Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials Protection》 2008-06
Add to Favorite Get Latest Update

Microstructure and Properties of TiC-TiB_2 Reinforced Ni-Based Coatings Prepared by High Velocity Oxygen Fuel Spraying

WANG Yin-zhen1, LI Fang-po2, SUN Yong-xing1, GAO Hai-jun1, PAN Jiao-liang1 (1. College of Mechanical and Electrical Engineering, China University of Petroleum, Dongying 257061, China; 2. Research Center of Tubular Goods, China Petroleum and Natural Gas Group Corporation, Xi'an 710065, China).  
Two types of nickel-based coatings reinforced with TiC-TiB2 were prepared on AISI-1045 steel substrate using high velocity oxygen fuel (HVOF) spray. The microstructure and properties of the coatings were investigated, using Ni60 coating as a reference. Results showed that the raw material powders containing Ti-B4C reaction ingredients had a much higher flame temperature than Ni60 powder, and the Ni-based coating reinforced with TiC-TiB2 had significantly higher microhardness and wear resistance than Ni60 coating. Moreover, TiC-TiB2 ceramics phase with fine grain size was uniformly distributed and well adhered in metallic matrix in the coating prepared from agglomerated TiC-TiB2-Ni raw material powders, contributing to enhancing the strength, hardness, and wear resistance of the coating. While in the coating prepared from the agglomerated powders of Ti-B4C mechanically mixed with Ni60 powders, the ceramics phase and metallic phase showed obvious segregation, leading to decreased adhesion strength and wear resistance of the coating as well.
【Fund】: 东营市科学技术发展计划基金项目(2005126);; 山东优秀中青年科学家奖励基金(02BS048)
【CateGory Index】: TG174.442
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 5 Hits
1 Gao Yang;Development of Low Power Supply and High Efficiency Plasma Thermal Spray System and Microstructure of Coatings[J];CHINA SURFACE ENGINEERIGN;1999-02
2 ZHAI Chang-sheng1,WU Rui-zhi1, WANG Hai-jun2,ZHOU Shi-kui2 ,SUN Bao-de1 (1 Material Science and Engineering School, Shanghai Jiaotong University, Shanghai 200030,China;2 Material Science and Engineering School, Armored Force Engineering Institute, Beijing 100072,China);Properties of Al_2O_3 Coatings by HEPJet Plasma Spray Method[J];Journal of Materials Engineering;2004-12
3 WANG Yeliang, FU Zhengyi, WANG Hao, ZHANG JinyongWuhan University of Technology, Wuhan 430070,China);SYNTHESIS OF TiB_2-TiC COMPOSITE POWDER BY SHS REDUCTION PROCESS[J];Acta Materiae Compositae Sinica;2003-01
4 WANG Jianjiang~*1,2,DU Xinkang~2,LIU Hongwei~2,LU Daqin~2, XUE Jin~1,PAN Xide~1(1.College of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an710049,China;2.Institute of Advanced Materials,Ordnance Engineering College,Shijiazhuang050003,China);TiC-TiB_2 multiphase ceramic coatings prepared by reactive flame spray[J];Acta Materiae Compositae Sinica;2006-04
5 ZHU Zixin1, XU Binshi1, MA Shining1, DU Zeyu2, LIU Weimin3orce Engineering Institute, Beijing 100072, China;2.School of Material Science & Engineering, Tianjin University, Tianjin 300072, China;cs,Chinese Academy of Sciences, Lanzhou 730000, China);Tribological Properties of Fe-Al/WC Composite Coating Prepared by High Velocity Arc Spraying[J];Tribology;2003-03
Chinese Journal Full-text Database 10 Hits
1 RONG Dinghui1,LIU Yingcai1,ZHOU Yongjun2,ZHANG Yuming1,DING Lili1 (1.Institute of Materials Science and Engineering,Ocean University of China,Qingdao 266100,China;2.Cangzhou Machinery Plant of Hebei,Cangzhou,061001 China);Preparation and performance of Fe-Al intermetallic compound coating by induction remelting[J];Ordnance Material Science and Engineering;2009-02
2 YAN Zhi-jun,GAO Yang,AN Lian-tong;Research on Fluid Properties of Low Energy, High Efficiency and Non-transfer Arc Plasma Torch[J];China Surface Engineering;2002-04
3 ZHANG Ping, WANG Hai-jun, ZHU Sheng, LIANG Zhi-jie (National Key Laboratory for Remanufacturing, Beijing 100072 China);The Development of High Efficiency Supersonic Plasma Spraying System[J];China Surface Engineering;2003-03
4 MA Hong-yu,ZHANG Si-wei (School of Mechanical and Electronic Engineering,University of Petroleum,Beijing 102200 China);Progress in Studies on Tribology of Metal-based Composite Coatings[J];China Surface Engineering;2005-01
5 LI Fang-po, WANG Yin-zhen, WANG wei (College of Mechanical and Electron Engineering, China University of Petroleum, Qingdao Shandong 266555);Research on the Properties of HVOF Ni-based Coatings[J];China Surface Engineering;2006-04
6 YAN Zhi jun, GAO Yang, AN Lian tong (Institute of Materials & Technology, Dalian Maritime University, Dalian 116026, China);Performance Characteristics of Non-Transfer Arc Plasma Spray Torch[J];Materials Protection;2003-11
7 ZHANG Qiao-xin a,b,WANG Xiao-huin b,ZHANG Iiang b(a.School of Mechatronic Engineering,Wuhan University of Tech-nology,b.State Key Laboratory of Advanced Technology for Ma-terials Synthesis and Processing,Wuhan 430070,China);Structures and Properties of Yttrium Stabilized Zirconia Coating Prepared by Plasma Spraying[J];Materials Protection;2009-01
8 LI Fangpo, WANG Yinzhen, WANG Wei(College of Mechanical and Electronic Engineering, China University of Petroleum,Dongying 257061);Research of Microstructure and Properties of HVOF Ni-based Coatings[J];Materials Review;2006-08
9 ZHANG Penglin~(1,2) XIA Tiandong~(1,2) YIN Yan~(1,2) ZHAO Wenjun~(1,2) LIU Tianzuo~(1,2) 1 State Key Lab.of Gansu Advanced Non-ferrous Metal Materials,Lanzhou University of Technology,Lanzhou 730050 2 Key Lab.of Non-ferrous Metal Alloys of the Ministry of Education,Lanzhou University of Technology,Lanzhou 730050;Research Progress in Materials Synthesized by SHS Thermit Reaction[J];Materials Review;2007-10
10 ZHU Zi-xin, LIU Yan, XU Bin-shi, MA Shi-ning, ZHANG Wei(Academy of Armored Forces Engineering, Beijing 100072, China);Influence of Heat Treatment on Microstructure and Wear Behavior of Fe-Al/WC Composite Coatings[J];Journal of Materials Engineering;2004-07
China Proceedings of conference Full-text Database 3 Hits
1 MAO Zheng-ping1,MA Jing1,2 ,SUN Bao-de1,WANG Jun1(1 State Key Laboratory of Metal Matrix Composites, Shanghai Jiaotong University, Shanghai 200240, China;2 Material Institute, Hebei University of Science and Technology, Shijiazhuang 050054, China);Research on the Rheological Property of Composite Ti-Co-B_4C Slurry for Spray Drying[A];[C];2008
2 ZHAO Xiao-qin~(1,2) AN Yu-long~(1,2) CHEN Jian-min~1 ZHOU Hui-di~1 (1.State Key Laboratory of Solid Lubrication,Lanzhou Institute of Chemical Physics,Chinese Academy of Sciences,Lanzhou 730000,China; 2.Graduate School of Chinese Academy of Science,Beijing 100049,China);Elevated Temperature Tribological Properties of Plasma Sprayed Al_2O_3/TiO_2 Coatings from Nanostructured and Microstructurel Feedstocks[A];[C];2008
3 YAN Zhijun GAO Yang Marine Engineering College,DMU,China;Finite element analysis of resident heat stress in sprayed layer[A];[C];2000
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Xu Binshi;Li changjiu;Surface Engineering and Thermal Spraying Technology and their Developments[J];CHINA SURFACE ENGINEERIGN;1998-01
2 Xu binshi; Liang Xiubing ;Ma Shining ;Liu Shican;Research on the Newly Developed High Velocity Arc Spray Gun[J];CHINA SURFACE ENGINEERIGN;1998-03
3 Gao Yang;Development of Low Power Supply and High Efficiency Plasma Thermal Spray System and Microstructure of Coatings[J];CHINA SURFACE ENGINEERIGN;1999-02
4 ZHU Chuncheng QU Wei ZHANG Xianghong HE Xiaodong (Center for Composite Materials ,Harbin Institute of Technology,Harbin 150001,China);Progress in Research on TiC-TiB_2 Composites[J];Materials Review;2003-01
5 ZHU Zi xin 1,2 ,XU Bin shi 2,ZHANG Wei 2,DU Ze yu 1 (1 School of Material Science & Engineering, Tianjin University,Tianjin 300072, China; 2 Department of Material Engineering, Armored Force Engineering Institute, Beijing 100072, China);Microstructure and Properties of Iron Aluminide Coatings Prepared by High Velocity Arc Spraying[J];Journal of Materials Engineering;2002-05
6 Du Xinkang1, Wang Jianjiang1,2, Zhou Long1, Wang Junying1, Ye Minghui1 (1. Ordnance Engineering College, Advance Material Institute, Shijiazhuang 050003, China) (2. Xian Jiaotong University, Xian 710049, China);Processing and Properties of Al_2O_3-Al_2Cu_3 Coatings Produced by SHS Reactive Spraying[J];Rare Metal Materials and Engineering;2004-04
7 LIAO Hengcheng; ZHANG Chunyan; SUN Guoxiong (Department of Mechanical Engineering, Southeast University, Nanjing 210018);APPLICatIONS OF PLASMA SPRAY IN R&D OF ADVANCED MATERIALS[J];CHINESE JOURNAL OF MATERIAL RESEARCH;1999-02
8 WANG Yeliang, FU Zhengyi, WANG Hao, ZHANG JinyongWuhan University of Technology, Wuhan 430070,China);SYNTHESIS OF TiB_2-TiC COMPOSITE POWDER BY SHS REDUCTION PROCESS[J];Acta Materiae Compositae Sinica;2003-01
9 WANG Jianjiang~(1,2,*), DU Xinkang~2, WANG Junying~2, YE Minghui~2, ZHAO Zhongmin~2 (1. Materials Science and Engineering College, Xi'an Jiaotong University, Xi'an 710049, China; 2. Advanced Materials Institute, Ordnance Engineering College, Shijiazhuang 050003, China);MECHANISM OF SHS REACTIVE FLAME SPRAYING Al_2O_3-BASED MULTIPHASE COATING[J];Acta Materiae Compositae Sinica;2004-03
10 Wang Weimin; Fu Zhengyi ; Jin Mingji; Yuan Runzhang(State Key Laboratory for Advanced Technology of Materials Synthesis and Processing,Wuhan University of Technology);FABRICATION OF TiB_2 POWDER BY SHS WITH REDUCTION PROCESS[J];JOURNAL OF THE CHINESE CERAMIC SOCIETY;1996-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved