Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《EXPLOSION AND SHOCK WAVES》 1999-01
Add to Favorite Get Latest Update

AN EXPERIMENTAL STUDY ON THE MECHANICAL BEHAVIOR OF A3 STEEL UNDER RAPID HEATING

Han Mingbao a,Liu Zongde b,Liu Yiguang a( a .Beijing University,Beijing,100871) ( b .the North Electric Power University of China,Beijing,100085)  
This paper studies the strength function of A3 steel affected by different heating rates when it was preloaded on the same value.The results show that the heating rates have little effect on free thermal expansion;the bigger the heating rates,the higher the temperatures which lead to the same plastic strain;the heating rates obviously affects A3 steel’s internal function;the heating rates will decide the crystal size after the sample was rapidly heated.
【Fund】: 国家自然科学基金
【CateGory Index】: TG111.3,O343.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 6 Hits
1 Wu Dafang(School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China)Song Hao(National Laboratory Metrology and Calibration of Changcheng Institute of Metrology & Measurement,Beijing 100095,China)Gao Zhentong Yan Zhenqian(School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Mechanical properties of 2A12 Al alloy at transient heating[J];Journal of Beijing University of Aeronautics and Astronautics;2007-05
2 Peng Xianghe 1 Yang Yunmin 1 Chen Yuze 2 Yin Yihui 2 ( 1Department of Engineering Mechanics, Chongqing University, Chongqing, 400044) ( 2Institute of Mechanics, Chinese Academy of Engineering Physics, Mianyang, 621900);INVESTIGATION TO THE TENSILE FAILURE OF LY12 SUBJECTED TO THERMOMECHANICAL LOADING WITH HIGH HEATING-RATE[J];Acta Mechanica Solida Sinica;2005-01
3 TAN Yun, YU Yong, PAN Xiaoxia, LI Guangdong, ZHANG Fangju, FENG Jie, ZHOU DehuiInstitute of Structural Mechanics, China Academy of Engineering Physics, Mianyang 621900RONG Lijian, MA LumingInstitute of Metal Research, The Chinese Academy of Science, Sheny;EFFECT OF HIGH TEMPERATURE THERMAL SHOCKING ON THE MECHANICAL PROPERTY AND MICROSTRUCTURE OF STAINLESS STEEL J75[J];Acta Metallrugica Sinica;2002-07
4 WU Da-fang~1,SONG Hao~2,LI Yong-ting~1,YAN Zhen-qian~1(1.School of Aeronautics Science and Technology,Beijing University of Aeronautics and Astronautics,Beijing 100083,China;2.National Laboratory of Metrology and Calibration of Changcheng Institute of Metrology & Measurement,Beijing 100095,China);A Study on Mechanical Properties of 5A06 Al-Mg Alloy at Transient Heating[J];Journal of Experimental Mechanics;2006-05
5 TAN Yun YU Yong PAN Xiaoxia LI Guangdong ZHANG Fangju FENG Jie (Institute of Structural Mechanics, CAEP, 621900);The Mechanical Property and Damage Mechanism of J75 Alloy Impacted by High Temperature Thermal Shocking(Inhinese)[J];China Nuclear Science and Technology Report;2003-01
6 CHEN Bin,PENG Xiang-he,FAN Jing-hong,SUN Shi-tao College of Resource and Environment Science,Chongqing University,Chongqing 400044,China;Effect of heating-rate on failure temperature of pre-loaded brass H62[J];中国有色金属学会会刊(英文版);2007-S1
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 WANG Lin 1,WANG Fuchi 1,WANG Lu 1,CAI Hongnian 2 (1.Institute of Mechanical Engineering and Automation ,Beijing University of Technology,Beijing 100081,China; 2.Ordnance Equipments Corporation (Group),Beijing 100081,China);Numerical simulation and impact test study of hollow projectiles impacting steel plates[J];Ordnance Material Science and Engineering;2001-06
2 YANG Chao, ZHAO Bao-rong, TIAN Shi-yu, FU Ke-qin (No.52 Institute of China Ordnance Industry, Baotou 014034, China);Numerical simulations on distribution of stress and strain rate in rod penetrator and armor during penetrating[J];Ordnance Material Science and Engineering;2002-03
3 YANG Chao, ZHAO Bao-rong, FU Ke-qin, TIAN Shi-yu(No.52 Institute of China Ordnance Industry, Baotou 014034, China);Behavior of reverse spattering out metal flow in tungsten alloy penetrators penetrating armour[J];Ordnance Material Science and Engineering;2003-03
4 YANG Chao, ZHAO Bao - rang, FU Ke - qin, TIAN Shi - yu, ZHANG Bao - ping, LI Can- bo (P.O.Box4,Baotou 014034,China; Beijing Inst. of Technology,Beijing 100081,China);Research of plastic wave velocity in tungsten alloy penetrators during penetrating[J];Ordnance Material Science and Engineering;2003-04
5 YANG Chao, ZHAO Bao - rang, FU Ke - qin , TIAN Shi - yu (No.52 Institute of China Ordnance Industries, Baotou 014034, China);Influence of tungsten alloy penetrators penetrating armour on target proprty around crater[J];Ordnance Material Science and Engineering;2003-04
6 Ning Junsheng(P Q Box 4,Baotou 014034);Gao Ping;DYNAMIC STRESS RESPONSE OF MATERIALS FOR ROD-PROJECTILE DURING LAUNCH[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1995-02
7 Li Jian;Wang Xiaoming;Zhao Guozhi(Nanjing University of Science & Technology);EFFECTS OF THE ANGLE OF ATTACK FOR A LONG ROD WHEN PERFORATING NORMALLY THROUGH F INITE THICKNESS TARGETS AT BALLISTIC LIMIT VELOCITY[J];Acta Armamentarii;1995-01
8 FANG Qing,ZHAO Guo-zhi,SHEN Pei-hui,HAN Yong-yao(School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing,Jiangsu 210094,China);Study on Penetration Depth of Circular Tube and Rod Penetrator to Homogeneous Steel Target[J];Acta Armamentarii;2005-06
9 LIU Wen\|ting\ LI Yu\|hai\ CHEN Qun\|zhi\ HE Xiao\|fan(Beijing University of Aeronautics and Astronautics, Dept. of Flight Vehicle Design and Applied Mechanics);Accelerated Corrosion Environmental Spectrums for Testing Surface Coatings of Critical Areas of Flight Aircraft Structures[J];Journal of Beijing University of Aeronautics and Astronautics;2002-01
10 CHEN Li, ZHANG Qing ming (State Key Laboratory of Science of Explosion and Safety, Beijing Institute of Technology, Beijing100081, China);Methods of Calculation of the Penetration Depth for Semi-Armor-Piercing Warhead[J];Journal of Beijing Institute of Technology;2002-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 Wu Dafang(School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China)Song Hao(National Laboratory Metrology and Calibration of Changcheng Institute of Metrology & Measurement,Beijing 100095,China)Gao Zhentong Yan Zhenqian(School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Mechanical properties of 2A12 Al alloy at transient heating[J];Journal of Beijing University of Aeronautics and Astronautics;2007-05
2 LIN Mu-sen*,PANG Bao-jun,ZHANG Wei,CHI Run-qiang(Hypervelocity Impact Research Center,Harbin Institute of Technology,Harbin 150001,Helongjiang,China);Experimental investigation on a dynamic constitutive relationship of 5A06 Al alloy[J];Explosion and Shock Waves;2009-03
3 XIA Qing-kun, LIU Zhi-yi, YU Ri-cheng, LI Yun-tao ( Changsha University, Changsha 410003, China; Central South University, Changsha 410083, China);Microstructure and Mechanical Properites of Al-Cu-Mg-Ag Aluminum Alloy in High Temperature Creep Rupture Testing Stress Lasting[J];Materials for Mechanical Engineering;2007-02
4 Li Na,Li Yulong,Guo Weiguo(School of Aeronautics,Northwest Polytechnical University,Xi'an 710072,China);Comparison of Mechanical Properties and Their Temperature Dependencies for Three Aluminium Alloys Under Dynamic Load[J];Acta Aeronautica Et Astronautica Sinica;2008-04
5 YIN YiHui YU ShaoRong(Institute of Systems Engineering,China Academy of Engineering Physics,Mianyang Sichuan,621900,China);RELATIONS BETWEEN INTERNAL FORCES AND DEFORMATION OF A BOLT JOINT WITH THEIR APPLICATION TO DESIGN BASED ON 3D FEM SIMULATION[J];Journal of Mechanical Strength;2008-06
6 SUN Guang-ai1,2,CHEN Bo1,2,WU Er-dong3,LI Xiu-yan3(1.Institute of Nuclear Physics and Chemistry,CAEP,Mianyang 621900,China;2.Institute of Atomic and Molecular Physics,Sichuan University,Chengdu 610065,China;3.Institute of Metal Research,CAS,Shenyang 110016,China);Stress Analysis of J75 Stainless Steel Aftrer Quenching by X-ray Diffraction[J];Physical Testing and Chemical Analysis(Part A:Physical Testing);2009-02
7 YIN Yi-hui~1,CHEN Yu-ze~1,PENG Xiang-he~2 (1.Institute of Systems Engineering,CAEP,P.O.Box 919-401,Mianyang 621900,China;2.Department of Engineering Mechanics,Chongqing University,Chongqing 400044,China);Brief overview of effects of temperature rising rate on mechanical properties of metals[J];High Power Laser and Particle Beams;2006-12
8 WU Da-fang~1,SONG Hao~2,LI Yong-ting~1,YAN Zhen-qian~1(1.School of Aeronautics Science and Technology,Beijing University of Aeronautics and Astronautics,Beijing 100083,China;2.National Laboratory of Metrology and Calibration of Changcheng Institute of Metrology & Measurement,Beijing 100095,China);A Study on Mechanical Properties of 5A06 Al-Mg Alloy at Transient Heating[J];Journal of Experimental Mechanics;2006-05
9 Xia Qingkun~ 1,2, Liu Zhiyi~1, Yu Richeng~1, Li Yuntao~1 (1. Central South University, Changsha, China; 2. Changsha University, Changsha, China);Effects of High Temperature Lasting on Microstructure and Mechanical Properties of Al-Cu-Mg-Ag Aluminum Alloy[J];Special Casting & Nonferrous Alloys;2006-06
10 CHEN Bin,PENG Xiang-he,FAN Jing-hong,SUN Shi-tao College of Resource and Environment Science,Chongqing University,Chongqing 400044,China;Effect of heating-rate on failure temperature of pre-loaded brass H62[J];中国有色金属学会会刊(英文版);2007-S1
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved