Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Packaging and Food Machinery》 2005-02
Add to Favorite Get Latest Update

The Application of UG Developing Technology in Designing the Die CAD system

ZHU De- quan1,ZHU De- wen2,ZHOU Jie- min1,SHAO Lu- shou1,LI Bing1(1. College of Engineering, Anhui Agricultural University, Hefei 230036, China; 2. Nanjing Research Institute for Agricultural Mechanization, Nanjin 210014, China)  
Unigraphics is an outstanding mechanical CAD/CAM/CAE integrating software and possesses the good opening property. Development on Unigraphics in different hierarchy can be carried out and the special requirement of users is realized quickly and efficiently. The property of development tools of three-dimension software Unigraphics are introduced in this text. The basic methods and key technology in using them to develop the system are discussed, including the set of users environment?users interface design and programming. Design of the die CAD system is exemplified to detail the concrete application of Unigraphics development tools.
【CateGory Index】: TP391.72
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 YAO Jin, DU Hong wei (Sichuan University, Chengdu 610065,China);Development of 3D parameter packing case CAD system[J];Packaging Engineering;2001-06
2 XU Kai, ZHANG Yu- zhong(School of Mechanical Engineering, Southern Yangtze University, Wuxi 214063, China);The Re-develop Technology of CAD[J];Packaging and Food Machinery;2004-02
3 Huazhong University of Science and Technology Chen Jianquan Xia Juchen Liang Peizhi Hu Guoan HuBei Tri-ring,Gucheng Vehicle-bridge Co.Ltd Zhang Jingang Liu Jiajun Chen Changyin;CAD system of die and technology for rolling forging and die forging for forward shaft.[J];Forging & Stamping Technology;2002-06
4 YAN Xinjian, HUANG Zaowen, JIA Yufu, WEI Lei, DENG Weidong, GUO Xuetang(1 .National Laboratory of Die & Mould Technique,Huazhong University of Science & Technology,Wuhan 430074, Hubei, China;2.Zhongyuan Oil Research Office,Puyang 457001);Data Management & CAD System of Oil Sucker Precision Forging[J];;2003-01
5 YUAN Wei, CHEN Fuxiao, GUO Junqing(Mater.Sci & Eng.Coll.Henan Univ.of Sci.& Technol.Luoyang 471003,Henan China);The Establishment of the Standard Parts Library of Panel Stamping Die CAD[J];;2005-01
6 LUO Yu,QIU Wang-biao(School of Mechanical Engineering,Guizhou University,Guiyang 550003,China);Pre-processing method of point cloud data by using filtering in UG secondary development and its implementation[J];Journal of Lanzhou University of Technology;2008-05
7 ZHANG Rongjia;FU Yun;School of Optoelectronic Engineering,Changchun University of Science and Technology;;Re-development Based on the UG of Dissipating Heat Device Parameterization[J];Journal of Changchun University of Science and Technology(Natural Science Edition);2014-01
8 TIAN Ming;LIU Siyu;School of Opto Electronic Engineering,Changchun University of Science and Technology;;Optical Components Library of UG Secondary Development[J];Journal of Changchun University;2015-08
9 Zhou Xueliang ,Ruan Jingkui (Dept.of Mechanical Engineering,Hubei Automotive Industries Institute,Shiyan442002,China);Parametric Model of Gear Based on UG/Open[J];Journal of Hubei Automotive Industries Institute;2004-02
10 LI Zhong-Ke,ZHANG Yu,LIU Yi,ZHANG Chun-Fei,DAI Li-Ling(CIMS Application & Research Cernter,Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Kunming Yunnan 650093,China);The Second Development of Parameter Designon the Straight-toothed Spur Gear[J];Development & Innovation of Machinery & Electrical Products;2006-05
China Proceedings of conference Full-text Database 1 Hits
1 WEI Run-qiang, GONG Xiao-hong (The 401st Institute of the Fourth Academy of CASC,Xi'an,710025);The Quadratic Exploitation Tools Based on UG[A];[C];2003
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Wu Chongfeng ( College of Material Science & Chemical Engineering, Tianjin University of Science & Technology, Tianjin 300222, China);SECONDARY DEVELOPMENT OF THE PLASTIC INJECTION MOLD[J];Engineering Plastics Application;2004-02
2 Luo Yan (Bio-Mechnical& Electrical Engineering Institute);THE STUDING AND DEVELOPMENT OF FEATURE PRODUCT MODELING TECHNOLOGY[J];;1995-02
3 HAN Jianbao,HAN Shuangqing(School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081, China);Analysis of the Influence of Vehicle Speed and Tire Profile Depth on Tire Aquaplaning[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2003-04
4 Zhu Xijing  Wang Ailing Xin Zhijie (North China Institute of Technology,Taiyuan,030051) Yuan Yi (Beijing University of Aeronautics and Astronautics) Xu Hongjun (Nanjing Unversity of Aeronautics and Astronautics );A STUDY ON THE ULTRASONIC HONING OF MOTOR CYLINDERS[J];Acta Armamentarii;2003-01
5 XU Chun-xia~1,WANG Jian-hua~2(1.Departmemt of Mechanical Engineering ,Beijing Institute of Machinery ,Beijing 100085,China;2.Division of Basic Courses ,Beijing Institute of Machinery ,Beijing 100085,China);Developing method of CAD system based on Pro/ Engingeer[J];Journal of Beijing Institute of Machinery;2004-04
6 (College of Mechanical Engineering, Beijing University of Chemical Technology, Beijing, 100029);Research into the feature based modelling technique[J];JOURNAL OF BEIJING UNIVERSITY OF CHEMICAL TECHNOLOGY;1998-03
7 LI Bin,JIANG Fu-jie(Architecture and Civil Engineering School Inner Mongolia University of Science and Technology,Baotou 014010,China);The modal analysis of the conical tube tower for wind turbine[J];Journal of Inner Mongolia University of Science and Technology;2009-04
8 XU Kai, ZHANG Yu- zhong(School of Mechanical Engineering, Southern Yangtze University, Wuxi 214063, China);The Re-develop Technology of CAD[J];Packaging and Food Machinery;2004-01
9 ZHANG Tie-zhu,CHEN li,LI Dong-sheng School of Mechenical Engineering and Automation of BHU Beijing 10083,China;The application of the parameter templet technologyin design of the automobile panel stamping dies[J];Material Science and Technology;2004-05
10 HUA Manyu (Hunan Light Industry College,Changsha,China 410015);Research on CAD/CAM System of Die[J];Journal of Changsha University;2003-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 LI Shao-shuai,QIAO Li-hong(School of Manufacturing Engineering andAutomation,Beijing University,Beijing 100191,China);Research on the Method of Parametric Design for Group Fixture[J];Group Technology & Production Modernization;2010-03
2 Hu Haiming,Zhang Zihao (Qingdao University of Science & Technology,Qingdao 266061,China);Study of Double Pitch Segments EDM Indexing Table Automatic Generation of Software[J];Electromachining & Mould;2010-05
3 Hu Haiming,Zhang Hao(Qingdao University of Science & Technology,Qingdao 266061,China);Apply of Automatic Generation Technology Segment Tool Electrode Blank Geometry and Cutting Dimension[J];Electromachining & Mould;2013-03
4 LI Di;GUO Peng-wei;L Qing-long;School of Transportation and Vehicle Engineering,Shandong University of Technology;;Conceptual design method for free form headlamp of automobile by case-based reasoning[J];Chinese Journal of Engineering Design;2014-04
5 HU Hai-ming,ZHANG Hao;Design and implementation of double pitch segments EDM indexing table generation software based on VB[J];Die and Mould Technology;2012-05
6 HU Hai-ming,ZHANG Hao;Application of double pitch segments EDM indexing table generation software[J];Die and Mould Technology;2012-06
7 HU Hai-ming;MA Qiang;ZHOU Chuan-hai;;Design of anti-drop steel rib inserts in TBR mould[J];Die and Mould Technology;2014-05
8 ;Typical Hole Parts NC Machining Technology Based on UG Automatic Feature Recognition[J];Aeronautical Manufacturing Technology;2014-Z2
9 SUN Xiao-li,YUAN Guang-ming(School of Mechanical Engineering,Shandong University of Technology,Zibo 255049,China);Processing Technology Methods of Tire Moulds[J];Mechanical Engineering & Automation;2011-04
10 WANG Zhuo,ZHANG Yan,ZONG Chuan-yu,CHEN Xu-ya(School of Computer and Communication Engineering,Liaoning Shihua University,Fushun 113001,China);The Design and Application of the 3D Parameterization Industrial Piping System[J];Microprocessors;2011-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved