Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Transcluction Technology》 2003-01
Add to Favorite Get Latest Update

Measurements of Quality Variables for an Industrial Rolling Mill Reheating Furnace (I)

LIANG\ Jun Institute of System Engineering, Department of Control Science and Engineering National Lab\;of Industrial Control Tech.Zhejiang University Hangzhou, 310027, P. R. China  
The on line slab temperature measurement for an industrial rolling mill reheating furnace is one class of typical hard measuring problem in industrial process. After discussing the difficulty of on line measuring for slab temperature and the influence on process operation, this paper developed two slab temperature soft sensing models, the principal component regression model and partial least square model, based upon multivariable statistical projection technique. As a key step of this work, model verification is presented by using real operating data gathered from industrial experiments. Research results show that the models' precision is good enough to satisfy the engineering demands.This paper is divided into two parts, and this is the first part.
【Fund】: 国家 8 6 3计划的资助 (86 3- 5 11- 92 0 - 0 11和 2 0 0 1AA 4 112 30 )
【CateGory Index】: TG307
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 LIANG Jun Institute of System Engineering, Department of Control Science and Engineering National Lab. of Industrial Control Tech. Zhejiang University, Hangzhou 310027, P.R.China;Measurements of Quality Variables for an Industrial Rolling Mill Reheating Furnace (II)[J];Journal of Transcluction Technology;2003-02
2 LIANG JunInstitute of System Engineering, Department of Control Science and Engineering,National Lab. of Industrial Control Tech. Zhejiang University, Hangzhou 310027, P. R.China;On-line Measurements and Model Analysis of Gas-phase Ethylene Polymerization Process in Fluidized Bed Reactor (I)[J];Journal of Transcluction Technology;2003-03
3 DUAN Yinga,LIN Taob,DUAN Wen-zeb(a.College of Mechanical Engineering;b.College of Electrical Engineering,Chongqing University,Chongqing 400030,China);Converse Illation Method on Optimal Control of Reheating Furnace[J];Journal of Chongqing University(Natural Science Edition);2007-08
4 FEI Zhengshun,HU Bin,YE Lubin,ZHENG Pingyou,LIANG Jun(State Key Laboratory of Industrial Control Technology,Institute of Industrial Control,Zhejiang University,Hangzhou 310027,Zhejiang,China);Optimal grade transition of polymerization process with path constraints[J];CIESC Journal;2010-04
5 LIN Tao1,2, DUAN Wen-ze1,2, LI Chang-chun1,2,ZUO Wei-heng1,2(1. The Key Laboratory of High Voltage Engineering & Electrical New Technology, Ministry of Education Chongqing University, Chongqing 400044,China; 2. College of Electrical Engineering ,Chongqing University, Chongqing 400044,China);Comparison of Modeling Methods for Reheating Furnace[J];Computer Simulation;2008-03
6 LI Fan1,WU Qiang2,YANG Ying-hua2,LIU Xiao-zhi2(1.Measurement and Control Department,Benxi Iron & Steel Company,Benxi 117000,China;2.College of Information Science and Engineering,Northeastern University,Shenyang 110004,China);Recursive PLS Based Adaptive Steel Temperature Soft Sensor Model[J];Control Engineering of China;2007-02
7 CUI Jia-lin,ZHU Tong(College of Mechanical Engineering,Tongji University,Shanghai 200092,China);Numerical Study of the Slab Heating Characteristics and the Loss of Iron Scale in an Experimental Reheating Furnace[J];Energy Conservation Technology;2013-02
8 TANG Wen-wu 1,2 (1.Hunan Metallurgy College of Professional Technology, Zhuzhou 421000,China; 2.School of Energy and Power Engineering, Central South University, Changsha 410083,China);Error of temperature measurement from thermocouple with air pump in the rolling reheat furnace[J];China Measurement Technology;2005-04
9 ;Three-dimensional Temperature Field Prediction Modeling of Steel Slabs[J];Automation Panorama;2009-01
10 ;Visualization Research of Three Dimensional Hot State of Slab Model[J];Automation Panorama;2010-02
【Citations】
Chinese Journal Full-text Database 9 Hits
1 LIANG Jun; LU Yongzai(Zhejiang University);HYBRID INTELLIGENT CONTROL SYSTEM FOR SLAB REHEATING FURNACES[J];IRON AND STEEL;1996-S1
2 LIANG Jun (Zhejiang University);RESEARCH AND DEVELOPMENT ON INTEGRATED COMPUTER CONTROL SYSTEM FOR REHEATING FURNACES[J];IRON AND STEEL;1998-08
3 YANG YONGYAO LU YONGZAI (Zhejiang University);THE DEVELOPMENT OF DYNAMIC MATHEMATICAL MODELS FOR COMPUTER CONTROL OF SLAB REHEAT FURNACES[J];Acta Automatica Sinica;1987-04
4 YANG YONGYAO LU YONGZAI(Zhejiang University);HIERACHICAL COMPUTER CONTROL FOR SLAB REHEATING FURNACE[J];Acta Automatica Sinica;1989-04
5 Yang Yongyao Lu Yongzai Liang Jun (Zhejiang University, Hangzhou);A VARIABLE STRUCTURE CONTROL SCHEME FOR REHEATING FURNACE CONTROL[J];Acta Automatica Sinica;1991-04
6 Liang Jun Yang Yongyao Institute of Industrial Process Control, Zhejiang University, Hangzhou 310027;Mathematical Simulation Models for Slab Reheating Furnace[J];ACTA SIMULATA SYSTEMATICA SINICA;1997-04
7 LIANG Jun YANG Yongyao Yongzai (Zhejiang University);DMES: REAL-TIME EXPERT CONTROL SYSTEM[J];Information and Control;1993-02
8 Yang Yongyao Zhou Xiaoxin (Zhejiang University) (Chongqing Iron & Steel Co.);COMPUTER CONTROL SYSTEM FOR CONTINUOUS REHEATING FURNACE[J];Metallurgical Industry Automation;1987-06
9 Liang Jun (Research Institute of Industrial Process Control National Lab.of Industrial Control Tech.Zhejiang Univ.Hangzhou 310027);Research and Development of Soft sensing Instrument for Slab Temperature measuring Moving in Large Scale Reheating Furnace[J];CHINESE JOURNAL OF SCIENTIFIC INSTRUMENT;1999-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIANG Jun Institute of System Engineering, Department of Control Science and Engineering National Lab. of Industrial Control Tech. Zhejiang University, Hangzhou 310027, P.R.China;Measurements of Quality Variables for an Industrial Rolling Mill Reheating Furnace (II)[J];Journal of Transcluction Technology;2003-02
2 ;Research on Soft Sensor Model for the Inner Temperature of Slab[J];Sensor World;2007-01
3 Zhang Guijun;Chai Tianyou;Zhang Huaguang;Status Quo and Trend of Research on Intelligent Control Based on Different Expert Systems[J];JOURNAL OF NORTHEASTERN UNIVERSITY;1995-05
4 Chao Hai,Wang Wei,Li Xiaoping;Billet Temperatures Prediction Model for Walking Beam Furnace[J];JOURNAL OF NORTHEASTERN UNIVERSITY;1998-05
5 ZHANG Kai-ju, SHAO Cheng~*( Res. Cent. of Inf. and Control, Dalian Univ. of Technol., Dalian 116024, China );Temperature-controlling model of slab′s rough rolling process based on discrete-time state space equation[J];Journal of Dalian University of Technology;2004-06
6 DUAN Yinga,LIN Taob,DUAN Wen-zeb(a.College of Mechanical Engineering;b.College of Electrical Engineering,Chongqing University,Chongqing 400030,China);Converse Illation Method on Optimal Control of Reheating Furnace[J];Journal of Chongqing University(Natural Science Edition);2007-08
7 LIANG Jun (Zhejiang University );RESEARCH ON TROUBLE SHOOTING AND DIAGNOSIS OF REHEATING FURNACE OF A HOT ROLLING MILL[J];Iron and Steel;2003-09
8 ZHANG Kaiju,SHAO Cheng (Research Center of Information and Control, Dalian University of Technology, Dalian 116024);Temperature-oriented Integrated Controlling Technology and Simulation of Slab Hot Rolling Process[J];Iron and Steel;2004-12
9 LIANG Jun; LU Yongzai(Zhejiang University);HYBRID INTELLIGENT CONTROL SYSTEM FOR SLAB REHEATING FURNACES[J];IRON AND STEEL;1996-S1
10 LIANG Jun (Zhejiang University);RESEARCH AND DEVELOPMENT ON INTEGRATED COMPUTER CONTROL SYSTEM FOR REHEATING FURNACES[J];IRON AND STEEL;1998-08
China Proceedings of conference Full-text Database 5 Hits
1 LV Yan 1,2,WU Min 1,LEI Qi 1 1.School of Information Science and Engineering,Central South University,Changsha 410083,P.R.China2.Xi'an Engineering Technology College,Xi'an 710065,P.R.China;An Intelligent Temperature Control System for Nature Gas Reheating Furnace of Titanium[A];[C];2010
2 Yaling Luo~1,Zhuang Chen~2,Liping Wan~1 1.College of Basic Medicine,Chongqing Medical University,Chongqing,400016 2.CIMS Institute,Chongqing University of Technology,Chongqing,400050;Research on the Identification Algorithm and Simulation relating to the Radiation Coefficient of Metallurgical Reheating Furnace[A];[C];2010
3 WANG Zi-di, CHEN Hai-geng, WU bin, Li Guo-jun (Northeastern University 110004);Simulative Study on Reheating Furnace Modeling and Control System[A];[C];2004
4 Ma Zhaobing (1580 hot mill section of Ba-Yu-Quan branch of An-Gang Stock);Research and Application of Energy Saving and Recycling Technology for 1580 Reheating Furnace in An-Gang[A];[C];2008
5 Ma Zhaobing (Bayuquan Filiale Equipment Ensurement Ministry of Ansteel Co.,Ltd.,Yingkou,115007);The Discussion and Research of Remote Malfunction Diagnosis System Technology in Angang 1580 Reheat Furnace Fax Units[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Cui Xiaolong Wan Nili (Zhejiang University) (Hangzhou Iron and Steel Co.);Study on Numerical Simulation of Heat Treatment of Large Forging[J];Angang Technology;2004-06
2 SU Tie - jian, WANG Fu - chi, LI Shu - kui, WANG Lu (Beijing Institute of Technology, Beijing 100081, China);Regression relationships established for thermal conductivity of steels as function of chemical composition at various temperatures[J];Ordnance Material Science and Engineering;2004-05
3 ZHANG Zheng yan (Baosteel Equipment Department,Shanghai China,200941);Establishment and Implementation of Mathematical Model for Ignition Loss in Baosteel HR Reheating Furnace[J];Bao Steel Technology;2003-04
4 QI Xiao-hui, TIAN Qing-min, DONG Hai-rui (Dept. of Optics & Electronics Engineering, Ordnance Engineering College, Shijiazhuang 050003, China);System Modeling Based on System Identification Toolbox in Matlab[J];Ordnance Industry Automation;2006-10
5 MA Ainai (The Institute of RS and GIS,Peking University,Beijing,100871);On Future Development of Geographic Science(GS)[J];Acta Scicentiarum Naturalum Universitis Pekinesis;1996-01
6 MAO Shanjun (Institute of Remote Sensing & GIS of Peking University,Beijing,China,100871);Gray Geographical Information System—the Theory and Technology of Correct Geological Spatial Data Dynamically[J];Acta Scicentiarum Naturalum Universitis Pekinesis;2002-04
7 LIU Qiaoxi MAO Shanjun MA Ainai (Institute of Remote Sensing & GIS of Peking University, Beijing, 100871);Research on the Platform of Coalmine Safety Information Sharing and Decision-Making on the Web[J];Acta Scicentiarum Naturalum Universitis Pekinesis;2004-04
8 MA Jun-ying LUO Yuan-hao PAN Li-deng (College of Information Science and Technology, Beijing University of Chemical Technology, Beijing 100029, China);Development of a kind of software to identify the parameter of PID model and the filter parameter of a closed-loop PID system with NLJ[J];Journal of Beijing University of Chemical Technology;2003-04
9 CAO Jie; XIANG Changxiang; CHEN Dong; QIN Cha; LI Liansheng ( Metallurgy School, UST Beijing, Beijing 100083,China Metallurgical Research Institute, Shijiazhuang 050031, China);Oxidation and Decarbonisation Behavior of Several High Speed Steels[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;2000-01
10 QING Gele, CHENG Susen, YANG Tianjun, LI Shiqi Metallurgical and Ecological Engineering School, University of Science and Technology of Beijing, Beijing 100083, China;Numerical Simulation for the Temperature Field of Slabs Heated in a Walking Beam Type of Re-heating Furnace[J];Journal of University of Science and Technology Beijing;2004-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 LIANG JunInstitute of System Engineering, Department of Control Science and Engineering,National Lab. of Industrial Control Tech. Zhejiang University, Hangzhou 310027, P. R.China;On-line Measurements and Model Analysis of Gas-phase Ethylene Polymerization Process in Fluidized Bed Reactor (I)[J];Journal of Transcluction Technology;2003-03
2 LIANG JunInstitute of System Engineering, Department of Control Science and Engineering,National Lab. of Industrial Control Tech. Zhejiang University, Hangzhou 310027, P. R.China;On-line Measurements and Model Analysis of Gas-phase Ethylene Polymerization Process in Fluidized Bed Reactor (II)[J];Journal of Transcluction Technology;2003-03
3 ZHANG Hong-tao1,DUAN Fa-jie1,DING Ke-qin2,YE Sheng-hua11.State Key Lab of Precision Measurement Technology & Instruments,Tianjin University,Tianjin 300072,China;2.Centre of Boiler and Pressure Vessel Inspection and Research,Beijing 100013,China;Study on On-Line Surface Defect Detection Vision System for Steel Strip[J];Chinese Journal of Sensors and Actuators;2007-08
4 ZHAO Yanyan1,2,LI Tieke1,2(1.Dongling School of Economics and Management,University of Science and Technology Beijing,Beijing 100083,China;2.Engineering Research Center of MES Technology for Iron & Steel Production,Ministry of Education,Beijing 100083,China);Scheduling problem of reheating furnaces with capacity constraint and its heuristic repair algorithm[J];Journal of Liaoning Technical University(Natural Science);2012-03
5 LIU ShengYun;GUO Qing;CHEN Juan;JIN CuiYun;College of Information Science and Technology,Beijing University of Chemical Technology;;Optimal grade transition strategy for a continuous styrene polymerization process[J];Journal of Beijing University of Chemical Technology(Natural Science Edition);2014-05
6 WU Hai-bin;ZHANG Ming;TANG Lei;School of Physics and Material Science,Anhui University;Department of Electronic Engineering,Hefei Normal University;;Identification Method of Slab Surface Temperature and Oxidation Skin Temperature in Heating Furnace[J];Journal of Atmospheric and Environmental Optics;2014-06
7 ZHU Weisu;DONG Bin;LIU Hao;CISDI R&D Co.Ltd.;CISDI Electric Technology Co.Ltd.;;Study and Application of Heating Model for Roller-Hearth Heat Treatment Furnace[J];Industrial Heating;2015-04
8 ZHANG Weijie,LIANG Jun,FEI Zhengshun,YE Lubin(State Key Laboratory of Industrial Control Technology,Institute of Industrial Control,Zhejiang University,Hangzhou 310027,Zhejiang,China);Optimal grade transition in polymerization processes under uncertainty[J];CIESC Journal;2011-10
9 GONG Pei-wen,LI Chun-fu,GE Ming(School of Automation,Hangzhou Dianzi University,Hangzhou Zhejiang 310018,China);Recursive Partial Least Squares and Its Applications[J];Journal of Hangzhou Dianzi University;2011-04
10 Chen Yanqing,Feng Lianfang,Wang Jiajun,Gu Xueping(State Key Laboratory of Polymer Reaction Engineering,College of Materials Scienceand Chemical Engineering,Zhejiang University,Hangzhou 310027,China);Development in modeling the macro-scale phenomena of fluidized bed reactor for polyolefin production[J];Petrochemical Technology & Application;2007-03
China Proceedings of conference Full-text Database 2 Hits
1 GONG Pei-wen,LI Chun-fu,GE Ming (School of Automation,Hangzhou Dianzi University,Hangzhou Zhejiang 310018,China);Recursive Partial Least Squares and Its Applications[A];[C];2011
2 ;Design of surface defect detection and control system for steel plate[A];[C];2015
【Secondary Citations】
Chinese Journal Full-text Database 8 Hits
1 LIANG Jun; LU Yongzai(Zhejiang University);HYBRID INTELLIGENT CONTROL SYSTEM FOR SLAB REHEATING FURNACES[J];IRON AND STEEL;1996-S1
2 YANG YONGYAO LU YONGZAI (Zhejiang University);THE DEVELOPMENT OF DYNAMIC MATHEMATICAL MODELS FOR COMPUTER CONTROL OF SLAB REHEAT FURNACES[J];Acta Automatica Sinica;1987-04
3 YANG YONGYAO LU YONGZAI(Zhejiang University);HIERACHICAL COMPUTER CONTROL FOR SLAB REHEATING FURNACE[J];Acta Automatica Sinica;1989-04
4 Yang Yongyao Lu Yongzai Liang Jun (Zhejiang University, Hangzhou);A VARIABLE STRUCTURE CONTROL SCHEME FOR REHEATING FURNACE CONTROL[J];Acta Automatica Sinica;1991-04
5 YANG Yongyao L(?) Yongzai;Development of Dynamic Optimization Strategy for Reheating Furnaces[J];Information and Control;1987-05
6 JIANG Jiong (Dept.of Industrial Management,Zhejiang Univ,Hangzhou)L(?) Yongzai YANG Yongyao (Zhejiang University,Hangzhou);DEVELOPMENT AND IMPLEMENTATION OF AN OPTIMAL STRATEGY TO A WALKING BEAM REHEATING FURNACE[J];Information and Control;1989-03
7 LIANG Jun YANG Yongyao Yongzai (Zhejiang University);DMES: REAL-TIME EXPERT CONTROL SYSTEM[J];Information and Control;1993-02
8 Yang Yongyao Zhou Xiaoxin (Zhejiang University) (Chongqing Iron & Steel Co.);COMPUTER CONTROL SYSTEM FOR CONTINUOUS REHEATING FURNACE[J];Metallurgical Industry Automation;1987-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved