Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials Review》 2007-02
Add to Favorite Get Latest Update

Research on Fracture and Strengthening Mechanisms of SiCp/6066 Aluminum Matrix Composites with Canned Hot Extrusion

HU Yaobo1, WANG Jingfeng1, PAN Fusheng1, ZUO Rulin1, WANG Wenming1, SONG Wenyuan1, ZENG Sumin2(1 College of Material Science and Engineering, Chongqing University, Chongqing 400044; 2 Southwest Aluminum Industry(Group) Company. Ltd., Chongqing 401326)  
The composites reinforced by silicon carbide(SiC) particulate with various volumes fraction are fabricated by canned hot extrusion. The fracture and strengthening mechanism are studied by micrographs of tensile fracture surface and microstructure of the composites. The results suggest that this composite fracture mechanism is disengagement of the interface and brittle cleavage of the SiC aggregate, and the ultimate tensile strength and 0.2% offset yield strength increase with the increase of SiC reinforcement volumes fraction when this fraction is below 12%.When SiC reinforcement volumes fraction is above 12%,the composite strength increases slowly or decreases. The main strengthening mechanisms are dislocation and dispersion strengthening.
【Fund】: 国家“863”项目(项目编号:2002AA332520);; 重庆市院士基金项目(项目编号:2002-6285)
【CateGory Index】: TB331
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 7 Hits
1 LI Jin,YANG Zhi-chun (School of Aeronautics,Northwestern Polytechnical University,Xi’an 710072,China );Experimental study on the bending strength of SiC_p/Al composite[J];Ordnance Material Science and Engineering;2008-06
2 LI Jin,ZHOU Chunling (1.School of Physics and Electronic Information,Ningxia University,Yinchuan 750021,China;2.Yinchuan College,China University of Mining,Yinchuan 750021,China);Study on the tensile mechanical properties of SiC_p/Al functionally graded materials[J];Ordnance Material Science and Engineering;2010-01
3 LI Xiao,LI Ping,XUE Ke-min,WANG Cheng,ZHANG Kai(School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Effect of High-pressure Torsion on Particle Distribution of SiC_p-Al Composites[J];Journal of Materials Engineering;2012-02
4 WANG Jiao (College of Mechanical Engineering, Qinghai University, Xining Qinghai 810016, China );The Application of Lubricant During the Material Preparation Process for Aluminum and Its Composites[J];Science & Technology Vision;2013-16
5 ZHANG Guozheng,LV Dongteng,WU Zhiming(Department of Mechanical Engineering,Shanxi Defense Vocational and Technical Institute,Xi'an 710302,China);Research of Fabrication and Application for SiC_p Particle Reinforced Aluminum Matrix Composites[J];New Technology & New Process;2010-11
6 LIU Jie,SUN Wei-he(Shenzhen Occupational Polytechnic College,Shenzhen 518055,China);The Development of Preparation Technology of Silicon Carbide Particle Reinforced Aluminum Matrix Composites[J];Rare Metals and Cemented Carbides;2008-02
7 LI Xiao,LI Ping,XUE Ke-min,WANG Cheng (School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Effects of high-pressure torsion pressure on microstructure and mechanical property of SiC_p-Al composites[J];The Chinese Journal of Nonferrous Metals;2012-02
China Proceedings of conference Full-text Database 1 Hits
1 JIN Peng,LIU Yue,LI Shu (Institute Of Metal Research Chinese Academy Of Sciences,Shenyang 110016);Influense of Extrusion on Properties of 2024Al/Al_2O_3/25p composite[A];[C];2008
【Citations】
Chinese Journal Full-text Database 7 Hits
1 Fan Jianzhong;Sang Jimei;Shi Likai, National Engineering & Technology Research Center for Non-Ferrous Metals Composites, Beijing General Research Institute for Non-ferrous Metals, Beijing 100088;Fabrication, Application and Development of Particle Reinforced Aluminium Matrix Composites[J];Materials Review;2001-10
2 ZHAN Meiyan CHEN Zhenghua (School of Materials Science and Engineering,Hunan University,Changsha 410082,China);Research on Strengthening and Fracture Mechanism of SiC Particle Reinforced Al Matrix Composites[J];Materials Review;2004-01
3 Chu Shuangjie and Wu Renjie(Institute of Composite Materials, Shanghai Jiao Tong University,Shanghai 200030);The New Processing Technologies of the Metal Matrix Composite[J];Rare Metal Materials and Engineering;1995-06
4 ;Development Situation and Application Prospects of Metal Matrix Composites[J];Aeronautical Manufacturing Technology;2001-03
5 GONG Hao ran,LI Wen xian (Department of Material Science and Engineering,Central South University of Technology,Changsha 410083,China);Solution Temperature of Spray Deposition for SiCp/6066 Al Composite[J];HEAT TREATMENT OF METALS;2000-06
6 WU Renjie (Shanghai Jiaotong University, Shanghai 200030);THE PRESENT CONDITION AND PROSPECTS ON METAL MATRIX COMPOSITES[J];ACTA METALLRUGICA SINICA;1997-01
7 WANG Wen-ming1,PAN Fu-sheng1,LU Yun2,ZENG Su-min3(1.College of Materials Science and Engineering,Chongqing University,Chongqing 400044,China;2.Faculty of Engineering,Chiba University,Chiba,Japan;3.Southwest Aluminum Industry(Group) Company Ltd.,Chongqing 401326,China);Advance in Research on the Fabrication of SiCp/Al Composites by Stir-casting Process[J];Light Alloy Fabrication Technology;2004-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 XU Ling,SUN Yu-feng (Dept. of Mech. Engn., Anhui University of Technology and Science, Wuhu 241000,China);The studying of preparing Al/Al_2O_3 metal matrix composites with direct oxidation in aluminum melt[J];Journal of Anhui University of Technology and Science;2003-03
2 YOU Xian-qing, REN Hao (Institute of Material Science and Engineering, Hefei University of Technology, Hefei 230009,China);Progress of tribological research on steel-matrix composites reinforced by particles[J];Ordnance Material Science and Engineering;2003-05
3 WANG Wen - ming;PAN Fu - sheng;LU Yun;ZENG Su - min College of Materials Science and Engineering, Chongqing University,Chongqing 400044,China Faculty of Engineering,Chiba University,Chiba,Japan Southwest Aluminum Industry(Group) Company,Chongqing 401326, China;Current status of development and application in SiCp/Al composites[J];Ordnance Material Science and Engineering;2004-03
4 ZHAO Guo-tian1,SUN Shu-jie1,XU Yong-dong1,ZHU Xiu-rong1,CHEN Zhao-feng2(1.Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China;2.College of Material Science and Technology,Nanjing University of Aeronautics &Astronautics,Nanjing 210016,China);High volume aluminum matrix composites prepared by pressureless infiltration[J];Ordnance Material Science and Engineering;2006-02
5 DENG Hua-ling1,SONG Yun-jing1,WANG Yong2,YUE Zeng-wu1 and XIAO Shi-rong1 (1.Department of Materials Science and Engineering,Shandong College of Electric Power,Jinan 250002,China;2.College of Mechanical and Electronic Engineering,China University of Petroleum,Dongying 257061,China);Microstructure and abrasion resistance mechanism of CrB particles reinforced MMC coating[J];Ordnance Material Science and Engineering;2008-01
6 XU Xu-da,JIANG Feng,JIANG Chun-li,TONG Yong-gang,YANG Zu-yong,WANG Lie-xian (School of Materials Science and Engineering,Central South University,Changsha 410083,China);Investigation on friction mechanism and wear behavior of SiC_p/ZL109[J];Ordnance Material Science and Engineering;2008-05
7 HUANG Zanjun, YANG Bin, CUI Hua, DUAN Xianjin, HU Shangchun, ZHANG Jishan (State Key Laboratory for Advanced Mends and Materials, UST Beijing, Beijing 100083, China);Microstructure of Al Matrix Composites Strengthened by Combined In-Situ Alloying Elements and In-Situ Alumina Particulate Strengthening[J];Journal of University of Science and Technology Beijing;2001-03
8 XIE Jianxin1), GUO Zhenwen1), ZHANG Wenquan2), LIU Xuefeng1)1) Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China 2) Materials Science and Engineering College, Beijing University of Technology, Beijing 100022, China;Fabrication and properties of 316L stainless steel/Y-PSZ composites[J];Journal of University of Science and Technology Beijing;2007-05
9 GUO Zhenwen1),ZHANG Wenquan2),LIU Xuefeng1),XIE Jianxin1) 1) School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China 2) College of Materials Science and Engineering,Beijing University of Technology,Beijing 100124,China;Friction wear behaviors of 316L stainless steel/Y-PSZ composites[J];Journal of University of Science and Technology Beijing;2008-07
10 WANG Zhoucheng, NI Yongjin, TANG Yi(Department of Material Science and Engineering, Xiamen University, Xiamen 361005);Research Progress in the Fabrication of Metal Matrix Composites by Electrochemical Methods[J];Materials Review;2006-07
China Proceedings of conference Full-text Database 10 Hits
1 Hu Ming Fei Weidong Zhou Gang Yao Zhongkai Wang Dezun (Harbin Institute of Technology, Materials Science and Engineering, Harbin, 150001) (Northeast Light Alloy Co., Ltd, Harbin, 150060);INFLUENCE OF ALLOY COMPOSITIONS ON STRENGTHENING BEHAVORS OF WHISKER REINFORCED ALUMNIUM MATRIX COMPOSITES[A];[C];2000
2 YU Wei (Zhuhai Institute of Special Equipment Inspection Guangdong,Zhuhai 519000);Process of Powder-coating for Selective Laser Sintering[A];[C];2007
3 ;金属基复合材料的发展现状及展望[A];[C];2007
4 LONG Wenyuan LUO Yan FANG Ligao ZHANG Lipan (Department of Material Science and Engineering Nanchang Institute of Aeronautical Technology Nanchang);Fabrication and Property of Cenospheres-reinforced Al-matrix Composites[A];[C];2006
5 Su Hai~1 Gao Wen-li~1 Zhang Hui~1 Li Luo-xing~1 Lu Jian~2 Lu Zheng~2 1.College of Materials Science and Engineering,Hunan Univ,Changsha,410082,China; 2.Beijing Institute of Aeronautical Materials,Beijing,100095,China;Study on stir cast SiCp/2024 Composites[A];[C];2008
6 GAO Yi-min, ZHANG Guoshang, XING Jian-dong School of Material Science and Engineering, Xi'an Jiaotong University, Xi'an Shaanxi 710049,;Preparation and Wear Resistance of WC Particle Rinforced High Manganese Steel Matrix Surface Composites Mix design of alkali-resistance glass fiber concrete[A];[C];2006
7 Zhang Yunhe Chen Guoqin Wu Gaohui (Center for Mmcs Engineering Technology, Harbin Institute of Technology, Harbin, 150001);Study on Mechanical Properties of C/Al Composite Prepared by Squeeze-Casting[A];[C];2004
8 Hu jin Xu Lixin Yao Zhongkai (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, 150001);EFFECT OF AGEING ON STRESS CORROSION CRACKING BEHAVIOR OF SIC_w/2024AL COMPOSITE[A];[C];2002
9 Zhao Min Wu Gaohui Jiang Longtao (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001);THE STUDY OF SiC PARTICLES REINFORCEMENT ON THE AGING PRECIPITATION BEHAVIOR OF SiCp/LD2 COMPOSITES[A];[C];2002
10 Zhang Guang-an DuZhi-ming Luo Shou-jing School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;Semi-Solid Forming of Aluminum Matrix Composite Materials Reinforced by Short Carbon Fibers[A];[C];2002
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Jian-yun, WANG Lei, ZHOU Xian-liang, HUA Xiao-zhen (Department of Material Engineering, Nanchang Institute of Aeronautical Technology, Nanchang 330034, China);Thermophysical properties of high volume fraction SiC_p/Al composite[J];Ordnance Material Science and Engineering;2006-03
2 LI Jin,YANG Zhi-chun (School of Aeronautics,Northwestern Polytechnical University,Xi’an 710072,China );Experimental study on the bending strength of SiC_p/Al composite[J];Ordnance Material Science and Engineering;2008-06
3 Yang Yunzhi, Dental materials lab., Stomatology College, West China University of Medical Sciences, Chengdu 610041Ran Junguo, Zheng Changqiong, Chen Zhiqing;STUDY PROGRESS AND PROSPECT ON DESIGN FOR FUNCTIONAL GRADIENT MATERIALS[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1998-06
4 Yang Bin Wang Fang Huang Zanjun Duang Xianjin Zhang Jishan (State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083);Advances in Technique for Spray Forming Metal Matrix Composites Reinforced by Particulate[J];Materials Review;2001-03
5 Fan Jianzhong;Sang Jimei;Shi Likai, National Engineering & Technology Research Center for Non-Ferrous Metals Composites, Beijing General Research Institute for Non-ferrous Metals, Beijing 100088;Fabrication, Application and Development of Particle Reinforced Aluminium Matrix Composites[J];Materials Review;2001-10
6 CHEN Yongjun WANG Qudong PENG Jianguo ZHAI Chunquan DING Wenjiang (Light Alloy Net Forming National Engineering Research Center,Shanghai Jiaotong University,Shanghai 200030);Research and Development Prospects of Ultrafine-Grained Materials Fabricated by Severe Plastic Deformation[J];Materials Review;2005-04
7 HAO Bin DUAN Xianjin CUI Hua YANG Bin ZHANG Jishan (State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083);Present Status and Expectation of Metal Matrix Composites[J];Materials Review;2005-07
8 CUI Yan (Institute of Aeronautical Materials, Beijing 100095, China);Aerospace Applications of Silicon Carbide Particulate Reinforced Aluminium Matrix Composites[J];Journal of Materials Engineering;2002-06
9 Le Yongkang Zhang Yinyuan (Luoyang Ship Material Research Institute);Status of Research on Particle reinforced Aluminum Matrix Composites[J];DEVELOPMENT AND APPLICATION OF MATERIALS;1997-05
10 Chu Shuangjie and Wu Renjie(Institute of Composite Materials, Shanghai Jiao Tong University,Shanghai 200030);The New Processing Technologies of the Metal Matrix Composite[J];Rare Metal Materials and Engineering;1995-06
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 LI Jin,ZHOU Chunling (1.School of Physics and Electronic Information,Ningxia University,Yinchuan 750021,China;2.Yinchuan College,China University of Mining,Yinchuan 750021,China);Study on the tensile mechanical properties of SiC_p/Al functionally graded materials[J];Ordnance Material Science and Engineering;2010-01
2 ZHANG Yan1,YOU Xianqing2,LIU Bao2,YI Shaoxia2,DING Feng1(1.Department of Mechanical Engineering,Anhui Vocational and Technical College,Hefei 230011,China;2.School of Material Science and Engineering,Hefei University of Technology,Hefei 230009,China);Research on microstructure of WC/steel composite prepared by centrifugal casting[J];Ordnance Material Science and Engineering;2010-02
3 ZHOU Yongxin,MA Bin,Lü Zhenlin (School of Materials Science and Engineering,Xi′an University of Technology,Xi′an 710048,China);Influence of particle size on microstructures and wear properties of SiCp reinforced Al matrix composite[J];Ordnance Material Science and Engineering;2011-03
4 Ji Kun,Fu Cai-an(School of mechanical engineering,Jiangnan university,Wuxi Jiangsu 214122,China);The production process of SiC prefabricated blocks in the manufacture of SiCp/Al with pressure-infiltration method[J];Mechanical Research & Application;2013-01
5 LIU Zhen-yun,MA Li-qun,WANG Chuan-ting,DING Yi,ZHANG Hua(College of Materials Science and Engineering of Nanjing University of Technology,Nanjing 210009,China);Research on preparation and properties of SiO_2/Al composites[J];Light Alloy Fabrication Technology;2009-12
6 JIA Na,LI Jia-lu(Key Laboratory of Advanced Textile Composite Materials of Ministry of Education,Tianjin Polytechnic University,Tianjin 300160,China);Research progress of flexural properties of composites at different temperatures[J];Journal of Tianjin Polytechnic University;2011-04
7 Song Shaofeng,Ma Youping,Li Xiulan,Lu Shaolong School of Metallurgical Engineering,Xi'an University of Architecture and Technology,Xi'an,China;Melt Treatment and In-situ SiC in Al-20Si Alloy[J];Special Casting & Nonferrous Alloys;2010-11
8 ZHANG Guozheng,LV Dongteng,WU Zhiming(Department of Mechanical Engineering,Shanxi Defense Vocational and Technical Institute,Xi'an 710302,China);Research of Fabrication and Application for SiC_p Particle Reinforced Aluminum Matrix Composites[J];New Technology & New Process;2010-11
9 ZHANG Run-lan,LIU Xiang-rong,AN Qi(College of Chemistry and Chemical Engineering,Xi'an University of Science and Technology,Xi'an 710054,China);Influence of inorganic flux on Mg-Al based composites reinforced with SiC_p[J];Journal of Xi'an University of Science and Technology;2010-06
10 MA Bin,ZHOU Yong-xin(Xi'an University of Technology,School of Materials Science and Engineering,Xi'an 710048,China);Influence of Additional Mg on Microstructures and Wear Properties of SiC_p/Al Composites[J];Foundry Technology;2011-02
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Fan Jianzhong;Sang Jimei;Shi Likai, National Engineering & Technology Research Center for Non-Ferrous Metals Composites, Beijing General Research Institute for Non-ferrous Metals, Beijing 100088;Fabrication, Application and Development of Particle Reinforced Aluminium Matrix Composites[J];Materials Review;2001-10
2 Tao Chunhu;Zhang Shaoqing;Wang Shoukai;Yu Jiantong(Institute of Aeronautical Materials, Beijing) XD (exothermic dispersion);XD Synthesis-New Technology for Fabrication of Metal Matrix Composite[J];JOURNAL OF MATERIALS ENGINEERING;1994-11
3 Xie Guohong(Shanghai Jiao Tong University);Research and Development of Fabrieation Particulates Rciforced Aluminium Composites, by Stir-casting Process[J];JOURNAL OF MATERIALS ENGINEERING;1994-12
4 Liang Shuquan Zheng Ziqiao Tan Chengyu Yin Denfeng Hu Wenbing(Department of Materials Science and Engineering Central SouthUniversity of Technology Changsha,410083);The Microstructure Analyses of the Combustion Wave In Al-TiO_2 System by Self-Propagation High Temperature Synthesis (SHS)[J];Rare Metal Materials and Engineering;1993-04
5 YUAN Guang jiang, ZHANG Wen feng, WANG Dian bin, GUI Man chang, WU Jie jun (National Key Laboratory of Advanced Composites, Beijing Institute of Aeronautical Materials, Beijing 100095);PREPARATION AND CUTTING PROPERTY OF SiC PARTICLES REINFORCED ALUMINUM MATRIX COMPOSITE[J];ACTA MATERIAE COMPOSITAE SINICA;2000-02
6 QI Hai bo, DING Zhan lai, FAN Yun chang, JIANG Zhi qing (Institute of Materials Science and Engineering, Shijiazhuang Railway Institute, Shijiazhuang 050043,China);RESEARCH ON AUTOMOTIVE BRAKE DISCS OF SiC_P/Al COMPOSITE[J];Acta Materiae Compositae Sinica;2001-01
7 Mei Zhi Cui Kun (Department of Materials, Huazhong University of Science and Technology, Wuhan 430074) Gu Mingyuan Wu Renjie (Shanghai Jiao Tong University, Shanghai 200030);STUDY ON THE INTERFACIAL REACTIONS OF LIQUID STIRRED CAST SiC P AND SiO 2 (P) REINFORCED Al 4wt%Mg COMPOSITES[J];ACTA MATERIAE COMPOSITAE SINICA;1998-04
8 Hu Haiping; Rong Yu; Liu Zhenguang ;Han Xun(University of Science and Technology Beijing Beijing 100083 PRC);The Microstructure and Mechanical Behavior of SiC_p/Al Composite[J];MATERIALS FOR MECHANICAL ENGINEERING;1999-06
9 Xu Xiao jing, Wang Wei, Cai Lan (Jiangsu University, Zhenjiang 212013, China);Superplasticity of A SiC_P/6A02 Al Composite[J];Materials For Mechanical Engineering;2002-09
10 WU Renjie (Shanghai Jiaotong University, Shanghai 200030);THE PRESENT CONDITION AND PROSPECTS ON METAL MATRIX COMPOSITES[J];ACTA METALLRUGICA SINICA;1997-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved