Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials Review》 2010-07
Add to Favorite Get Latest Update

Research on Parameter of Preparation of Pyrocarbon with Chemical Vapor Infiltration

XIE Zhiyong,HUANG Qizhong,ZHANG Mingyu,SU Zhe’an,CHEN Jianxun,TAN Ruixuan,LI Jianqing (State Key Laboratory for Powder Metallurgy,Central South University,Changsha 410083)  
Carbon/carbon composites are usually manufactured by chemical vapor infiltration(CVI) process consisting of the gas diffusion and deposition kinetics.Processes control is very important to affect the microstructure of pyrocarbon and the densification rate of carboneous performance.The types of progress parameter in preparation of pyrocarbon with chemical vapor infiltration are reviewed briefly.Four phases of development are recommended.The first parameter includes deposition temperature,furnace pressure,hydrocarbon gas concentration and hydrocarbon gas partial pressure,etc.The second parameter includes homogeneous reaction,heterogeneous reaction and residence time,etc.The third parameter is A s/V R,which is the ratio of surface area of deposition substrate to free volume of reaction gas in the furnace and 'the fourth parameter’ which is being studied by numerical simulations of CVI processes.Carbon deposition from the gas phase on solid substrate has been an object of scientific research for several decades.The trend of development of progress parameter is analyzed.It shows that understanding the deposition mechanism of pyrolytic carbon is a long course.
【Fund】: 国家自然科学基金资助项目(50772134);; 国家重点基础研究发展计划资助项目(2006CB600901)
【CateGory Index】: TB332
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 7 Hits
1 CHEN Sanping LI Hejun (Institute of Carbon-Carbon Composites Materials,Northwestern Polytechnical University ,Xi'an 710072);Progress in Research on Pyrocarbon in C/C Composite Material[J];Materials Review;2002-05
2 XU Guozhong, LI Hejun, ZHANG Shouyang, CHEN Fuxiao, LI Wei, BAI Ruicheng(The Research Center of C/C Composites, Key Laboratory of Ultrahigh Temperature Composites, Northwestern Polytechnical University, Xi'an 710072);Influence of the Parameters of ICVI Technics on Rapid and Uniform Densification of C/C Composites[J];Materials Review;2006-12
3 YU Shu,HUANG Qi-zhong,HUANG Bai-yun,XIONG Xiang,ZHANG Chuan-fu(State Key Laboratory of Powder Metallurgy,Central South University, Changsha 410083,China);Process development of chemistry vapor deposition for C/C composite[J];Materials Science and Engineering of Powder Metallurgy;2006-05
4 LI Jianghong, ZHANG Hongbo, XIONG Xiang~*, WANG Linshan,ZUO Jinlü, HUANG Baiyun (State Key Lab for Powder Metallurgy, Central South University,Changsha 410083, China);GRAPHITIZATION DEGREE OF C/C COMPOSITES WITH VARIOUS FIBRE VOLUME FRACTIONS[J];Acta Materiae Compositae Sinica;2005-03
5 1Xiao Chun, 1Zhu Guangming, 2Hou Weiquan, 2Liu Jianjun (1Northwestern Polytechnical University, Xi’an 710072 2The 43rd Institute of the Fourth Academy of CASC, Xi’an 710025,china);Effect of pyrolysised carbon content on properties of C/C composites[J];Journal of Rocket Propulsion;2005-06
6 YU Shu~1, ZHANG Hong-bo~1,ZHANG Chuan-fu~1,LIAO Ji-qiao~1,DENG Yan-mei~2(1.National Key Lab for Powder Metallurgy,Central South University,Changsha 410083;2.The Teaching and Research Bureau of Beita Borough for Shaoyang City,Shaoyang 422000,Hunan,China);Characterization of Pyrocarbon[J];Journal of Aeronautical Materials;2007-01
7 CHEN Jian-xun, XIONG Xiang, HUANG Qi-zhong, YI Mao-zhong, H UANG Bai-yun State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China;Densification mechanism of chemical vapor infiltration technology for carbon/carbon composites[J];中国有色金属学会会刊(英文版);2007-03
Chinese Journal Full-text Database 10 Hits
1 BAI Ruicheng LI Hejun XI Chen LU Jinhua WANG Lanying (Key Laboratory of Superhigh Temperature Composites,Northwestern Polytechnical University,Xi'an 710072);Developing Tendency on ICVI Processes of C/C Composites[J];Materials Review;2005-04
2 LI Xintao LI Kezhi LI Hejun SUN Wanchang FEI Jie (School of materials science,Northwestern Polytechnical University,Xi'an 710072);Progress in Research on Chemicai Liquid-Vaporized Infiltration for C/C Composites[J];Materials Review;2005-11
3 LI Miaoling1,QI Lehua*1,LI Hejun2 (1.School of Mechatronics,Northwestern Polytechnical University,Xi'an 710072,China;2.School of Materials Science,Northwestern Polytechnical University,Xi'an 710072,China);Image analysis technique for the components of C/C composites[J];Acta Materiae Compositae Sinica;2007-04
4 LI Jianghong,XIONG Xiang*,ZHANG Hongbo,XIAO Peng,HUANG Baiyun (State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Study on the worn surfaces of C/C composites at various braking velocities[J];Acta Materiae Compositae Sinica;2007-04
5 FU Dong-ju1,ZENG Xie-rong2,3,ZOU Ji-zhao2,3,LI Xiao-hua2,3,XIE Sheng-hui2,3,LI Long2,3 (1 School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China;2 College of Materials Science and Engineering,Shenzhen University,Shenzhen 518060,China;3 Shenzhen Key Laboratory of Special Functional Materials,Shenzhen 518060,China);Study on Microstructure of C/C Composites Prepared by Microwave Chemical Vapor Infiltration[J];Journal of Materials Engineering;2009-S1
6 YANG Min,SUN Jin-liang,REN Mu-su,LI Hong,BAI Rui-cheng(School of Materials Science and Engineering,Shanghai University,Shanghai 200072,China);Nanohardness and Elastic Modulus of Pyrocarbon[J];Journal of Shanghai University(Natural Science Edition);2008-05
7 LIU Li-hai,HUANG Qi-zhong,XIE Zhi-yong,WANG Xiu-fei(State Key Laboratory for Powder Metallurgy,Central South University,Changsha 410083,China);MICROSTRUCTURAL CHARACTERIZATION AND MEASUREMENTS OF PYROLYTIC CARBON[J];Carbon Techniques;2007-04
8 Yu Chuanjiang1 Yao Pingping2(1.No.59 Research Institute of China Ordnance Industry,Chongqing 400039,China;2.State Key Laboratory of Powder Metallurgy,Cenral South University,Changsha Hunan 410083,China);Progress and Prospect of Brake Materials for Modern Brake Parts[J];Lubrication Engineering;2010-02
9 LIU Li-hai1,HUANG Qi-zhong1,XIE Zhi-yong1,ZHOU Le-ping1,WANG Xiu-fei1,OU Shi-rong2 (1. State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China;2. Department of Electromechanical & Electronic Engineering,Yiyang Vocational and Technical College,Yiyang 464300,China);Experimental Study on Micro-Positive Pressure Icvi for Preparing C/C Composites[J];Journal of Hunan University of Science & Technology(Natural Science Edition);2007-04
10 HUANG Qi-zhong,LIU Li-hai,XIE Zhi-yong,ZHOU Le-ping,TAN Rui-xuan,GUO Jun(State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Influence of hydrocarbon gas on density and texture of C/C composites prepared by micro-positive ICVI[J];Journal of Central South University(Science and Technology);2008-06
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
2 BAI Ruicheng LI Hejun XI Chen LU Jinhua WANG Lanying (Key Laboratory of Superhigh Temperature Composites,Northwestern Polytechnical University,Xi'an 710072);Developing Tendency on ICVI Processes of C/C Composites[J];Materials Review;2005-04
3 Xiong Xinbo, Li Hejun, Huang Jianfeng, Li Kezhi, Bai Ruicheng, Sun Guolin (C/C Composites Technology Research Center, Northwestern Polytechnic University, Xi’an 710072, China);Bioactive Hydroxypatite Coating on Carbon/Carbon Composite Prepared by Sonoelectrodeposition and Alkaline-Heat Treatment[J];Rare Metal Materials and Engineering;2005-09
4 ZHANG Fuqin,HUANG Qizhong,HUANG Baiyun,GONG Qianming,CHENG Tengfei,XIONG Xiang410083, China);LASER RAMAN MICROSPECTROSCOPY STUDY ON MICROSTRUCTURE OF C/C COMPOSITES[J];Acta Materiae Compositae Sinica;2003-03
5 LIU Hong-lin ~(1,2),JIN Zhi-hao~1,HAO Zhi-biao~2,ZENG Xiao-mei~21. State Key Laboratory Mechnical Behave Material, Xi'an Jiaotong university, Xi'an 710049,China;2.The 43rd Institute of the Fourth Academy of CASC,Xi'an 710025,China.;A study on ablation properties of carbon/carbon composites manufactured by chemical liquid deposition[J];Journal of Solid Rocket Technology;2005-01
6 BAI Rui-cheng, LI He-jun, XU Xiang-yang, XIONG Xin-bo, LI Ai-jun (Key Laboratory of Superhigh Temperature Composites, Northwestern Polytechnical University, Xi′an 710072, China);Highly Efficient ICVI Technology for Preparing Carbon/Carbon Composites[J];Acta Aeronautica Et Astronautica Sinica;2005-02
7 ZHANG Fu qin, HUANG Bo yun , HUANG Qi zhong, XIONG Xiang, LIU Gen shan, YI Mao zhong (Central South University,Changsha 410083,China);The Study of Graphitization Degree of C/C Composites——Recent Advances[J];Mining and Metallurgical Engineering;2000-04
8 YANG Xin,CHEN Hui fang,PAN Ding (College of Material science and Engineering,Donghua University,Shanghai 200051,China);MECHANISM AND KINETICS OF CVD OF PYROLYTIC CARBON[J];Carbon;2002-02
9 Cheng Huiming;Zhang Mingda;Zhou Benlian Institute of Metal Research, Academia Sinica;STUDY ON GRAPHITIZATION BEHAVIOUR OF SHORT CARBON FIBER/PHENOL-CARBON COMPOSITE MATERIALS[J];Carbon Techniques;1989-02
10 M. Inagaki, M. Shiraishi, M. Nakamizo, Y. Hishiyama;THE EVALUATION OF GRAPHITIZATION DEGREE[J];Carbon Techniques;1991-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved