Journal of Quantum Electronics;2002-05
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Zhang Jiali;Wu Yudao (Shanghai Research Institute of Materials,Shanghai 200437,PRC);Suggestions on How to Develop Die&Mould Steels in China[J];MATERIALS FOR MECHANICAL ENGINEERING;1994-02
2 Beijing University of Aeronautics and Astronautics Wang Xiufeng Hu Shiguang Institute of Mechanics, Academia Sinica Chen Guangnan;Laser forming technology sheet metal[J];FORGING & STAMPING TECHNOLOGY;1998-06
3 Zhang Shan(Tianjin Institute of Laser Techonology) Hu Qingjiang Li Baolin(Tianjin Bo-Hai Radio Factory);A Moulding Heat Treatment by Laser[J];Journal of Optoelectronics·Laser;1990-05
4 Wang Xiuyan, An Guoping, Lin Daosheng, Wang Xiufeng;Review of application of laser dies surface reinforced treatment[J];METALFORMING MACHINERY;2000-04
5 China Ordnance Industries No. 59 Institute Chen Lin;Die Life and Consideration On Side of Failure Analysis[J];Metal Forming Technology;1996-02
6 Guan Yihong,Fan Gang,Chen Tieli,Wang Honggang (Department of Basic Science,Kunming University of Science and Technology,Kunming,650093);Numerical analysis of thermal residual stresses during laser quenching[J];LASER TECHNOLOGY;1998-05
7 Guan Yihong Chen Tieli Chen Junruo Wang Honggang (Department of Basic Science, Kunming University of Science and Technology, Kunming 650093);Numerical Simulation of the Transient Temperature Field and Properties of Metallic Material During Laser Quenching[J];CHINESE JOURNAL OF LASERS;1999-03
8 Ye Yutang Li Zhongdong Hong Yonghe Ye Ling Li Jiaxu (Department of Opto electronic Technology, University of Electronic Science and Technology of China, Chengdu 610054);Continuous Wave CO 2 Laser Induced Diffusion of Zn into GaAs Using a Solid State Diffusion Source[J];CHINESE JOURNAL OF LASERS;1997-03
9 GuoYuanqiang; Tang bin; Zhu Zuchang; Yu Shaoluo(Shanghai University of Engineering Science );STUDY ON TRANSIENT TEMPERATURE FIELD INDUCED BY LASER TRANSFORMATION HARDENING[J];TRANSACTIONS OF METAL HEAT TREATMENT;1994-01
10 Cai Weiping(Materials Department,Wuhan Iron and Steel University,Wuhan 430081);Surface Resiolual Stress of Martensite Stainless Steel Treated by LSM[J];CHINESE JOURNAL OF LASERS;1994-03
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 KONG Dejun ZHANG Yongkang FENG Aixin (School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013;Technologies for Laser Surface Modification Treatment of H13 Hot-working Die Steel[J];Materials Review;2005-08
2 QIU Xing-wu,LI Gang,CHEN Hua,QIU Ling,XIANG Jun,KUANG Jun(Institute of Materials Science and Engineering,Liaoning Technical University,Fuxin Liaoning 123000,China);Development Status and Prospects of Laser Phase Transformation Hardening[J];Heat Treatment Technology and Equipment;2009-01
3 XIE Sheng1,CHEN Chao2,MAO Lu-hong1(1.School of Electronic Information Engineer,Tianjin Unversity,Tianjin 300072,China;2.Department of Physics,Xiamen University,Xiamen 361005,China);A novel method for zinc diffusion in n-type InP[J];Journal of Functional Materials;2009-03
4 YANG Liu-qing,DING Yang-xi,FU Wei,ZHOU Ze-jie(School of Mechanical & Electronic Engineering,East China Jiaotong University,Nanchang Jiangxi 330013,China);Study on Cr12MoV Steel with Wide-band Laser Quenching[J];Heat Treatment of Metals;2006-06
5 MAI Yong-jin,JIE Xiao-hua,LU Guo-hui(Faculty of Materials and Energy,Guangdong University of Technology,Guangzhou,Guangdong 510643,China);ANSYS-based numerical simulation on laser transformation hardening for plastic mould steel[J];Die & Mould Industry;2007-06
6 YAN Zhong-lin~1,YE Hong~21.Engineering Training Center,Chongqing Institute of Technology,Chongqing,China 400050,China;2.School of Materials Science and Engineering,Chongqing Institute of Technology,Chongqing 400050,China;The technique of laser cladding and its application on dies[J];Laser Journal;2006-02
7 DING Yang-xi,YANG Liu-qing,FU wei(School of Mechanical & Electronic Engineering,East China Jiaotong University,Nanchang 330013,China);Research Status and Development of Laser Heat Treatment[J];Mechanical Engineer;2006-01
8 HUANG Sheng-rong,CHEN Chao~*(Department of Physics,Xiamen University,Xiamen 361005,China);Numerical Calculation for the Temperature Distribution of Induced Doping Zn into InP by Pulsed Laser[J];Journal of Xiamen University(Natural Science);2006-05
9 Tian Hong Tao\ Chen Chao (Department of Physics, Xiamen University, Xiamen 361005, China);The analytical calculation of temperature distribution in doping processes of Zn/InP induced by continuous wave laser[J];Acta Physica Sinica;2003-02
10 Huang Sheng-Rong Chen Chao(Department of Physics,Xiamen University,Xiamen 361005,China);Analytical calculation of temperature distribution and thermal deformation during doping of Zn in GaN/Al_2O_3 material induced by nanosecond pulse-width laser[J];Acta Physica Sinica;2007-08
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved