Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials Protection》 2005-03
Add to Favorite Get Latest Update

Properties of TiN and TiC and Ti(C,N) Coatings and The Factors Affecting the Properties

TANG Da pei, GAO Qing, JIANG Xiao yu (Department of Applied Mechanics and Engineering, Southwest Jiaotong University, Chengdu 610031, China)  
A review was given on the research progress about the TiN and TiC coatings having the same crystal structures as NaCl and isomorphous and miscible with it, and about the Ti(C,N) coating, the solid solution of TiN and TiC as well. The factors affecting the properties of the TiN, TiC, and Ti(C,N) coatings were highlighted. The differences in the properties of the coatings were compared, and the optimization of the properties and reasonable selection of the coatings were discussed. It was pointed out that the three kinds of coatings had excellent mechanical and tribological properties and had been widely used as hard wear resistant coating in cutting tools, drills, and dies. Moreover, it was suggested to pursue further study on the coatings with a view to the properties of the coatings in extremely harsh conditions such as very high or very low temperature and very large load.
【Fund】:  教育部优秀青年教师基金
【CateGory Index】: TG174
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved