Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Materials Engineering》 2009-08
Add to Favorite Get Latest Update

Effect Factors of Extrusion Deforming of High Al Content Magnesium Alloy

LI Jing-yuan1,CHEN Yu-lai1,CHEN Chang-jiang1,CAO Liang2(1 University of Science and Technology Beijing,Beijing 100083,China;2 Jiangyin Xingcheng Special Steel Works Co.,Ltd.,Jiangyin 214400,Jiangsu,China)  
Based on the composition standards of AZ91-D magnesium alloy,four kinds of Mg-Al-Zn high strength magnesium alloys with various Al,Zn and Mn contents were designed.Hot extrusion with different dies and pre-treatment were carried out on 650t extruder.The results show that Al and Zn alloy elements have a great impact on the extrusion deforming,but the effect of Mn has not been observed.Homogenization pre-treatment can raise the plasticity of materials in a certain degree.Streamlined dies can make the material to flow better than flat dies and conical dies.After extrusion,the strength and plasticity of the employed alloys are greatly improved.The grain is refined to average diameter of 20μm,the tensile strength reaches 340MPa,and the elongation is beyond 12%.
【Fund】: 973资助项目(2007CB613703);; 广东省重大科技专项资助项目(2008A090300004)
【CateGory Index】: TG379
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 LI Xiuhua~1 CHEN Lijia~2 BAI Yu~2(1.College of Aerospace Engineering,Shenyang Institute of Aeronautical Engineering,Liaoning Shenyang 110034;2.Shenyang University of Technology,Liaoning Shenyang 110023);Effect of hot extrusion and subsequent heat treatment on the microstructure and mechanical property of AZ91 Magnesium Alloys[J];Journal of Shenyang Institute of Aeronautical Engineering;2006-04
2 JIN Junbing WANG Zhixiang LIU Xuefeng XIE Jianxin School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083;EFFECT OF HOMOGENIZING TREATMENT ON MICROSTRUCTURES AND MECHANICAL PROPERTIES OF AZ91 MAGNESIUM ALLOY[J];Acta Metallurgica Sinica;2006-10
3 ZHANG Yan,WANG Ning,LI Feng,HONG Xia(School of Material Science and Engineering,UST Inner Mongolia,Hohhot 010051,China);Effects of process parameters and heat treatment on squeeze casting AZ91 D alloy's mechanical properties[J];Light Alloy Fabrication Technology;2006-12
4 XU Chun-jie,ZHANG Zhong-ming,GUO Xue-feng,JIA Shu-zhuo,LIU Li,Meng Ling-nan(Faculty of Material Science and Engineering,Xi'an University of Technology,Xi'an 710048,China);Microstructure and Mechanical Properties of Extruded AZ91D Alloy[J];Journal of Xi'an University of Technology;2005-04
5 WANG Xiao-ming,ZHANG Jin-shan,XU Chun-xiang,PEI Li-xia,LI Tian-bao,ZHOUI Cui-Lan,LIANG Wei(Institute of Material Science and Engineering,Taiyuan University of Technology,Taiyuan 030024,China);The Influence of Magnesium-Based Master Alloy on the Microstructure and Properties of ZA85[J];Research Studies on Foundry Equipment;2006-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LI Shu-bo~1,WU Kun~2,ZHENG Ming-yi~2,XIONG Shou-mei~1(1 Key Laboratory for Advanced Manufacturing by MaterialsProcessing Technology,Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China;2 School of Materials Scienceand Engineering,Harbin Institute of Technology,Harbin 150001,China);Effect of Extrusion on Mechanical Properties of AZ91 Cast Magnesium Alloy[J];Journal of Materials Engineering;2006-12
2 WU Min~1,XUE Yu~2 (1 School of Mechanical Engineering,Liaoning Shihua University,Fushun 113001;2 Research Institute of Lanzhou Petroleum Company,Lanzhou 730060);Effect of Zn on Microstructure and Property of Sn3.5Ag0.5Cu Solder[J];Materials Review;2008-S3
3 ZHANG Guangjun~1,LONG Siyuan~2,CAO Fenghong~1 (1 College of Mechanical Engineering,Chongqing University,Chongqing 400044;2 National Engineering Research Center for Magnesium Alloys,Chongqing University Chongqing 400044);Research on Microstructure and Properties of Hot Extruded AZ81 Magnesium Alloy[J];Materials Review;2008-S3
4 JIA Shu-zhuo,XU Chun-jie,GUO Xue-feng,ZHENG Shui-yun,ZHANG Zhong-ming,L Tao(School of Materials Science and Engineering,Xi'an University of Technology,Xi'an,710048,China);Influence of solution heat treatment and ageing on microstructure and properties of in-situ Mg_2Si/Mg-Al matrix composite[J];Transactions of Materials and Heat Treatment;2006-06
5 ZHANG Ju-mei~(1,2),JIANG Bai-ling~1,WANG Zhi-hu~1,YUAN Sen~1,XIA Peng-ju~1(1.School of Materials Science and Engineering,Xi'an University of Technology, Xi'an 710048,China;2.Department of Materials Science and Engineering,Xi'an University of Science and Technology,Xi'an 710054,China);Effects of solution temperature on precipitation of β-Mg_(17)Al_(12) phase and mechanical properties of AZ80 magnesium alloy[J];Transactions of Materials and Heat Treatment;2007-06
6 WANG Qiang,GAO Jia-cheng,WANG Yong,LI Wei,NIU Wen-juan(College of Material Science and Engineering,National Engineering Research Center for Magnesium Alloys,Chongqing University,Chongqing 400044,China);Effect of homogenizing annealing on microstructure and mechanical properties of WE43 magnesium alloy[J];Transactions of Materials and Heat Treatment;2008-04
7 YANG Jun-gang,ZHAO Mei-juan,JIANG Bai-ling(Department of Materials Science and Engineering,Xi'an University of Technology,Xi'an 710048,China);Effect of homogenizing annealing on microstructure and mechanical properties of AZ91D magnesium alloy[J];Transactions of Materials and Heat Treatment;2008-04
8 ZHANG Ju-mei1,2,JIANG Bai-ling1,WANG Zhi-hu1,YUAN Sen1,XIA Peng-ju1 (1.School of Materials Science and Engineering,Xi′an University of Technology,Xi′an Shaanxi 710048,China; 2.Department of Materials Science and Engineering,Xi′an University of Science & Technology,Xi′an Shaanxi 710054,China);Effects of Solution and Aging on Microstructure of AZ80 Magnesium Alloy[J];Heat Treatment of Metals;2007-10
9 WANG Zhi-hu1,ZHANG Ju-mei1,2,JIANG Bai-ling1(1.School of Materials Science and Engineering,Xi'an University of Technology,Xi'an Shaanxi 710048,China;2.School of Materials Science and Engineering,Xi'an University of Science & Technology,Xi'an Shaanxi 710054,China);Effects of heat treatment on microstructure and mechanical properties of AZ61A magnesium alloy[J];Heat Treatment of Metals;2009-01
10 ZHANG Zhong-ming,XU Chun-jie,JIA Shu-zhuo,GUO Xue-feng(School of Materials Science and Engineering,Xi'an University of Technology,Xi'an 710048,China);Microstructure and mechanical properties of Mg-Al-Si alloy with high content of silicon[J];Transactions of Materials and Heat Treatment;2009-05
China Proceedings of conference Full-text Database 2 Hits
1 ZHANG Dingfei ZHANG Hongju LIU Rongshen DUAN Hongling SHI Guoliang (College of Materials Science and Engineering,Chongqing University,Chongqing 400044);Solidification Analysis of AZ91D Magnesium Alloy[A];[C];2007
2 ZHANG Kang,ZHANG Kui~*,LI Xinggang,LI Yongjun,MA Minglong,XU Yulei State Key Lab for Fabrication & Processing of Non-ferrous Metals,Beijing General Research Institute for Non-ferrous Metals,Beijing 100088;Influence of homogenization on the microstructure of AZ151 Mg alloy[A];[C];2008
【Secondary Citations】
Chinese Journal Full-text Database 9 Hits
1 PENG Jian, ZHANG Ding-fei, YANG Chun-mei, DING Pei-dao(College of Materials Science and Engineering,Chongqing University, Chongqing 400044, China);Homogenizing Research on ZK60 Magnesium Alloy Ingot[J];Journal of Materials Engineering;2004-08
2 LIU Zheng;WANG Zhongguang(State Key Laboratory for Fatigue and Fracture of Materials, Institute of Metal Research,The Chinese Academy of Sciences, Shenyang 110015)WANG Yue; LI Feng; ZHAO Huijie(Shenyang Polytechnic University);ON MOULD FILLING AND SOLIDIFICATION OF HIGH PRESSURE MAGNESIUM DIE CASTING PROCESS[J];CHINESE JOURNAL OF MATERIAL RESEARCH;1999-06
3 HUANG Guang-sheng, WANG Ling-yun, HUANG Guang-jie, PAN Fu-sheng(College of Materials Science and Engineering, Chongqing University, Chongqing 400030, China);HomogenizingEffect on the Microstructure and Properties of AZ31B Magnesium Alloy[J];Journal of Chongqing University(Natural Science Edition);2004-11
4 HUO Hong-wei 1,2 , LI Ying 1, WANG Fu-hui 1(1. State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences,Liaoning Shenyang 110016,China;2. College of Life and Chemistry Science, Shenyang Normal University, Shenyang 110034,China);Effects of Heat Treatment on Microstructure and Corrosion Behavior of AZ91D and AM50 alloys[J];Transactions of Metal Heat Treatment;2003-04
5 ZHANG Shi hong 1, WANG Zhong tang 2, XU Yi 1, ZHOU Wen long 1 (1.Institute of Metal Research, Chinese Academy of Sciences,Shenyang 110016,China; 2.Shenyang Institute of Technology, Shenyang 110016,China);Plastic Forming Technology of Magnesium Alloy Products[J];Metal Forming Technology;2002-05
6 LIU Jin-hai, LI Guo-lu, LIU Gen-sheng (School of Materials Science and Technology, Hebei University of Technology, Tianjin 300132, China);Development of Magnesium Alloy Forming Technology and Its Application[J];Light Alloy Fabrication Technology;2001-08
7 GUO Xuefeng, HUANG Zhenghua, ZHANG Zhongming( Xi'an University of Technology,Xi'an 710048,China);Effects of Ce/Ca on Microstructure and Mechanical Properties of AZ91D Magnesium Alloy[J];Journal of Xi'an University of Technology;2003-03
8 Zi Bingtao 1* , Wang Hui 2 (1. Institute of Metal Materials Research, 2. Institute of Mining Resource Research, Beijing General Research Institute of Mining & Metallurgy, Beijing 100044, China);Magnesium Alloy and Its Applications in Industry[J];Chinese Journal of Rare Metals;2004-01
9 ZHANG Yong zhong 1,ZHANG Kui 1,CUI Dai jin 2,WU Xu ping 2,FAN Jian zhong 1, CUI Bo 2,ZHENG Yu xin 2,LEI Jian 2 (1.Beijing General Research Institute for Non ferrous Metals,Beijing 100088,China; 2.Dong Feng Carburetor Limited Corporation,S;Die-Casting Process and Properties of AZ91D Magnesium Alloys[J];FOUNDRY;2000-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved