Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Explosion and Shock Waves》 2001-01
Add to Favorite Get Latest Update

Studies on Rapid Spraying by Electrical Explosion Method

LIU Zong de 1,An Jiang ying,YANG Kun 1,HAN Ming bao 2,LU Xin 3 (1.Department of Power Engineering,North China Electric Power University,Beijing 102206,China; 2.Department of Mechanics,Peking University,Beijing 100871,China; 3.Beijing Electro  
By electrical explosion method,a new device developed was used to spray gasified metal with a very high speed on base metal surface.Simplified equations were derived to estimate pulse heating currents.Calculated and measured currents were compared. Tested alloy was 1Cr18Ni9Ti stainless steel.Average coat grain diameter was refined from 26μm to less than 10μm.When initial capacitor voltage was higher than certain levels,a transition layer of rapid solidification between coat and base metal appeared whose crystal sizes were much smaller than that of coat.The hardness values of coats were much higher than that of the original.
【Fund】: 国家自然科学基金项目! (1970 2 0 0 3)
【CateGory Index】: TG174
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 ZHOU Gang-yi,DONG Xin-long,LIU Jun(Mechanicals and Materials Science Research Center,Ningbo University, Ningbo 315211,Zhejiang,China);Experimental Study of Metallic Powder Electrical Explosion[J];Acta Armamentarii;2009-S2
2 SONG Qiu-zhi,DU Xin-wu,LI Qing,WANG Jian-zhong(State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing 100081,China);Preparation of Mo/High-Carbon Steel Composite Coating by Wire Explosion Spraying[J];Transactions of Beijing Institute of Technology;2009-12
3 LIU Zongde, YANG Kun, DUAN Peng, PU Zelin(Department of Power Engineering,North China Electric Power University,Beijing102206,China);An experimental study on preparation of WC-Co coatings with the explodings wires technique[J];Explosion and Shock Waves;2003-02
4 ZHONG Ying-hong(Key Laboratory of Power Plant Equipment Condition Monitoring and Control of Ministry of Education,North China Electric Power University,Beijing 102206);Thermal Cyclic Oxidation Behavior of NiAI Coating Prepared by Electric Thermal Explosion Spray[J];Materials Protection;2009-02
5 ZHU Liang ZHANG Zhouwu (State Key Lab of Gansu New Non-ferrous Metal Materials,Lanzhou University of Technology,Lanzhou 730050);Progress in Ultra-fine Powders Preparation and Spray Coating Using Electrical Explosion Method[J];Materials Review;2005-12
6 YANG Jiazhi, LIU Zhongyang(Department of Electrics & Electronics Engineering, Dalian University of Technology, Dalian 116024);Research Progress in Coating Preparation on Substrate of Materials by Wire Exploding Spray Coating[J];Materials Review;2008-02
7 DU Xinwu,SONG Qiuzhi,WANG Jianzhong(State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing 100081);Contrast Research on Characteristics of Mo and High-carbon Steel with Different Ratio by Wire Explosion Spraying on Inner Face of Al Alloy[J];Materials Review;2009-14
8 MA Zhong-yun,CHEN Hui-yan(1.Beijing Guodian Futong Science and Technology Development Co.,Ltd.,Beijing 100070,China; 2.Insigmc Mechanical & Electrical and Environmental Protection Engineening Co,Ltd.Hangzhou 310007,China);Failure Analysis of Pneumatic Ash Conveying System Abrasion Parts and Its Life Extension technology[J];Electric Power Construction;2008-02
9 WANG Meng1,2,LIU Zong-de1,BAO Zhi-jian1(1.Key Laboratory of Condition Monitoring and Control for Power Plant Equipment of Ministry of Education,North China Electric Power University,Beijing 102206,China;2.Department of Mechanical Engineering,North China Electric Power University,Baoding 071003,China);Study on failure mechanism of H13 steel hot-forging dies for automobile[J];Forging & Stamping Technology;2008-04
10 WEI Shi-cheng,XU Bin-shi,WANG Hai-dou,JIN Guo(Armored Engineering Institute,National Key Laboratory for Remanufacturing Technology,Beijing 100072,China);HIGH TEMPERATURE OXIDATION RESISTANCE OF ELECTRO-THERMAL EXPLOSION PLASMA SPRAY COATING OF FeAl BASE[J];Corrosion & Protection;2007-02
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Xu binshi; Liang Xiubing ;Ma Shining ;Liu Shican;Research on the Newly Developed High Velocity Arc Spray Gun[J];CHINA SURFACE ENGINEERIGN;1998-03
2 Liu Zongde ̄a;Feng Shuping ̄b;Sun Chenwei ̄b;Han Mingbao ̄a(a.Department of Mechanics, Peking University,beijing,100871,China)(b.Southwest Insitute of Fluid Physics,Chengdu 610003,China);STUDIES ON HIGH HEATING RATES APPARATUS[J];EXPLOSION AND SHOCK WAVES;1995-04
3 WANG Qun; YANG Haibin; BAO Haifei; GUO Weili; ZOU Guangtian( National Laboratory of Superhard Materials, Jinn University, Changchun 130023 Department of Astronautics-Electronics and Opto-Electronics,Harbin Institute of Technology, Harbin 150001)(Correspon;ONE-STEP PREPARATION OF ULTRAFINE Cu-Zn ALLOYPOWDERS BY ELECTRICAL EXPLOSION METHOD[J];ACTA METALLRUGICA SINICA;1999-12
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LI Fei 1,ZHAO Xia 1,LI Xin 2,JIN Yuhua 2 (1.College of Vocational Technology,Liaoning Petroleum and Chemical University,Fushun 113001,China;2.Xiaonan Mine,Tiefa Coal Industry Group Co.,Ltd.,Diaobingshan 112700,China);Analysis of valence electron structures of Cu-Zn alloy solid solutions[J];Ordnance Material Science and Engineering;2009-06
2 ZHOU Gang-yi,DONG Xin-long,LIU Jun(Mechanicals and Materials Science Research Center,Ningbo University, Ningbo 315211,Zhejiang,China);Experimental Study of Metallic Powder Electrical Explosion[J];Acta Armamentarii;2009-S2
3 CHEN Yong-xiong 1,LIANG Xiu-bing 1,LIU Yan1,CHENG Jiang-bo 1,2,XU Bin-shi 1(1.National Key Lab for Remanufacturing,Academy of Armored Forces Engineering,Beijing 100072,China;2.School of Material Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,China);Optical Design of Wire Arc Spray Gun Based on Finite Element Modeling[J];Journal of Beijing University of Technology;2011-02
4 Liang Xiubing ; Tian Baohong; Liu Shican;Study on Al Coating Sprayed with High Velocity Arc Spray[J];CHINA SURFACE ENGINEERIGN;1998-04
5 Tian Baohong;Xu Binshi;Ma Shining;Liu Shican;Particle Atomizing Characteristic in High Velocity Arc Spray Process[J];CHINA SURFACE ENGINEERIGN;1999-01
6 Liu Guimin K.J. Kurzyd owski, Xu Binshi, K. Rozniatowski;Research on the Micro-properties of FeCrAl Coatings Prepared by Conventional Arc and High-velocity Arc Spraying Technologies[J];CHINA SURFACE ENGINEERIGN;1999-03
7 Xu Binshi;Expectation of Surface Engineering in the New Century[J];CHINA SURFACE ENGINEERIGN;2000-01
8 Tian Baohong, Xu Bingshi, Ma Shining, Hu Junzhi, Zhang Wei;Erosion Behavior of Fe3Al/WC Intermetallic Matrix Composite Coating Produced By High Velocity Arc spray at Elevated Temperature[J];CHINA SURFACE ENGINEERIGN;2000-01
9 Ma Shining Liu Qian Liang Xiubing;The Investigation on Performance of Zn Coating by High Velocity Arc Spraying[J];CHINA SURFACE ENGINEERIGN;2000-03
10 Xu Binshi Ma Shining Liu Shican Zhu shaohua Liang Xiubing;Progress of Surface Engineering and Remanufacture Engineering in the New Century[J];China Surface Engineerign;2001-01
China Proceedings of conference Full-text Database 2 Hits
1 Liang Xiubing Xu Binshi Ma Shining (Armored Force Engineering Institute, Beijing, 100072);Study on Microstructure and Properties of High Velocity Arc Spray Coatings[A];[C];2001
2 Xu Binshi Ma Shining Liang Xiubing Dong Shiyun Armored Force Institute, Beijing, 100072;Expectation of Surface Engineering and Environment-protected Remanufacture Engineering[A];[C];2001
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Wu Lin lin,Zhan Jing,Li Chang jun,Zhang Chuan fu (Department of Metallurgy Science and Engneering, Central Sorth University,Changsha, Hunan 410083,China);Progress on the Preparation of Ultrafine Cobalt Powder[J];Sichuan Nonferrous Metals;2001-02
2 Zhang Mingqiu Zeng Hanmin (Zhongshan University);ELECTROCONDUCTIVE POLYMER COMPOSITES[J];Engineering Plastics Application;1991-02
3 CHEN Ai-zhi, ZHANG Yong-zhen, CHEN Yue, LI Peng (Dept. of Mater.Eng.,Luoyang Inst.of Technol.,Luoyang 471003,China);Dry sliding wear and friction performances of Ni/WC coatings[J];Ordnance Material Science and Engineering;2002-05
4 HUANG Rui-fen, LUO Jian-min, WANG Chun-qin (No.52 Institute of China Ordnance Industries Group, Baotou 014034, China);Applications and developments of laser cladding technology[J];Ordnance Material Science and Engineering;2005-04
5 XU Zheng, XIA Lian sheng, LIU Xiao chun (China Academy of Engineering Physics, Mianyang 621000, China);Pulsed Plasma Technology Application in the Preliminary Research of TNT Degradation[J];CHINESE JOURNAL OF EXPLOSIVES & PROPELLANTS;1999-04
6 Wang Lu Wang Fuchi Fan Qunbo(Beijing Institute of Technology,Beijing,100081)Liu Guoquan(Beijing University of Science and Technology);NUMERICAL MODEL FOR THERMAL INTERACTION BETWEEN METAL/CERAMIC PARTICLES AND THEIR CONTACT INTERFACE[J];Acta Armamentarii;2001-03
7 CHEN Yong-cai,SONG Qiu-zhi,WANG Jian-zhong(School of Mechatronic Engineering,Beijing Institute of Technology,Beijing 100081,China);New Technologies to Extend the Erosion Life of Gun Barrel[J];Acta Armamentarii;2006-02
8 PAN Jigang, FAN Zishuan, SUN Dongbai, YU Hongying, LI Huiqin, MENG Huimin, WANG Xudong Beijing Corrosion and Protection Center, University of Science and Technology Beijing, Beijing 100083, China;Microstructure and electrochemical properties of molybdenum base amorphous and nanocrystalline alloy coatings by plasma spraying[J];Journal of University of Science and Technology Beijing;2005-04
9 FAN Zishuan, SUN Dongbai, YU Hongying, LI Huiqin, WANG Xudong, MENG Huimin Beijing Corrosion and Protection Center, University of Science and Technology Beijing, Beijing Engineering Research Center for Surface Nano-technology, Beijing 100083,China;Preparation of iron base amorphous and nanocrystalline alloy coatings by plasma spraying[J];Journal of University of Science and Technology Beijing;2005-05
10 WU Qiong, YUAN Shi wei, FENG Chang gen, ZENG Qing xuan (School of Mechano Electronics Engineering, Beijing Institute of Technology, Beijing100081, China);Calculation of Inductance in an Exploding Foil Initiation System[J];Journal of Beijing Institute of Technology;2001-03
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 ZHOU Gang-yi,DONG Xin-long,LIU Jun(Mechanicals and Materials Science Research Center,Ningbo University, Ningbo 315211,Zhejiang,China);Experimental Study of Metallic Powder Electrical Explosion[J];Acta Armamentarii;2009-S2
2 SONG Qiu-zhi,DU Xin-wu,LI Qing,WANG Jian-zhong(State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing 100081,China);Preparation of Mo/High-Carbon Steel Composite Coating by Wire Explosion Spraying[J];Transactions of Beijing Institute of Technology;2009-12
3 DU Xin-wu,SONG Qiu-zhi,WANG Jian-zhong,DUO Ying-xian (State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing 100081,China);Effect of Electrical Parameters on the Coating Performance of Mo by Wire Explosion Spraying[J];Transactions of Beijing Institute of Technology;2010-06
4 DUAN Peng,LIU Zong-de,ZHANG Ying-hua, PU Ze-lin (Department of Power Engineering, North China Electric Power University, Beijing,102206);An Study on Electrical Characteristics of WC-Co Ceramic Foils Produced by Electro-thermal Explosion Spraying Technology[J];China Surface Engineering;2003-04
5 PU Ze-lin ,YANG Kun, LIU Zong-de, MAO Xue-ping (Department of Thermal Power Engineering, North China Electrical Power University, Beijing,102206);Numerical Simulation of Temperature Field For Electrical Explosion Spray Coating[J];China Surface Engineering;2004-01
6 WEI Shi-cheng,XU Bin-shi,WANG Hai-dou,JIN Guo (National Key Laboratory for Remanufacturing, Beijing 100072);The Development and Key Technology Analysis of Electro-thermal Explosion Spray[J];China Surface Engineering;2008-04
7 ZHU Liang, ZHU Jin, BI Xue-song (State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050);Correlation Between Energy Density and Variation of Products in Wire Explosion[J];China Surface Engineering;2010-04
8 ZHANG Wei,GUO Yong-ming,CHEN Yong-xiong (Science and Technology on Remanufacturing Laboratory,Academy of Armored Forces Engineering,Beijing 100072);Applications and Future Development of Thermal Spraying Technologies for Remanufacturing Engineering[J];China Surface Engineering;2011-06
9 DUAN Peng 1,2, LIU Zong-de1, JI Xian-wu2, ZHANG Jian-yong2 (1. Institute of Energy and Power Engineering, North China Electric Power University, Beijing 102206, China; 2. Material Technology Department, East China Electric Power Test & Research Institute, Shanghai 200437, China).;Preparation of WC-Co Alloy Coating by Electrothermal Explosion Ultrahigh Velocity Spraying[J];Materials Protection;2006-03
10 HAN Wei1,MENG Xian-ming1,ZHAO Jie1,ZHANG Jun-bao2(1.School of Material Science and Engineering,Dalian University of Technology,Dalian 116024,China;2.Baosteel Research Institute,Baoshan Iron & Steel Company Ltd.,Shanghai 201900,China);Microstructure as well as Wear and Corrosion Resistance of 304 Stainless Steel Coating Prepared by Cold Spraying[J];Materials Protection;2011-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved