Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Packaging Engineering》 2014-07
Add to Favorite Get Latest Update

Workspace Analysis of the Palletizing Robot

YANG Chuan-min;TIAN Shao-long;YANG Meng;LIU Ming-yu;Tianjin University of Commerce;Hebei University of Technology;  
Objective To analyze the robot working- space in the whole robot design process and the pallet packing layout planning process. Methods The kinematics equation was established by using the D- H method and then a four- axis stacking robot was analyzed according to this kinematics equation. At the end,the matrix approach was used to establish the position and pose transformation relationship of palletizing robot. Its positive and inverse kinematics were presented. The calculated results were simulated using the Graphical user interface of software Matlab. Results The work space diagram of the robot,the projection of the workspace in the x- y plane and the projection of the workspace in the x- z plane were obtained. Conclusion The workspace of palletizing robot is displayed in a very intuitive form through the analysis of simulation result attained by the software Matlab.
【Fund】: “十二五”科技支撑计划项目(2011BAD24B01)
【CateGory Index】: TP242
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 YAO Song-liang;LI Duan-neng;ZHOU Xin-yun;ZHENG Xiu-hong;Guangdong University of Technology;;Simulation and Optimization of Workspace of Inclined Guide Surface-articulated Robot Utilizing Linear Drives[J];Packaging Engineering;2014-13
【Citations】
Chinese Journal Full-text Database 10 Hits
1 FU Tie1,LI Jin-quan2,CHEN Ken2,DING Hong-sheng1 (1.School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China;2.Department of Precision Instrument and Mechanology,Tsinghua University,Beijing 100084,China);Novel Design and Implementation of a High-Speed Palletizing Manipulator[J];Transactions of Beijing Institute of Technology;2007-01
2 LI Jin-quan,DUAN Bing-lei,LI Zhong-ming (Automation School,Beijing University of Posts and Telecommunications,Beijing 100876,China);Analysis on Workspace and Influence Coefficients of a Proposed Palletizing Robot[J];Journal of Beijing University of Posts and Telecommunications;2011-06
3 HOU He-ping,LI Sha,LIU Peng,JIANG Zu-yong,ZHANG Hai-yan(Xi'an University of Technology,Xi'an 710048,China);Design of Motion Properties Analysis Software for Paper Gripper Mechanism Based on Matlab[J];Packaging Engineering;2008-02
4 LI Xiao-gang,LIU Jin-hao(Beijing Forestry University,Beijing 100083,China);Research and Application Situation,Problems and Solutions of Palletizing Robots[J];Packaging Engineering;2011-03
5 SHANG Ji-zhong,CHEN An-jun(Jiangnan University,Wuxi 214122,China);Research on the Workspace of 3-PCR Translational Sorting Parallel Robot Based on Geometrical Method[J];Packaging Engineering;2011-17
6 GUO Yong1,WANG Zhen-lin2(1.Hangzhou Zhongneng Construction Detection Limited Company,Hangzhou 310000,China;2.Ningbo Institute of Technology,Zhejiang University,Ningbo 315100,China);Development of Damage Boundary Computation Software for Nonlinear Packaging System Based on MATLAB/GUI[J];Packaging Engineering;2012-17
7 ZHANG Ming,HE Qing-zhong,GUO Shuai(Sichuan University of Science & Engineering,Zigong 643000,China);Mechanical Design and Motion Simulation Analysis of Liquor Automated Production Line Palletizing Robot[J];Packaging Engineering;2013-01
8 LIU Song-guo, ZHU Shi-qiang , LI Jiang-bo, WANG Xuan-yin (State Key Lab of Fluid Power Transmission and Control, Zhejiang University, Hangzhou Zhejiang 310027, China);Research on real-time inverse kinematics algorithms for 6R robots[J];Control Theory & Applications;2008-06
9 Tian Haibo Ma Hongwei Wei Juan (School of Mechanical Engineering,Xi'an University of Science and Technology,Xi'an 710054,China);Workspace and Structural Parameters Analysis for Manipulator of Serial Robot[J];Transactions of the Chinese Society for Agricultural Machinery;2013-04
10 JIANG Hong-chao1,2,LIU Shi-rong2,ZHANG Bo-tao1,2(1.Institute of Automation,East China University of Science and Technology,Shanghai 200237,China;2.Institute of Automation,Hangzhou Dianzi University,Hangzhou 310018,China);Inverse kinematics analysis for 6 degree-of-freedom modular manipulator[J];Journal of Zhejiang University(Engineering Science);2010-07
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Fan1,3,WANG Xia2,LI Long-shu3(1.Department of Computer Science and Technology,Hefei Normal University,Hefei 230601,China;2.Computer Center,Anhui Vocational and Technical College of Press and Publication,Hefei 230601,China;3.Education Ministry Key Laboratory of Intelligent Computing & Signal Processing,Anhui University,Hefei 230039,China);Research on the Direct Kinematic of NAO Model in RoboCup Simulation Platform[J];Journal of Hefei Normal University;2011-03
2 FU Tie1,LI Jin-quan2,CHEN Ken2,DING Hong-sheng1 (1.School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China;2.Department of Precision Instrument and Mechanology,Tsinghua University,Beijing 100084,China);Novel Design and Implementation of a High-Speed Palletizing Manipulator[J];Transactions of Beijing Institute of Technology;2007-01
3 FU Tie1,LI Jin-quan2,YANG Xiang-dong3,DING Hong-sheng1 (1.School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China;2.School of Automation,Beijing University of Posts and Telecommunications,Beijing 100876,China;3.School of Mechanical Engineering,Tsinghua University,Beijing 100084,China);Dynamic Computation and Type-Selection Design of Palletizing Manipulator[J];Transactions of Beijing Institute of Technology;2008-01
4 LI Jin-quan1,DING Hong-sheng 2,DUAN Bing-lei 1,NAN Qian 1,FU Tie2 (1.School of Automation,Beijing University of Post and Telecommunication,Beijing 100876,China;2.School of Mechanical Engineering,Beijing Institute of Technology,Beijing 100081,China);Dynamic Analysis and Structural Optimization of a Novel Palletizing Robot[J];北京理工大学学报(英文版);2010-03
5 HE Bing,SHAO Jun,LIU Dian,HUANG Yong(Hunan University of Technology,Zhuzhou 412008,China);Optimum Design of Fixed Cam and Connecting Bar Mechanism Based on MATLAB[J];Packaging Engineering;2009-09
6 WANG Yao-ting,MA Xue-mei,CHEN An-jun(Jiangnan University,Wuxi 214122,China);Kinematics Analysis of 3-PPRR Translational Sorting Parallel Robot[J];Packaging Engineering;2010-19
7 LI Xiao-gang,LIU Jin-hao(Beijing Forestry University,Beijing 100083,China);Research and Application Situation,Problems and Solutions of Palletizing Robots[J];Packaging Engineering;2011-03
8 LI Xiao-gang,LIU Jin-hao(Beijing Forestry University,Beijing 100083,China);Design of Multifunctional End Effector of Palletizing Robots[J];Packaging Engineering;2011-07
9 SHANG Ji-zhong,CHEN An-jun(Jiangnan University,Wuxi 214122,China);Research on the Workspace of 3-PCR Translational Sorting Parallel Robot Based on Geometrical Method[J];Packaging Engineering;2011-17
10 LI Xiao-gang,LIU Jin-hao(Beijing Forestry University,Beijing 100083,China);Neural Network Adaptive Control for Palletizing Robots Based on Back Stepping[J];Packaging Engineering;2012-01
China Proceedings of conference Full-text Database 1 Hits
1 LIU Feng-chen 1 ,LIU Li-ming 1 ,Zhou Bing-bin 1 ,YAO Yun-feng 1 , GUO Hu-bing 1 ,Zhang Liang-an 2 ,Ma Yin-dong 2 ,Yang Jie 1 (1.Hangzhou Wahaha Group Co., Ltd., Hangzhou, Zhejiang 310009; 2. College of Mechanical Engineering, Anhui University of Technology, Maanshan, Anhui 243032);Estimate for the Motor Parameters of High-speed Heavy Handling Robot Based on Target Trajectory[A];[C];2011
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 LI Jin-quan,DUAN Bing-lei,LI Zhong-ming (Automation School,Beijing University of Posts and Telecommunications,Beijing 100876,China);Analysis on Workspace and Influence Coefficients of a Proposed Palletizing Robot[J];Journal of Beijing University of Posts and Telecommunications;2011-06
2 HOU He-ping,LI Sha,LIU Peng,JIANG Zu-yong,ZHANG Hai-yan(Xi'an University of Technology,Xi'an 710048,China);Design of Motion Properties Analysis Software for Paper Gripper Mechanism Based on Matlab[J];Packaging Engineering;2008-02
3 LI Xiao-gang,LIU Jin-hao(Beijing Forestry University,Beijing 100083,China);Research and Application Situation,Problems and Solutions of Palletizing Robots[J];Packaging Engineering;2011-03
4 SHANG Ji-zhong,CHEN An-jun(Jiangnan University,Wuxi 214122,China);Research on the Workspace of 3-PCR Translational Sorting Parallel Robot Based on Geometrical Method[J];Packaging Engineering;2011-17
5 ZHANG Ming,HE Qing-zhong,GUO Shuai(Sichuan University of Science & Engineering,Zigong 643000,China);Mechanical Design and Motion Simulation Analysis of Liquor Automated Production Line Palletizing Robot[J];Packaging Engineering;2013-01
6 MA Xiaoli1, CHEN Aihua2, ZHANG Xuelian1, ZHANG Qinggong1 (1.Department of Mechanical and Electrical Engineering, Quzhou College, Quzhou Zhejiang 324000,China; 2.School of Mechanical Engineering, Nanhua University, Hengyang Hunan 421001,China);Progress in the Innovation and Application of Parallel Robot Mechanism[J];Machine Tool & Hydraulics;2007-02
7 LI Cheng-wei1,ZHU Xiu-li1,YUN Chao2(1.Robotics Institute,Beihang University,Beijing 100083,China;2.School of Science,Beihang University,Beijing 100083,China);Design and research of stacking robot kinematics[J];Mechanical & Electrical Engineering Magazine;2008-12
8 WU Shengfu;WANG Hongbo;HUANG Zhen First Heavy Factory, Fulcarji Mechanical Dept, Yanshan Univ. Qinhuangdao;STUDY OF WORKSPACE IN PARALLEL ROBOT MANIPULATOR[J];Robot;1991-03
9 Zhao Yanjiang,Zhang Yongde,Jiang Jin'gang,Shao Junpeng ( School of Mechanical and Power Engineering,Harbin University of Science and Technology,Harbin 150080);A Method for Solving Robot Workspace Based on Matlab[J];Mechanical Science and Technology for Aerospace Engineering;2009-12
10 SUN Hao;ZHAO Yu-gang;JIANG Wen-ge;GU Meng;;The structural design and motion analysis of palletizing robot[J];Manufacturing Automation;2013-14
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 FU Tie1,LI Jin-quan2,CHEN Ken2,DING Hong-sheng1 (1.School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China;2.Department of Precision Instrument and Mechanology,Tsinghua University,Beijing 100084,China);Novel Design and Implementation of a High-Speed Palletizing Manipulator[J];Transactions of Beijing Institute of Technology;2007-01
2 FU Tie1,LI Jin-quan2,YANG Xiang-dong3,DING Hong-sheng1 (1.School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China;2.School of Automation,Beijing University of Posts and Telecommunications,Beijing 100876,China;3.School of Mechanical Engineering,Tsinghua University,Beijing 100084,China);Dynamic Computation and Type-Selection Design of Palletizing Manipulator[J];Transactions of Beijing Institute of Technology;2008-01
3 CHAI Chengwen, CAI Jifei, WU Shuqin (Beijing Institute of Graphic Communication, Beijing 102600, China);Motion Design and Analysis of Paper-Transferring Mechanism Up-Swinging Around the Fixed Position[J];Journal of Beijing Institute of Printing;2003-02
4 Cat Jifei; Zhang Zhuming; Zhao Hongbin (Beijing Institute of Printing, Tsinghua University);Motion Anslysis of Eccentric Turning Round and Swinging Gripper Mechanism[J];JOURNAL OF BEIJING INSTITUTE OF PRINTING;1996-01
5 BAI Chuan;WANG Fang (Xi'an Institute of Technology,Xi'an 710032,China);Kinematic Regulation Analysis of Intermittent Rotary Sheet Transfer Mechanism[J];Packaging Engineering;2006-03
6 LU Fu-de1,GAO De1,2,LIANG Ai-feng3(1.Haerbin Commerce University,Haerbin 150028,China;2.Zhejiang University,Ningbo 315100,China;3.No.59 Institute of China Ordnance Industry,Chongqing 400039,China);Study of Damage Boundary Curve of Cubic Non-linear Double Layer Package under Rectangular Pulse[J];Packaging Engineering;2008-12
7 ZHU Zuo-fu,XU Chao,GE Hong-mei (Xuzhou College of Industrial Technology,Xuzhou 221000,China);Applications of Machine Vision in Packaging[J];Packaging Engineering;2010-03
8 WANG Yao-ting,MA Xue-mei,CHEN An-jun(Jiangnan University,Wuxi 214122,China);Kinematics Analysis of 3-PPRR Translational Sorting Parallel Robot[J];Packaging Engineering;2010-19
9 LI Xiao-gang,LIU Jin-hao(Beijing Forestry University,Beijing 100083,China);Research and Application Situation,Problems and Solutions of Palletizing Robots[J];Packaging Engineering;2011-03
10 YU Xiao-ming,GUAN Hui-sheng,ZENG Xiao-fang (College of Mechanical Engineering,Southwest Jiaotong University,Chengdu 610031,China);Simulation Research of Four-freedom Robot in the Stack System of Rice Sack[J];Journal of Heilongjiang Hydraulic Engineering;2008-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved