Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Materials Engineering》 2007-09
Add to Favorite Get Latest Update

Fabricating Carbon/Epoxy Primary-load Bearing Cylinders by Thermal Expansion Mould Method

LIU Jun,PENG Chao-yi,DU Gang,ZENG Jing-cheng,XIAO Jia-yu(College of Aerospace and Material Engineering,National University of Defense Technology,Changsha 410073,China)  
The process principle of thermal expansion mould method(TEMM) was illustrated and the key process procedure was further studied.TEMM was utilized to fabricate the carbon/epoxy cylinders that were expected to serve in a large-load bearing thrust structure in the space delivery vehicle.Compared with wound cylinders which fabricated with the same materials and the same size,the axial compressive strength of the TEMM cylinders was much higher than that of the traditional wound cylinders.The micro appearance analysis also indicates that the solidity of TEMM cylinders is better than that of the wound cylinders.
【Fund】: 国家863高技术项目(2004AA724052)
【CateGory Index】: TG306
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 4 Hits
1 Jin Wugang (The 39th Electronics Institute of MII, Xi'an 710065, China);STUDY AND APPLICATION OF THERMAL EXPANSION MOLDING OF COMPOSITE[J];Engineering Plastics Application;2003-04
2 ZENG Jing-cheng,YIN Chang-ping,LIU Jun(College of Aerospace and Material Engineering,NationalUniversity of Defense Technology,Changsha 410073,China);Fabrication of the Cabin Component by Flexible-mould Assisted RTM Process and Its Performance[J];Journal of Materials Engineering;2006-06
3 JIN Wu\|gang(The 39th Electronics Institute of MII,Xian 710065,China);Application of Thermal Expansion Silicone Rubber to Moulding Process of Composites[J];Plastics Science and Technology;2003-02
4 ;New Process of Composite Molding-Thermal Expansion Molding[J];AEROSPACE MATERIALS & TECHNOLOGY;1996-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Jin Wugang, Bai Xiaohong(The 39th Research Institute of CETC, Xi’an 710065, China);DEVELOPMENT OF AERIAL STUDDLE OF CARBON FIBER COMPOSITE[J];Engineering Plastics Application;2004-11
2 YIN Changping, LIU Jun, ZENG Jingcheng, XIAO Jiayu (College of Aerospace and Material Engineering, National University of Defense Technology, Changsha 410073);Application of Silicone Rubber in Polymer Based Composites Molding[J];Materials Review;2006-11
3 Jin Wugang (The 39th Electronics Institute of MII, Xi'an 710065, China);STUDY AND APPLICATION OF THERMAL EXPANSION MOLDING OF COMPOSITE[J];Engineering Plastics Application;2003-04
4 ZENG Jing-cheng,YIN Chang-ping,LIU Jun(College of Aerospace and Material Engineering,NationalUniversity of Defense Technology,Changsha 410073,China);Fabrication of the Cabin Component by Flexible-mould Assisted RTM Process and Its Performance[J];Journal of Materials Engineering;2006-06
5 Tan Guichun, Zhang Xiaoyun, Liu Hongchao (The Magazine House of EPA, Jinan 250031, China);ADVANCE IN THE PROCESSING TECHNOLOGY OF THE ENGINEERING PLASTICS OF CHINA IN 2003[J];Engineering Plastics Application;2004-06
6 Xiao Jiayu Zeng Jingcheng Jiang Dazhi(College of Aerospace and Materials Engineering,NUDT,Changsha,410073);Composite Structures for Aerospace Industry and its Fabrication with Rubber Assisted Resin Transfer Molding[J];Spacecraft Recovery & Remote Sensing;2007-02
7 YIN Chang-ping,LIU Jun,LIU Zhuo-feng,ZHANG Ming-long,ZENG Jing-cheng(College of Aerospace and Material Engineering,National University Defense Technology,Changsha,410073);Study on the Thermal Expansion Properties of Flexible Mold Material for RTM Process[J];Fiber Composites;2006-01
8 YIN Chang-ping,LIU Jun,LIU Zhuo-feng,DAI Xiao-qing,ZENG Jing-cheng(College of Aerospace and Material Engineering,National University of Defense Technology,Changsha,410073);Study on the Process Properties of Flexible Mold Material for RTM[J];Fiber Composites;2006-02
9 WANG Ruonan1,WU Xiaoqing1,LOU Xiaojie2(1.Key Laboratory for Advanced Textile Composites of Ministry of Education,Tianjin Polytechnic University,Tianjin 300160)(2.Harbin FRP Institute,Herbin 150036,China);Application of Silicon Rubber Inflatable Bag in RTM Technology[J];Fiber Composites;2007-04
10 JIN Wu\|gang(The 39th Electronics Institute of MII,Xian 710065,China);Application of Thermal Expansion Silicone Rubber to Moulding Process of Composites[J];Plastics Science and Technology;2003-02
China Proceedings of conference Full-text Database 4 Hits
1 REN Ming-fa,HUANG Qi-zhong,CHEN Hao-ran,LI Tong(State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology, Dalian 116023,Liaoning,China);Numerical Simulation of Soft-mold Aided Process of Viscoelastic Composite Grids Structure[A];[C];2008
2 HUANG Qi-zhong,REN Ming-fa,CHEN Hao-ran,ZHANG Zhong-wei(State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology, Dalian 116023,Liaoning,China);Parameters Match Analysis of the Soft-die Forming Process of Composite Grids Structure[A];[C];2008
3 Jin Wugang (The 39th Electronics Institute of MII, xi'an 710065, China);STUDY AND APPELLATION OF THERMAL EXPANSION MOLDING OF COMPOSITE[A];[C];2002
4 ZHANG Minglong~(1,2) YIN Changping~2 LIANG Jifeng~1 XIAO Jiayu~2 ZENG Jingcheng~2 (1 Deportment of Airport Engineering,Xuzhou Air Force College,Xuzhou 221000;2 College of Aerospace and Material Engineering,National University of Defense Technology,Changsha 410073);Development of Flexible Resin Transfer Molding Process[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 8 Hits
1 zhongWeihong; Liangzhiyong ;Zhang Zuoguang ;Song Huancheng( Beijing University of Aeronautics and Astronautics);RTM and the Application Prospect of RTM in Aviation Industry[J];JOURNAL OF MATERIALS ENGINEERING;1995-01
2 LIANG Zhi yong, DUAN Yue xin,LIN Yun, ZHAO Yan,LU Yao,ZHANG Zuo guang Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Rheological Model and Processing Window of Vinyl Ester Resin System for RTM Process[J];Journal of Materials Engineering;2001-08
3 Ju Jinshan (The 38th Research Institute of MEI);Application Research of Carbon/Epoxy Composite in Measuring Rod of Antenna of Radar[J];TELECOMMUNICATION ENGINEERING;1998-02
4 Shi Dingdu; Gan Changmao (Beijing Aeronautical material Technology Research Institute);THE NEW DEVELOPMENTS OF RTM PROCESS[J];FIBER REINFORCED PLASTICS/COMPOSITES;1994-06
5 Duan Huajun Ma Huiru Wang Jun;RESEARCH STATUS OF RTM PROCESS AT HOME AND ABROAD[J];FIBER REINFORCED PLASTICS/COMPOSITE;2000-05
6 Wo Xiyuan (Beijing Institute of Space Machine & Electricity,Beijing 100076);THE DEVELOPMENT OF RTM MOLDING PROCESS[J];Spacecraft Recovery & Remote Sensing;2000-01
7 ;New Process of Composite Molding-Thermal Expansion Molding[J];AEROSPACE MATERIALS & TECHNOLOGY;1996-06
8 Yuan Ling;Zhen Huasheng;Flexible Thermal Expansion Molding of a Combustion Chamber Liner Formet[J];Aerospace Materials & Technology;1993-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved