Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Materials Engineering》 2008-12
Add to Favorite Get Latest Update

Aging Treatment of Cu-Fe Supersaturated Solid Solution Prepared by Mechanical Alloying

SHUAI Ge-wang,FANG Ping,GUO Zheng-hua,LU Bai-ping(School of Materials and Engineering,Nanchang Hangkong University,Nanchang 330063,China)  
The effect of aging treatment on hardness and electrical conductivity of Cu-xFe(x=1,2,4,mass fraction/%) supersaturated solid solutions prepared by mechanical alloying was investigated.The X-ray results showed that the solubility of Fe in Cu increased due to the internal strain and microstructural refinement caused by ball milling.The solubility of Fe in Cu can be extended to 4% after 32h ball milling.Meanwhile,the copper grain size and lattice parameter decreased to 20nm and 0.3621nm respectively.The aging treatment can promote the decomposition of the supersaturated solid solution which decreased the hardness and improve the electrical conductivity.The microhardness of the cold press formed Cu-4Fe alloy powders decreased from 175 to 96,and the electrical conductivity increased from 35%IACS(International Annealed Copper Standard) to 60%IACS.
【Fund】: 南昌航空大学科研基金资助项目(EA200501145)
【CateGory Index】: TG146.11
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 4 Hits
1 Liu Ping; Cao Xingguo; Kang Buxi; Huang Jinliang; Gu Haicheng;MICROSTURCTURE AND PROPERTIES OF RAPIDLY SOLIDIFIED Cu - Cr MLLOY WITH HIGH - STRENGTH HIGH - CONDUCTIVITY[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1999-01
2 XIA Dong-sheng~1, LI Bo~2, GUO Jian-ting~3, LI Gu-song~3, YU Yan~1(1 Dalian Maritime University, Dalian 116026, China;2 The Northeast University, Shenyang 110006, China;3 Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China);In-situ TiC Particles Reinforced Nano-composite Synthesized by Mechanical Alloying NiAl(Co)-TiC Powders[J];Journal of Materials Engineering;2004-09
3 Bai zhenhai;Li Wenxian;Tang Rong;Tang Dunqiang Department of Materials Science and Engineering, Central South University, Changsha 410083, China;The milling parameters of the making Ni-based solid soluted ultrafine powder by mechanical alloying[J];Materials Science and Engineering of Powder Metallargy;2001-01
4 Wang Erde, Liu Jinglei, Liu Zuyan (School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001);The Research Progression on the Kinetics of Extension Solid Solubility Induced by Mechanical Alloying[J];Powder Metallurgy Technology;2002-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 JIA Shu-guo1,2,BIAN Hua-kang1,LIU Ping1,LI Xiang-li1,WU Juan1,ZHENG Mao-sheng3 (1.School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471039,China; 2.Henan Key Laboratory of Advanced Non-ferrous Metals, Luoyang 471039,China; 3.Physics Department,Northwest University,Xi’an 710069,China);Electron theory research on Cu-Cr alloy solid solution[J];Ordnance Material Science and Engineering;2008-05
2 LI Shi-bo~1,XIE Jian-xin~2,CHEN Shu~2,ZHAO Zhi-yi~2(1.School of Mechanical and Electronic Control Engineering,Institute of Materials Science and Engineering,Beijing Jiaotong University,Beijing 100044,China;2.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China);Mechanisms of W-Cu solid solution formed by mechanical alloying[J];Materials Science and Technology;2006-04
3 ZHANG Rui feng,SHEN Ning fu (Research Center for Materials,Zhengzhou University of Technology,Zhengzhou\ 450002,China);Review and Prospect of Researches on Rapidly Solidified High-strength High-conductivity Copper Alloys[J];Materials Science and Engineering;2001-01
4 Ma Fengcang Ni Feng Yang Dixin (Material Science and Engineering Department of Luoyang Institute of Technology,Luoyang 471039,China);The Present Situation of Preparation Methods of CuCr Alloy Materials[J];Development and Application of Materials;2002-03
5 Liu Fengxiao, He Yuehui, Liu Yong, Huang Baiyun, Li Zhi (Central South University, Changsha 410083, China);Present Status and Future Prospects for PM TiAl-Based Alloy Sheet[J];Rare Metal Materials and Engineering;2005-02
6 Chen Xinliang, Wu Ping, Zhao Ci, Li Zhiqing, Jiang Enyong (Tianjin University, Key Lab of Advanced Ceramics and Machining Technology for Ministry of Education, Tianjin 300072, China);Microstructure and Thermal Stability of Mechanically Milled Al-10%Ti Powder Mixture[J];Rare Metal Materials and Engineering;2005-03
7 Ma Jinfang, Hu Lanqing, Xu Bingshe (Key Laboratory of Interface Science and Engineering of Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China);Substance Transfer Phenomenon in the Process of High-Energy Shot Peening[J];Rare Metal Materials and Engineering;2007-04
8 CUI Xiao long, QI Min, WANG Lai ( Dept. of Mater. Eng., Dalian Univ. of Technol., Dalian 116024, China );Control of oxidation and formation of non-equilibrium phase in Cu-Cr alloys during MA[J];Journal of Dalian University of Technology;2001-02
9 Sun Jinfeng,Li Xiaopu,Wang Mingzhi,Zhao Yucheng (Key Laboratory of Metastable Materials Science & Technology,Yanshan University,Qinhuangdao Hebei 066004,China);Mechanical alloying of Fe-Cu powder and microstructure of solid phase sintered body[J];Powder Metallurgy Technology;2008-05
10 LI Yin-hua1,LIU Ping1,2,TIAN Bao-hong1,JIA Shu-guo1,REN Feng-zhang1,ZHANG Yi2(1.School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China;2.School of Materials Science and Engineering,Xi'an University of Technology,Xi'an 710048,China);Development of Cu-Ni-Si alloy for lead frame[J];Materials Research and Application;2007-04
【Secondary Citations】
Chinese Journal Full-text Database 9 Hits
1 Ouyang Yifang1,2,Zhong Xiaping1,3, Xiao Hongling1, Wu Weiming1(1. Guangxi University, Nanning 530004, China)(2. International Center of Materials Physics, Chinese Academy of Sciences, Shengyang 110016, China)(3. Guilin Institute of Technology, Guilin 541004, China);Progress in Research of Cryomilling[J];Rare Metal Materials and Engineering;2003-06
2 Zhang Zhongwu,Zhou Jingen ,Xi Shengqi,Li Pengliang,Zhang Wenxing,Rang guang(Xi’an Jiaotong University,Xi’an 710049,China);Studies on Thermodynamic and Kinetic and Phase Evolution of W-Ni-Fe Powder during Mechanical Alloying[J];Rare Metal Materials and Engineering;2004-10
3 ZHANG Zhong-wu, ZHOU Jing-en , XI Sheng-qi, RANG guang, LI Peng-liang, ZHANG Wen-xing (School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China);Study on Synthesis and Structure of Mechanically Alloyed W-Ni-Fe Nanocomposite Powders[J];Transactions of Metal Heat Treatment;2004-01
4 ZHANG Zhong wu,RAN Guang,ZHOU Jing en (School of Material Science and Engineering,Xian Jiaotong University,Xian Shaanxi 710049,China);Progress of the Research Work on Tungsten Heavy Alloys[J];Heat Treatment of Metals;2003-02
5 ZHANG Xian sheng 1,RAN Guang 2 (1 Panzhihua Iron and Steel (Group) Corporation Office,Panzhihua Sichuan 617067,China; 2 School of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an Shanxi 710049,China);Review of the Reactive Mechanism in Mechanical Alloying[J];Heat Treatment of Metals;2003-06
6 RAN Guang,ZHOU Jing-en,XI Sheng-qi,CAO Li-qiang (School of Material Science and Engineering,Xi'an Jiaotong University,Xi'an Shaanxi 710049,China);Microstructure and Characteristics of the Al-Pb-Si-Sn-Cu Bearing Bush Alloy[J];Heat Treatment of Metals;2004-02
7 RAN Guang,ZHOU Jing-en,XI Sheng-qi,LI Peng-liang (School of Materials Science and Engineering,Xi′an Jiaotong University,Xi′an Shaanxi 710049,China);Study on Phase Transformation and Thermodynamic and Kinetic of Al-Pb Powder During Mechanical Alloying[J];Heat Treatment of Metals;2004-07
8 LI Gusong;DING Bingzhe;MIAO Weifang;YE Lilei;GUO Jianting(State Key La boratory of RSA,Institute of Metal Research,The Chinese Academy of Sciences,Shenyang)(Manuscript received 30 June,1993;in revised form 18 August,1993);PREPARATION OF Ni-Al INTERMETALLIC COMPOUNDS BY MECHANICAL ALLOYING[J];Acta Metallrugica Sinica;1994-14
9 XIA Dongshen;GUO Jianting;LI Bo;LI Gusong(Institute of Metal Reserch, The Chinese Academy of Sciences, Shenyang 110015;Science College, Northeastern University, Shenyang 110006) Correspondent: GUO Jianting, professor, Tel: (024)23843531-55493, Fax: (024);INVESTIGATON ON MECHANICAL ALLOYING OF NiAI(Co)[J];ACTA METALLRUGICA SINICA;1999-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved