Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materiais Protection》 2001-09
Add to Favorite Get Latest Update

Effects of Interlayer on Adhesion Strength of TiN Coating

Hu Shu bing,Li Zhi zhang,Cui Kun(Department of Material, Hubei Automobile Industrial Institute,Shiyan,P.R. China 442002).  
Effect of different interlayers on adhesion strength of TiN coating was investigated. The critical load Lc of TiN coating was measured by means of scratch test.The scratch morphology was observed by SEM. The results showed that four kinds of TiN composite coatings possess higher adhesion strength and microhardness than single TiN coating.Among the four kinds of TiN composite coatings Ni W+TiN composite coating possesses best adhesion strength. Interlayer provides a stronger support for top TiN layer. Critical load of TiN coating on M2 substrate is better than that of TiN coating on 3Cr2W8V substrate with lower hardness.
【Fund】: 华中科技大学模具技术国家重点实验室开放基金(98- 13);; 湖北省教育厅科技指导项目 (99C 0 19)
【CateGory Index】: TG174.4
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 5 Hits
1 YANG Shaomin~1,HUANG Nacan~1,ZHANG Zhongxian~2(1 Faculty of Material and Energy, Guangdong University of Technology, Guangzhou 510643; 2 Guangdong Strong Metal Technology Co.LTD, Fushan 528313);Recent Research Progress in Composite: "Nitrided Layer/PVD Coating"[J];Materials Review;2006-02
2 SU Xiu-liang 1, ZHANG Xin-yu 2 (1.Suzhou Anli Chemical Corporation, Jilin Chemical Industry Group, Suzhou 215008; 2.College of Mechanical Engineering, South China University of Technology, Guanghzou 510640);Interfacial Bonding Strength between Surface Coating and Substrate and Its Measurement[J];Electroplating & Pollution Control;2004-02
3 Ru Qiang Huang Nacan Hu Shejun et al;Improvement on Properties of Ti-N Coating by Multi-components and Multi-players Methods[J];Tool Engineering;2004-04
4 Li Hui,Xu Hongbin,Li Runfang;A study on a adhesion strengthen and ION plating process of gear materials[J];Machinery Manufacturing Engineer;2005-03
5 Chen Hao1,2 Yang Jiangaoi1,2 Wang Baojian1 Liu Hailang1 ( 1. School of Materials and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou Jiangxi 341000; 2. Zhangyuan Tungsten Co., Ltd, Ganzhou Jiangxi 341000);Research Status and Expectation on the Coating Techniques of Cemented Carbide Cutting Tool[J];Cemented Carbide;2009-01
Chinese Journal Full-text Database 3 Hits
1 HU Shu\|bing1,2,LI Zhi\|zhang\+1,MEI Zhi\+2 (1\^Dept.of Mater.Sci.and Eng.,Zhejiang University,Hangzhou\ 310027; 2\^State Key Lab.of Die Tech.,Huazhong University of Scie.and Tech.,Wuhan\ 430074, China);Research Development of the TiN PVD Composite Coatings[J];MATERIALS SCIENCE AND ENGINEERING;2000-02
2 Wang Liang, Xu Xiaolei, Xu bin, Hei Zukun (Insitute of Metal Research, Dalian Maritime University,Dalian 116024);Study on Complex Treatment of Ion Nitrocarburizing and TiN Ion Plating[J];TRANSACTIONS OF METAL HEAT TREATMENT;1999-03
3 Hu Shubing 1,2 , Li Zhizhang 2 , Mei Zhi 3 , Ye Xianyun 1 (1 Hubei Automobile Industrial Institute, Shiyan Hubei 442002;\ 2 Department of Material Science and Engineering, Zhejiang University, Hangzhou 310027;\ 3 State Key La;Adhesion Strength and Wear Behavior of Ion Plating TiN Composite Coating with Electric Brush Plating Ni W Interlayer[J];Transactions of Metal Heat Treatment;2000-04
Chinese Journal Full-text Database 10 Hits
1 FANG Lie-bing (Department of Civil Engineering, Hunan City College, Yiyang 413000, China);Wear Resistance of Electric-Brush Plated Ni-P Coating on Cylinder Wall of Piston Compressor[J];Materials Protection;2008-11
2 YANG Shaomin~1,HUANG Nacan~1,ZHANG Zhongxian~2(1 Faculty of Material and Energy, Guangdong University of Technology, Guangzhou 510643; 2 Guangdong Strong Metal Technology Co.LTD, Fushan 528313);Recent Research Progress in Composite: "Nitrided Layer/PVD Coating"[J];Materials Review;2006-02
3 HAO Jian-jun,PU Zhi-guo,ZHAO Jian-guo,LIU Hong-jie,MA Yue-jin (College of Electromechanical Engineering,Agriculture University of Hebei,Baoding 071001,China);Ti(CN) coating sythesized by electric-spark deposition on TC4 titanium alloy[J];Materials Science and Technology;2009-03
4 Hao Jianjun~(1,2) Huang Jihua~1 Li jianchang~2 Zhao Jianguo~2 Chen Zhiqiang~2 (1. University of Science and technology of Beijing, Beijing 100083, China) (2. Agriculture University of Hebei, Baoding 071001, China);Reactive Electrospark Deposition Synthesis TiN Metal Matrix Composite Coating[J];Rare Metal Materials and Engineering;2007-S2
5 XIAO Wei-dong, SHANG Yong-jun, LIU Zhi-hui, DONG Yuan-bao, ZHAO Yong-wu School of Mechanical Engineering, Jiangnan University, Wuxi 214122, China;Tribological properties of electro-brush plated SiC-reinforced nickel-based nanocomposite coatings under dry friction and wear conditions[J];Electroplating & Finishing;2008-09
6 HUANG Xuan-min,HOU Ting-hong,XING Ze-kuan(The No.5719 Factory of P.L.A.Chengdu 611937,China);Research Progress on TiN Coatings and its Composite Coatings[J];Plating & Finishing;2009-02
7 XIE Zhi wei 1,2 , WANG Guo qing 3 , MENG Ji long 1 (1. South China University of Technology, Guangzhou 510040; 2,3. Guangdong University of Technology, Guangzhou 510080, China);Mechanical Films Inproved by Multilayers[J];Materials For Mechanical Engineering;2001-07
8 HAO Jianjun1,2, HUANG Jihua1, ZHAO Jianguo2, CHEN Zhiqiang2 (1.School of Materials Science and Engineering, University of Science and Technology of Beijing, Beijing 100083, China; 2. College of Electromechanical Engineering, Agriculture University of Hebei, Baoding 071001, Hebei, China).;Reactive synthesis TiN reinforced matrix composite coating by electric-spark deposition[J];Transactions of the China Welding Institution;2007-10
9 WU Zhentai (Department of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027);Slurry Erosion Behavior of TiN Coatings on Plasma-Nitrided Ti alloy substrates[J];Transactions of Metal Heat Treatment;2001-03
10 DU Ling-zhong 1,2, XU Bin-shi 1,2, DONG Shi-yun 2, YANG Hua 2, LI Xin 2,TU Wei-yi 2(1. School of Material Science and Engineering, Shanghai Jiaotong University, Shanghai 200030,China;2. National Key Laboratory for Remanufacturing, Academy of Armored Force Engineering, Beijing 100072, China);Sliding Wear Properties of n-Al_2O_3/Ni Electro-Brush Plating Composite Coating[J];Transactions of Materids and Heat Treatment;2004-03
Chinese Journal Full-text Database 10 Hits
1 CHENG Chen(Shanghai Branch, China Southwest Geotechnical Investigation & Survey Institute, Shanghai 201206,China);Nanostructured material's special effects and its applications[J];Journal of Anhui Institute of Architecture;2005-04
3 LIU Ying,QU Zhou-de, WANG Ben-xian(The School of Mechanical Engineering, Northeastern University, Shenyang 110004, China; Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China);Research development and application of Ti6A14V alloy[J];Ordnance Material Science and Engineering;2005-01
4 Jing Yang Pang Siqin Zhou Lanying Zhang Xueheng (School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing, 100081);INVESTIGATION ON THE BONDING STRENGTH AND OTHER PROPERTIES BETWEEN DIFFERENT SUBSTRATES AND COMPOSITE COATINGS[J];Acta Armamentarii;2002-04
5 Xu Zhong(Surface Engineering Research Institute of Taiyuan Polytechnic);Advances, State-of-arts and Perspectives of the Double Glow Surface Alloying Technique[J];;1997-01
6 Dong Jianpeng; Ting Zhirui(Mechanical Engineering Department of Tsinghua University);Analysis of the Fracture Mechanisms of Plastic Coatings under Tensile Stress[J];;1997-01
7 Hu Naisai;Xu Kewei;He Jiawen;Evaluation of Bonding Strength on Coating Layers[J];CHINA SURFACE ENGINEERIGN;1998-01
8 Xu Binshi;Expectation of Surface Engineering in the New Century[J];CHINA SURFACE ENGINEERIGN;2000-01
9 Wang Zhenmin Huang Shisheng Xue Jiaxiang Yu Wensong Deng Yongxing;Current State and Progress of Plasma Spray Equipment[J];China Surface Engineerign;2000-04
10 Shi Changxu Xu Binshi ZhangPing;Development of Surface Engineering in the 21st Century[J];China Surface Engineerign;2001-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 PANG Ying-chun,TAO Jie,ZHANG Shu,WANG Ling,TAO Hai-jun (College of Material Science and Technology,Nanjing University of Aeronautics & Astronautics,Nanjing 210016,China);Interfacial bonding strength of epoxy coating on pure titanium substrate[J];Ordnance Material Science and Engineering;2007-01
2 MA Hong-yu,ZHANG Si-wei (School of Mechanical and Electronic Engineering,University of Petroleum,Beijing 102200 China);Progress in Studies on Tribology of Metal-based Composite Coatings[J];China Surface Engineering;2005-01
3 LI Hui~1, LI Runfang~1, XU Hongbin~2, ZHANG Jin~2(1 State Key Laboratory of Mechanical Transmission, Chongqing University,Chongqing 400044; 2 Department of Materials Science & Engineering, Chongqing Institute of Technology, Chongqing 400050);The Analyses of Sliding-Friction Experiment of 32Cr2MoV with Different Treated Surface[J];Materials Review;2006-11
4 ZHAO Sheng-li~1,WEN Jiu-ba~1,FAN Li-mei~1,ZHU Yao-min~1,SONG Guo-ying~2(1.Institute of Materials,Henan University of Science & Technology,Luoyang 471003,China;2.Anal-colorectal Surgery,150th Center Hospital of PLA,Luoyang 471031,China);Preparation of SiO_x film on Al substrate and it's adhesion[J];Journal of Functional Materials;2006-12
5 LIU Hai-ding1,2,CAO Xu-dong1,2,HE Wen-hai1,2,LI Ji-lin1,2,LIU Ping1,2,CAI Jun1,2(1.National Engineering Research Center For Instrument Functional Materials,Chongqing 400700,China;2.Chongqing Instrument Materials Research Institute,Chongqing 400700,China);Study on the interfacial bonding mechanism of radar absorbingcoatings(Ⅰ):the factors effect on mechanical properties[J];Journal of Functional Materials;2007-07
6 Yin Sumin Ye Yong Feng Aixin Cheng Chang(School of Mechanical Engineering,Jiangsu University,Zhenjiang,Jiangsu 212013,China);Theoretical Analysis and Testing Research of Stress-Strain of Coating Scratched by Infrared Laser[J];Chinese Journal of Lasers;2008-09
7 YANG Hui~(1,2),PAN Shao-ming~2(1.Xi'an Tongli Hydraulic Mechanism-electric Technique Cimited Company,Xi'an 710025,China; 2.The Second Artillery Engineering Institute,Xi'an 710025,China);Bonding mechanism of WC-12Co coatings prepared by supersonic plasma spraying on 45 steel[J];Transactions of Materials and Heat Treatment;2009-03
8 YUAN Jia-dong(Tianwei CemeCon Technology Ltd.,Suzhou Jiangsu 215021,China);Interactive Development of Coating Technology and Modern Cutting Tools[J];Heat Treatment of Metals;2007-08
9 SU Yu-hui1,DONG Xiao-hong1,LIANG Hang1,ZHANG Zhong-xian1,HUANG Na-can 2,LI Bing-xiong2(1.Guangdong Strong Metal Technology Co.,Ltd.,Foshan Guangdong 528313,China; 2.School of Materials and Energy,Guangdong University of Technology,Guangzhou Guangdong 510006,China );Plasma nitriding/plasma plating composite coatings and its properties[J];Heat Treatment of Metals;2008-08
10 ZHAO Shi-lu1,2,LI You1,ZHANG Jun2,WANG Chuang2,LIU Chang-sheng1(1.Key Laboratory of Materials Anisotropy and Texture Engineering,Northeastern University,Shenyang Liaoning 110004,China;2.School of Mechanism Engineering,Shenyang University,Shenyang Liaoning 110044,China);Research progress of nitride coatings on tools[J];Heat Treatment of Metals;2008-09
【Secondary Citations】
Chinese Journal Full-text Database 3 Hits
1 Li Qinglun, Yang Zhongdong, Zhao Zuxin;Precipitation Hardening of NiW Coating[J];MATERIAIS PROTECTION;1999-07
2 ;Progress of Research on Improving the Adhesion of the Interface of Physcial Vapor Deposition TiN Coating/Steel Substrate[J];Materials Review;1999-05
3 Hu Shubing 1, Mei Zhi 2, Li Zhizhang 3 and Zeng Yuewu 3 1 Department of Materials Engineering, Hubei Automobile Industries Institute, Shiyan 442002, P. R. China 2 School of Materials Science and Engineering, Huazhong University of Science and Tech;OXIDATION PROPERTIES OF TiN COATING BY ION PLATING AT HIGH TEMPERATURE[J];THE CHINESE JOURNAL OF NONFERROUS METALS;1999-S1
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved