Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Materials Engineering》 2007-12
Add to Favorite Get Latest Update

Optimization of Substrate Materials and Preparation of MoS_2 Coated Tools

ZHAO Jin-long,DENG Jian-xin,SONG Wen-long (Department of Mechanical Engineering,Shandong University,Jinan 250061,China)  
Stresses due to thermal mismatch between coating and substrate developed in MoS2-based coatings when cooled down to room temperature from deposition temperature.A 2D finite element model(FEM) for coating substrate system was established to simulate and analyze thermal mismatch stress.Results show that mismatch of coefficient of thermal expansion and Young's modulus is significant to thermal stresses,while Poisson's ratio and thermal conduction coefficient have little influence on them.The effects of deposition temperature on the residual stress were also analyzed.MoS2 coatings composited with Zr were deposited by medium-frequency magnetron sputtering technique on the selected substrates and the properties tested proved the analysis of FEM.
【Fund】: 国家自然科学基金资助项目(50475133);; 新世纪优秀人才支持计划资助项目(NCET-04-0622)
【CateGory Index】: TG711
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Han Chengming Zhou Lanying Jia Qinglian Lang Ping (School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing, 100081);TRIBOLOGICAL BEHAVIOR OF MoS_2 BASE COMPOSITE COATINGS DEPOSITED BY NCUPP PROCESS[J];Acta Armamentarii;2004-03
【Co-citations】
Chinese Journal Full-text Database 3 Hits
1 Zhao Jinlong Deng Jianxin Liu Jianhua;Development and Application of MoS_2 Soft Coating Tool[J];Tool Engineering;2006-07
2 Chai Juan (BP Shanghai Trading Co.,Ltd,Shanghai 200127,China);Outlook of Lubricant Technology Development[J];Synthetic Lubricants;2007-04
3 KANG Jia-jie1,2,LI Guo-lu1,WANG Hai-dou2,LIU Jia-jun3,XU Bin-shi2,ZHU Li-na1,2(1.College of Materials Science and Engineering,Hebei University of Technology,Tianjin 300130,China;2.National Key Lab for Remanufacturing,Academy of Armored Forces Engineering,Beijing 100072,China;3.Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China);Development of Research on the Layered Solid Lubrication Films[J];Heat Treatment of Metals;2007-04
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Han Chengming Zhou Lanying Jia Qinglian Lang Ping (School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing, 100081);TRIBOLOGICAL BEHAVIOR OF MoS_2 BASE COMPOSITE COATINGS DEPOSITED BY NCUPP PROCESS[J];Acta Armamentarii;2004-03
2 Li Zhihua Li Huanxi Xu Huibin Gong Shengkai (School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Residual stress analysis of thermal barrier coatings[J];Journal of Beijing University of Aeronautics and Astronautics;2004-03
3 JING Yang 1,\ PANG Si qin 1,\ ZHANG Xue heng 2,\ XU Cheng jun 1 (1 School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing100081, China; 2 Dept. of Optical Engineering, Beijing Institute of Technology, Beijing;Tribological Performance Investigation of TiAlN-MoS_2/TiAlN Rigid Composite Coatings[J];Journal of Beijing Institute of Technology;2002-04
4 YANG Ding-fu~1, HAN Shu~1, YUAN Wei~2 (1.The Academy of Armoured Forces Engineering, Beijing 100072, China; 2.The Representation of Armoured Forces at the Military Affairs, Xiangtan 411100, China);Study on the Influences of the Substrate Preheating Temperature on the Thermal Residual Stress of the Thermal Barrier Coating[J];Surface Technology;2004-02
5 Hu Shu bing,Li Zhi zhang,Cui Kun(Department of Material, Hubei Automobile Industrial Institute,Shiyan,P.R. China 442002).;Effects of Interlayer on Adhesion Strength of TiN Coating[J];Materiais Protection;2001-09
6 TANG Da pei, GAO Qing, JIANG Xiao yu (Department of Applied Mechanics and Engineering, Southwest Jiaotong University, Chengdu 610031, China);Properties of TiN and TiC and Ti(C,N) Coatings and The Factors Affecting the Properties[J];Materials Protection;2005-03
7 ZHANG Xiao-ling;HU Nai-sai;HE Jia-wen(State Key Laboratory for Mechanical Properties of Materials,Xi'an Jiaotong University, Xi'an 710049, China );Study on the Methods to Improve the Propertiesof Sputtering Deposited MoS_2 Films[J];JOURNAL OF MATERIALS ENGINEERING;1999-10
8 MA Zhuang, WANG Quan sheng ,WANG Fu chi, LU Guang shu (School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing 100081,China);Substrate Influence on Residual Stress of Gradient Coating[J];Journal of Materials Engineering;2002-04
9 CAO Tong-kun, DENG Jian-xin, SUN Jun-long (Department of Mechanical Engineering, Shandong University, Jinan 250061, China);Study on Self-lubricating Al_2O_3/TiC/CaF_2 Ceramic Composites[J];Journal of Materials Engineering;2005-03
10 ZHANG Wu-zhuang,LIU Yong,HUANG Bai-yun(State Key Laboratory for Power Metallurgy,Central South University,Changsha,Hunan,410083,China);DEVELOPMENT OF COATING TCHNOLOGY OF CEMENTED CARBIDES[J];Powder Metallurgy Industry;2006-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved